How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a wired in-ear monitor built for critical listening, stage work and easy cable replacement, choose DCMEKA DEMAKE; if you need a long coiled aux cord to keep a pair of Sony noise-canceling headphones tethered to a mixer, console or handheld device, choose weishan WH-1000XM5.
• DCMEKA DEMAKE's biggest strength: a dual-driver hybrid in-ear monitor with a detachable MMCX cable, so the sound and the hardware can both be upgraded or repaired over time.
• DCMEKA DEMAKE's biggest trade-off: it's a wired, in-ear design with passive sound isolation rather than active noise cancellation, and no wireless mode beyond the Bluetooth mention in its spec sheet.
• weishan WH-1000XM5's biggest strength: a 4-foot coiled cord that stretches to roughly 14 feet, with a screw-on 6.35mm adapter for studio and DJ gear.
• weishan WH-1000XM5's biggest trade-off: it is a cable, not a headphone — it only makes sound if you already own a compatible Sony headset.
• Buy DCMEKA DEMAKE if you want the actual listening device.
• Buy weishan WH-1000XM5 if you already own Sony WH-series headphones and need a longer, sturdier replacement cord.
The DCMEKA DEMAKE (model A09) is a wired in-ear monitor aimed at people who care more about how a mix sounds than about convenience features. It runs a hybrid driver setup with a 16 ohm impedance and 96 dB sensitivity across a 20 Hz to 20,000 Hz range, which in plain terms means it should be easy to drive from a phone, a laptop or a small interface without needing a dedicated amp. The carbon fiber finish sits on a metal enclosure, and it ships with a metal carrying case, a braided 3.9-foot cable and three sizes of silicone tips. That's a practical kit for someone who throws gear in a bag and wants it to survive.
The feature that stands out most to me is the detachable MMCX connector. The gold-plated 1/8" plug has a lock-snap mechanism that rotates 360 degrees, so you can swap in any MMCX cable you like — a shorter one for commuting, a longer one for desk use, or a replacement if the original ever wears out. That's a genuine longevity play, because a failed cable doesn't kill the whole earphone. DCMEKA also states the design blocks roughly 90 percent of ambient noise passively, which is the kind of isolation you get from a good in-ear seal rather than from electronics. For singers, drummers and anyone tracking in a loud room, that's often exactly what you want.
weishan WH-1000XM5: Who It's For
Let's be clear about what this actually is, because the name can mislead: the weishan WH-1000XM5 is a replacement aux cable, not a pair of headphones. It's a 3.5mm TRS male-to-male cord with a coiled PVC jacket, a gold-plated tip, and a twist-lock protruded plug designed to seat firmly in Sony's recessed headphone jacks. It arrives at about 4 feet and stretches to roughly 14 feet, and it includes a 6.35mm (1/4") adapter that screws onto the 3.5mm plug.
That adapter is the whole point for a certain buyer. If you're plugging headphones into a mixing console, a guitar amp, a home stereo receiver or an audio interface, you need that quarter-inch end — and having it screw on means it won't rattle loose mid-session. weishan lists compatibility with a long run of Sony models: WH-1000XM2 through XM6, WH-CH710N, WH-CH720N, MDR-950BT, MDR-1AM2, MDR-7520, ULT WEAR and more. It also mentions PS4, PS5, Switch, Xbox, laptops, tablets, phones and MP3 players, since a standard 3.5mm connection covers a lot of ground.
Who should buy it? Someone who already owns a compatible Sony headset and has lost, damaged or outgrown the stock cable. The coiled design is genuinely useful — it stays tidy at short lengths and reaches across a desk or studio floor when you need it to. The trade-off is that it does nothing on its own. It's also not a wireless solution and won't add a microphone or controls your headset doesn't already have. And if your headphones don't use a 3.5mm jack with that recessed "protruded plug" style, this cable simply won't fit properly.
Side-by-Side: Which Should You Choose?
• Best for actual listening → DCMEKA DEMAKE. It's the complete earphone; the weishan is only a cable.
• Best for cable longevity and upgrades → DCMEKA DEMAKE. The detachable MMCX system means you can replace or upgrade the cable without retiring the earphones.
• Best as a cheap fix for an existing Sony headset → weishan WH-1000XM5. If you already own WH-1000XM-series or MDR headphones, this restores them for desk and wired listening.
• Best for blocking noise without electronics → DCMEKA DEMAKE. Its passive in-ear seal is rated to cut roughly 90 percent of ambient sound.
• Best for travel with a Sony headset → weishan WH-1000XM5. A coiled cord packs small and works with the headphones you already carry.
• Best for singers, drummers and monitoring → DCMEKA DEMAKE. The dual-driver hybrid tuning and sweat-resistant build target performers specifically.
• Best for plugging headphones into a 1/4" jack → weishan WH-1000XM5. That's the adapter's entire reason for existing.
In my opinion, most people searching these two names together are confused about what they're comparing — one is an earphone, the other is a cord. So my answer splits cleanly. If you need something to listen with, buy the DCMEKA DEMAKE: a dual-driver IEM with a detachable MMCX cable and a metal case is a lot of hardware for the money, and the replaceable cable gives it a longer life than most budget in-ears. If you already own a compatible Sony WH-series headset and just need a longer, sturdier wired connection for a desk or studio setup, buy the weishan WH-1000XM5 — the 14-foot coil and 6.35mm adapter solve a specific, real problem. Check the current price on Amazon for whichever one matches your situation before you commit.
No. It's a 3.5mm coiled replacement aux cable with a 6.35mm adapter, designed to work with Sony WH-1000XM-series and similar headphones. You need to already own compatible headphones for it to do anything.
Not directly. The DEMAKE is a wired in-ear monitor with passive sound isolation, not active noise cancellation. It blocks noise through its ear seal, which suits singers and monitoring, but it won't match the electronic cancellation of an over-ear Sony headset.
Yes, provided the device has a 3.5mm jack. Its 16 ohm impedance and 96 dB sensitivity make it easy to drive from everyday devices without extra amplification. If your phone has no headphone jack, you'll need a suitable adapter.
It uses a standard 3.5mm TRS male plug, so it can work with many devices — but the protruded twist-lock plug is shaped for Sony's recessed jacks. If your headphones have a shallow or differently shaped socket, it may not seat properly.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: ASTRO Gaming A10 vs S.I.T.S LED Gaming Headphones, erjigo EDXPro KZ EDX vs keephifi KZ EDX Pro: High Impedance, INSONIXN SK26 vs SZHTFX Sleep Earbuds, Xmenha Flat Sleep Earbuds vs INSONIXN Invisible Mini Sleep