2021

A. Mandal, A. Ghosh, D. Chakrabarti, C. Davis, “Effect of coiling temperature on impact toughness of hot rolled ultra-high-strength multiphase steel strips”, Materials Science and Engineering: A, Vol. 824, pp. 141796 (2021)

R. Rejeesh, A. Bhattacharya, C. Haldar, R. Mitra, D. Chakrabarti, C. R. Das, S. K. Albert, A. K. Bhaduri, “Relative effect of B and N concentrations on the microstructural stability and mechanical properties of modified 9Cr-1Mo steel”, Journal of Alloys and Compounds, Vol. 867, pp. 158971 (2021)

R. K. Barik, A. Ghosh, Md. Basiruddin Sk, S. Biswal, A. Dutta, D. Chakrabarti, “Bridging microstructure and crystallography with the micromechanics of cleavage fracture in a lamellar pearlitic steel”, Acta Materialia, Vol. 214, pp. 116988 (2021)

J. Sarkar, P. Modak, S. B. Singh, D. Chakrabarti, “Effect of cooling-rate during solidification on the structure-property relationship of hot deformed low-carbon steel”, Materials Chemistry and Physics, Vol. 257, pp.123826 (2021)

2020

S. M. Hasan, S. Kumar, D. Chakrabarti, S. B. Singh, “Effect of prior austenite grain size on the formation of carbide-free bainite in low-alloy steel”, Philosophical Magazine, Vol. 100 (18), pp. 2320-2334 (2020)

N. K. Tewary, S. K. Ghosh, A. Mandal, D. Chakrabarti, S. Chatterjee, “Effect of annealing on the microstructure, texture and mechanical properties of a dual-phase ultrahigh-strength TWIP steel”, Metallurgical and Materials Transactions A, Vol. 51 (9), pp.4483-4498 (2020)

V. Jain, A. Chatterjee, S. Patra, D. Chakrabarti, A. Ghosh, “Effect of tilt and twist angles on the cleavage crack propagation in ferritic steel”, International Journal of Fracture, Vol. 225 (1), pp. 115-121 (2020)

A. Mandal, S. Morankar, M. Sen, S. Samanta, S. B. Singh, D. Chakrabarti, “A Descriptive Model on the Grain Size Dependence of Deformation and Martensitic Transformation in Austenitic Stainless Steel”, Metallurgical and Materials Transactions A, Vol. 51 (8), pp.3886-3905 (2020)

A. Mandal, B. Syed, K. K. Bhandari, B. Bhattacharya, A. Deb, S. B. Singh, D. Chakrabarti, “Bending induced anisotropy in properties: A mechanistic study”, Materials Science and Engineering: A, Vol. 788, pp.139521 (2020)

P. P. Dey, P. Modak, A. Ghosh, D. Chakrabarti, P. S. Banerjee, M. Ghosh, “Investigation of phase evolution of Al–Si–Mg coating on hot dipped interstitial-free steel”, Results in Materials, Vol. 6, pp.100078 (2020)

S. M. Hasan, A. Ghosh, D. Chakrabarti, S. B. Singh, “Orientation Dependence of Deformation-Induced Martensite Transformation During Uniaxial Tensile Deformation of Carbide-Free Bainitic Steel”, Metallurgical and Materials Transactions A, Vol. 51 (5), pp.2053-2063 (2020)

P. P. Dey, P. Modak, P. S. Banerjee, D. Chakrabarti, A. H. Seikh, H. S. Abdo, M. Luqman, M. Ghosh, “Studies on the characterization and morphological features of the coating on interstitial free steel dipped in molten Al-Si-Mg alloy at 800° C”, Journal of Materials Research and Technology, Vol. 9 (3), pp. 4788-4805 (2020)

S. Roy, B. S. Saini, D. Chakrabarti, N. Chakraborti, “Mechanical properties of micro-alloyed steels studied using a evolutionary deep neural network”, Materials and Manufacturing Processes, Vol. 35 (6), pp.611-624 (2020)

S. M. Hasan, S. Kumar, D. Chakrabarti, S. B. Singh, “Understanding the effect of prior bainite/martensite on the formation of carbide-free bainite”, Philosophical Magazine, Vol. 100 (7), pp.797-821 (2020)

G. Mandal, S. K. Ghosh, D. Chakrabarti, S. Chatterjee, “Influence of TMCP Parameters on Structure and Properties of Low Carbon Cu Bearing Ultra-High Strength Steel”, Physics of Metals and Metallography, Vol. 121 (3), pp.269-275 (2020)

S. M. Hasan, M. Ghosh, D. Chakrabarti, S. B. Singh, “Development of continuously cooled low-carbon, low-alloy, high strength carbide-free bainitic rail steels”, Materials Science and Engineering: A, Vol. 771, pp.138590 (2020)

S. Jaypuria, S. K. Gupta, D. K. Pratihar, D. Chakrabarti, M. N. Jha, “Effect of Amplitude Oscillation on Spiking in Electron Beam Welding of Copper Plate”, Advances in Materials and Manufacturing Engineering, pp. 405-411 (2020)

2019

S. Jaypuria, S. K. Gupta, S. S. Fazeela, D. K. Pratihar, D. Chakrabarti, M. N. Jha, “Study of Metallurgical and Mechanical Behavior of Laser Butt-Welded Dissimilar Joint of Inconel and Stainless Steel”, ASME International Mechanical Engineering Congress and Exposition, Vol. 59384, pp.IMECE2019-12238, V02BT02A036 (2019)

S. Behera, R. K. Barik, M. B. Sk, R. Mitra, D. Chakrabarti, “Recipe for improving the impact toughness of high-strength pearlitic steel by controlling the cleavage cracking mechanisms”, Materials Science and Engineering: A, Vol. 764, pp.138256 (2019)

N. K. Tewary, S. K. Ghosh, D. Chakrabarti, S. Chatterjee, “Deformation behaviour of a low carbon high Mn TWIP/TRIP steel”, Materials Science and Technology, Vol. 35 (12), pp.1483-1496 (2019)

R. Pradhan, A. Karmakar, M. Ghosh, D. Chakrabarti, S. Mukherjee, “Effect of thermomechanical processing on microstructural evolution in precipitation strengthened ferrite steel”, SN Applied Sciences, Vol. 1 (7), pp.1-15 (2019)

S. Jaypuria, D. Chakrabarti, D. K. Pratihar, M. N. Jha, Effect of Beam Oscillations on Formation of Defects in Electron Beam Welding of Copper Plate”, International Manufacturing Science and Engineering Conference, Vol. 58752, pp. MSEC2019-2943, V002T03A046 (2019)

D. Chakrabarti, A. K. Chakrabarti, S. K. Roy, “Improving the Quality of Cast Ingot for the Production of Defect-Free Rolled and Polished Blanks of Silver-Copper Coinage Alloy”, Journal of The Institution of Engineers (India): Series C,Vol. 100 (3), pp.473-479 (2019)

A. Chatterjee, P. Modak, K. Barat, D. Chakrabarti, R. Mitra, “Microstructural Stability During Creep Exposure of 9Cr-1Mo Steel Treated at Different Normalization Temperatures”, Journal of Materials Engineering and Performance, Vol. 28 (5), pp.3076-3093 (2019)

A. Das, S. Tarafder, S. Sivaprasad, D. Chakrabarti, “Influence of microstructure and strain rate on the strain partitioning behaviour of dual phase steels”, Materials Science and Engineering: A, Vol. 754, pp.348-360 (2019)

J. Kar, D. Chakrabarti, S. K. Roy, G. G. Roy, “Beam oscillation, porosity formation and fatigue properties of electron beam welded Ti-6Al-4V alloy”, Journal of Materials Processing Technology, Vol. 266, pp.165-172 (2019)

S. M. Hasan, A. Mandal, S. B. Singh, D. Chakrabarti, “Work hardening behaviour and damage mechanisms in carbide-free bainitic steel during uni-axial tensile deformation”, Materials Science and Engineering: A, Vol. 751, pp.142-153 (2019)

S. Patra, A. Mandal, M. Mandal, V. Kumar, R. Mitra, D. Chakrabarti, “Ferrite grain refinement, grain size distribution, and texture after thermomechanical processing and continuous cooling of Low-C steel”, Metallurgical and Materials Transactions A, Vol. 50 (2), pp.947-965 (2019)

A. Mandal, B. Syed, K. K. Bhandari, B. Bhattacharya, A. Deb, S. B. Singh, D. Chakrabarti, “Cold-bending of linepipe steel plate to pipe, detrimental or beneficial?”, Materials Science and Engineering: A, Vol. 746, pp.58-72 (2019)

K. K. Bhandari, A. Mandal, M. B. Sk, A. Deb, D. Chakrabarti, “Tailoring the crack-tip microstructure: a novel approach”, Philosophical Magazine Letters, Vol. 99 (2), pp.57-66 (2019)

A. Bhattacharya, A. Karmakar, A. Karani, M. Ghosh, D. Chakrabarti, “Processing of ultrafine-grained steels by warm rolling and annealing”, Journal of Materials Engineering and Performance, Vol. 28 (2), pp.753-768 (2019)

A. Bhattacharya, P. K. Bokinala, R. Mitra, D. Chakrabarti, “Relative effect of C and Mn on strength-toughness of medium Mn steels”, Materials Science and Technology, Vol. 35 (1), pp.55-67 (2019)

2018

G. Mandal, SK Ghosh, D. Chakrabarti, and S. Chatterjee, Effects of Thermo-mechanical Process Parameters on Microstructure and Crystallographic Texture of High Ni–Mo Ultrahigh Strength Steel. Metallography, Microstructure, and Analysis, 7(2), (2018), pp.222-238. https://doi.org/10.1007/s13632-018-0432-7. (Collaboration: IIEST Shibpur).

A. Chatterjee, A. Ghosh, A. Moitra, AK Bhaduri, R Mitra, and D. Chakrabarti, Role of hierarchical martensitic microstructure on localized deformation and fracture of 9Cr-1Mo steel under impact loading at different temperatures. International Journal of Plasticity, Vol. 104, (2018), pp. 104–133. https://doi.org/10.1016/j.ijplas.2018.02.002. (Collaboration: IGCAR-DAE).

P. Modak, S. Patra, R. Mitra, and D. Chakrabarti, Effect of Starting As-cast Structure on the Microstructure–Texture Evolution During Subsequent Processing and Finally Ridging Behavior of Ferritic Stainless Steel. Metallurgical and Materials Transactions A, 49(6), (2018). pp. 2219-2234. https://doi.org/10.1007/s11661-018-4566-7. (Collaboration: Jindal Stainless Limited).

S. Chatterjee, A. Chatterjee, and D. Chakrabarti, Intermetallic Precipitation in Low-Density Steel. Metallurgical and Materials Transactions A, 49(6), 2018, pp.2213-2218. https://doi.org/10.1007/s11661-018-4553-z. (Collaboration: Tata Steel).

Sk, Md. Basiruddin, Irshad Alam, and D. Chakrabarti, The role of fibrous morphology on the Charpy impact properties of low carbon ferrite-bainite dual phase steel. Materials Science and Engineering A, Vol. 716, (2018), pp. 208-219, https://doi.org/10.1016/j.msea.2018.01.041.

Md. Basiruddin Sk., Debalay Chakrabarti, and S. Chatterjee. Microstructural engineering and strength-impact toughness prediction in ultra-low carbon bainitic steel. Materials Science and Technology, 34, no. 15, (2018), pp. 1910-1918. (Collaboration: Tata Steel).

Madhumanti Mandal, Sudipta Patra, Kumar Aniket Anand, and Debalay Chakrabarti. An experimental and mathematical study on the evolution of ultrafine ferrite structure during isothermal deformation of metastable austenite. Materials Science and Engineering A, A 731, (2018), pp. 423-437. (Collaboration: RDCIS-SAIL).

Anindya Das, Pinaki Biswas, S. Tarafder, D. Chakrabarti, S. Sivaprasad, Effect of strengthening mechanism on strain rate related tensile properties of low-carbon sheet steels for automotive application, Journal of Materials Engineering and Performance, 27(7), (2018), pp. 3709-3722. (Collaboration: Tata Steel, CSIR-NML).

Sk. Md. Hasan, Debalay Chakrabarti, Shiv Brat Singh, Dry rolling/sliding wear behaviour of pearlitic rail and newly developed carbide-free bainitic rail steels, Wear, 408, (2018), 151-159.

Abhisek Mandal, Anish Karmakar, Debalay Chakrabarti, and Claire Davis, Effect of Alloying and Coiling Temperature on the Microstructure and Bending Performance of Ultra-High-Strength Strip Steel, Metallurgical and Materials Transactions A, 49, no. 12, (2018), pp. 6359-6374. (Collaboration: Univ. of Warwick, UK).

G. Mandal, S.K. Ghosh, D. Chakrabarti, S. Chatterjee, Correlation Between Structure and Properties of Low-Carbon Cu-Ni-Mo-Ti-Nb Ultrahigh-Strength Steel, Journal of Materials Engineering and Performance, 27, no. 12, (2018), pp. 6516-6528. (Collaboration: IIEST Shibpur).

2017

Md B. Sk, B. Syed, A. Chatterjee, A. Lodh, S. Kundu, D. Chakrabarti, Effect of Thermal Exposure on the Charpy Impact Properties of Thermo-Mechanically Treated Reinforcement Steel Bar, Steel Research International, Vol. 88(5), (2017), p. 1600286. (Collaboration: Tata Steel).

A. Das, M. Ghosh, S. Tarafder, S. Sivaprasad and D. Chakrabarti, Micromechanisms of deformation in dual phase steels at high strain rates. Materials Science and Engineering A, Vol. 680, (2017), pp. 249-258. (Collaboration: CSIR-NML).

P.K. Singh, A. Das, S. Sivaprasad, P. Biswas, R.K. Verma, D. Chakrabarti, Energy absorption behaviour of different grades of steel sheets using a strain rate dependent constitutive model, Thin-Walled Structures, Vol. 111, (2017), pp. 9-18. (Collaboration: Tata Steel, CSIR-NML).

M.K. Shah, R. Kumar, S. Sahoo, R.S. Pais, D. Chakrabarti, N. Chakraborti, Optimization of annealing cycle parameters of dual phase and interstitial free steels by multiobjective genetic algorithms. Materials and Manufacturing Processes, Vol. 32(10), (2017), pp. 1201-1208. (Collaboration: Tata Steel).

A. Karmakar, P. Sahu, S. Neogy, D. Chakrabarti, R. Mitra, S. Mukherjee and S. Kundu, Effect of Cooling Rate and Chemical Composition on Microstructure and Properties of Naturally Cooled Vanadium-Microalloyed Steels, Metallurgical and Materials Transactions A, Vol. 48, (2017), pp. 1581–1595. (Collaboration: BARC, Tata Steel).

A. Karmakar, S. Biswas, S. Mukherjee, D. Chakrabarti, Vinod Kumar, Effect of composition and thermo-mechanical processing schedule on the microstructure, precipitation and strengthening of Nb-microalloyed steel, Materials Science and Engineering A, 690, (2017), 158-169. (Collaboration: Tata Steel, RDCIS).

Arya Chatterjee, A. Mitra, Md Basiruddin Sk, R. Mitra, A.K. Bhaduri, and D. Chakrabarti, Effect of Microalloy Precipitates on the Microstructure and Texture of Hot-Deformed Modified 9Cr-1Mo Steel, Metallurgical and Materials Transactions A, Vol. 48(5), (2017), pp.2410-2424. (Collaboration: IGCAR).

Md. Basiruddin Sk., A. Ghosh, N. Rarhi, R. Balamuralikrishnan, and D. Chakrabarti, Effect of Reheating Temperature and Cooling Treatment on the Microstructure, Texture, and Impact Transition Behavior of Heat-Treated Naval Grade HSLA Steel. Metallurgical and Materials Transactions A, Vol. 48, (2017), pp. 3231-3247. (Collaboration: DMRL-DRDO).

A. Karmakar, S. Mukherjee, S. Kundu, D. Srivastava, R. Mitra, and D. Chakrabarti, Effect of composition and isothermal holding temperature on the precipitation hardening in Vanadium-microalloyed steels. Materials Characterization, Vol. 132, (2017), pp.31-40. (Collaboration: Tata Steel, BARC).

J. Baral, J. Swaminathan, D. Chakrabarti, and R.N. Ghosh, Effect of welding on creep damage evolution in P91B steel, Journal of Nuclear Materials, 490, (2017), pp.333-343. (Collaboration: CSIR-NML).

A. Mandal, S. Patra, D. Chakrabarti and S.B. Singh, Effect of rolling and subsequent annealing on microstructure, microtexture and properties of an experimental duplex stainless steel, Metallurgical and Materials Transactions A, Vol.48, (2017), pp 5960–5977.

A. Ghosh, A. Chatterjee, and D. Chakrabarti, Thermo-mechanical processing of steel: effect on microstructure, crystallographic texture and charpy impact transition behaviour. METALLURGIA ITALIANA, Vol. 3, (2017), pp. 29-35.

Kausik Kapat, Pavan Kumar Srivas, Arun Prabhu Rameshbabu, Priti Prasanna Maity, Subhodeep Jana, Joy Dutta, Pallab Majumdar, Debalay Chakrabarti, and Santanu Dhara. Influence of Porosity and Pore-Size Distribution in Ti₆Al₄V Foam on Physicomechanical Properties, Osteogenesis, and Quantitative Validation of Bone Ingrowth by Micro-Computed Tomography, ACS applied materials & interfaces, Vol. 9, No. 45 (2017): 39235-39248.

2016

A. Karmakar, Madhumanti Mandal, Abhisek Mandal, Md. Basiruddin Sk., Subrata Mukherjee, and Debalay Chakrabarti, Effect of Starting Microstructure on the Grain Refinement in Cold-Rolled Low-Carbon Steel During Annealing at Two Different Heating Rates, Metallurgical and Materials Transactions A, Vol. 47, (2016), pp. 268-281. (Collaboration: Tata Steel).

Md. Basiruddin Sk., A.K. Khan, S. Lenka, B. Syed, J. Chakraborty, D. Chakrabarti, Arghya Deb, S. Chandra, S. Kundu, Effect of microstructure and texture on the impact transition behaviour of thermo-mechanically treated reinforcement steel bars, Materials and Design, Vol. 90, (2016), pp.1136-1150. (Collaboration: Tata Steel).

A. Ghosh, P. Modak, R. Dutta, D. Chakrabarti, Effect of MnS inclusion and crystallographic texture on anisotropy in Charpy impact toughness of low carbon ferritic steel, Materials Science and Engineering A, Vol. 654, (2016), pp.298-308. (Collaboration: RDCIS-SAIL).

Abhijit Ghosh, Sudipta Patra, Arya Chatterjee, Debalay Chakrabarti, Effect of Local Crystallographic Texture on the Fissure Formation During Charpy Impact Testing of Low-Carbon Steel, Metallurgical and Materials Transactions A, Volume 47, Issue 6, (2016), pp. 2755-2772.

S. Patra, A. Ghosh, Vinod Kumar, D. Chakrabarti, L. K. Singhal, Deformation induced austenite formation in as-cast 2101 duplex stainless steel and its effect on hot-ductility, Materials Science and Engineering A, Vol. 660, (2016), pp. 61–70. (Collaboration: RDCIS-SAIL, Jindal Stainless Limited).

S. Mandal, N.K. Tewary, S.K. Ghosh, D. Chakrabarti, S. Chatterjee, Thermo-mechanically controlled processed ultra-high strength steel: Microstructure, texture and mechanical properties, Materials Science and Engineering A, Vol. 663, (2016), pp. 126–140. (Collaboration: IIEST Shibpur).

S. Patra, A. Ghosh, J. Sood, L.K. Singhal, A.S. Podder, D. Chakrabarti, Effect of coarse grain band on the ridging severity of 409L ferritic stainless steel, Materials and Design, Vol. 106, (2016), pp. 336-348. (Collaboration: Jindal Stainless Limited).

S. Patra, A. Ghosh, L.K. Singhal, A.S. Podder, J. Sood, Vinod Kumar, D. Chakrabarti, Hot Deformation Behavior of As-Cast 2101 Grade Lean Duplex Stainless Steel and the Associated Changes in Microstructure and Crystallographic Texture, Metallurgical and Materials Transactions A, Vol. 48, Issue 1, (2016), pp. 294–313. (Collaboration: Jindal Stainless Limited, RDCIS-SAIL).

C. Halder, A. Karmakar, S.M. Hasan, D. Chakrabarti, M. Pietrzyk, N. Chakraborti, Effect of Carbon Distribution During the Microstructure Evolution of Dual-Phase Steels Studied Using Cellular Automata, Genetic Algorithms, and Experimental Strategies, Metallurgical and Materials Transactions A, Vol. 47 (12), (2016), pp. 5890-5906. (Collaboration: AGH Univ. of Sci. & Technol., Krakow, Poland).

2015

Arya Chatterjee, D. Chakrabarti, A. Moitra, R. Mitra, A.K. Bhaduri, Effect of deformation temperature on the ductile-brittle transition behaviour of a modified 9Cr-1Mo steel, Materials Science and Engineering A, 630, (2015), pp. 58–70. (Collaboration: IGCAR).

R. Shukla, S.K. Ghosh, D. Chakrabarti, S. Chatterjee, Characterisation of microstructure, texture and mechanical properties in ultra-low-carbon Ti-B microalloyed steels, Met. Mater. Int., 21, (2015), pp. 85-95. (IIEST Shibpur).

Jayashree Baral, S. Satyanarayanan, D. Chakrabarti, R.N. Ghosh, Creep Behavior of P91B Steel in the Presence of a Weld Joint, Materials Science and Engineering A, 631 (2015), pp. 220–229. (Collaboration: CSIR-NML).

Arya Chatterjee, A. Moitra, A. K. Bhaduri, R. Mitra and D. Chakrabarti, Dynamic Fracture Behaviour of Thermo-Mechanically Processed Modified 9Cr-1Mo Steel, Engineering Fracture Mechanics, Vol. 149, (2015), pp. 74-88. (Collaboration: IGCAR).

List of all publications available at : Google Scholar