How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-01 · 7 min read · Independent comparison
• DCHAV 3.5mm — biggest strength: it converts a single 3.5 mm output into two RCA male plugs, so it bridges modern devices and older Hi-Fi gear. Gold-plated connectors, copper conductors, colour-coded red/white plugs, 4 ft length, nylon braided jacket.
• DCHAV 3.5mm — biggest trade-off: it makes no sound on its own. It is a cable, not a listening device, and it fits nothing without a 3.5 mm jack on one end and RCA sockets on the other.
• iMangoo Earbuds 3.5mm — biggest strength: a complete listening kit in one package: 13 mm dynamic drivers, 20 Hz–20 kHz range, 32 ohm impedance, 114 dB sensitivity, a right-angle 3.5 mm plug, an in-line remote with mic, and a carrying case.
• iMangoo Earbuds 3.5mm — biggest trade-off: it depends on a 3.5 mm jack being present, so phones and laptops without one need an adapter, and it is a personal listening tool rather than a system connector.
• Who each pick is for: DCHAV 3.5mm for anyone wiring a source into a stereo, receiver, subwoofer, car head unit or speaker with RCA inputs; iMangoo Earbuds 3.5mm for anyone who wants earbuds for music, calls, school, work or gaming.
The DCHAV 3.5mm is an aux-to-RCA adapter cable. One end is a 3.5 mm male TRS plug (the standard 1/8 inch headphone-style jack); the other end splits into two male RCA plugs, red for the right channel and white for the left. It is four feet long, uses gold-plated connectors and copper conductors, and wraps the whole run in a nylon braided jacket that the spec sheet describes as tangle free. The colour coding sounds trivial until you are crouched behind a receiver — then it saves you ten minutes of guessing which plug goes where.
What it does best is solve a mismatch. A phone, tablet, laptop, MP3 player, projector, soundbar or gaming console has a 3.5 mm output. A home theatre speaker, TV, DVD player, amplifier, sound box, car stereo, receiver or subwoofer has red and white RCA inputs. The DCHAV cable is the bridge between the two, and because it is a passive cable there is nothing to charge, pair or configure. The 30-gauge wire and 3-pin layout match a standard stereo signal, so the left and right channels stay separated instead of collapsing into mono.
iMangoo Earbuds 3.5mm: Who It's For
The iMangoo Earbuds 3.5mm are wired in-ear headphones in black plastic, built around 13 mm dynamic drivers. The specs put them at 32 ohm impedance, 114 dB sensitivity and a 20 Hz to 20 kHz frequency range, which is the full audible band — in plain terms, an easy-to-drive set that a phone, Chromebook or console can push without help. The 90-degree right-angle plug is the detail I like most here, because a straight plug sticking out of a pocketed phone or a lap desk is the first thing to fail.
They also include an in-line remote for volume, track control and calls, plus a built-in mic, and they ship with a carrying case. The earbuds themselves are described as lightweight and ergonomically shaped, with the note that they fit securely even in smaller ears — useful if you have struggled with buds that pop out mid-commute. Sound isolation is listed as a feature, though these are in-ear buds rather than sealed over-ears, so expect some reduction in outside noise rather than total quiet.
Buy them if you want one cheap-to-replace pair of wired buds for a Chromebook, a school laptop, a desktop PC, an older iPhone or iPad with a 3.5 mm jack, a Samsung Galaxy, an MP3 player, or a gaming console with a headphone jack. They are also a sensible travel pair for a flight or a commute, and the case keeps them from becoming a knot in your bag. Skip them if your phone has no headphone jack and you have no adapter, or if you need to feed a stereo system rather than your own ears — that is the DCHAV cable's job, not this one's.
• Best for connecting to a stereo, receiver or car head unit → DCHAV 3.5mm. The dual RCA male plugs are exactly what those inputs expect.
• Best for listening to music, calls or games → iMangoo Earbuds 3.5mm. It is a finished headphone with drivers, mic and remote.
• Best for cable durability and tidy routing → DCHAV 3.5mm. Nylon braided jacket, gold-plated plugs, tangle-free construction, 4 ft of length.
• Best for pocket-and-desk abuse → iMangoo Earbuds 3.5mm. The reinforced 90-degree plug is designed to survive repeated bending.
• Best for laptops, Chromebooks and desktops → either, depending on the goal. iMangoo for private listening, DCHAV for feeding a speaker or amplifier.
• Best for a phone with no headphone jack → neither as-is. Both need a 3.5 mm connection, so you would need the right adapter first.
• Best for travel and school → iMangoo Earbuds 3.5mm. Lightweight in-ear fit plus a carrying case make it the portable option.
My Verdict
In my opinion, the honest answer is that these two products are not really rivals — they solve different problems, and the "better" one depends entirely on which problem you have. If I had to pick one for the average shopper reading a headphone comparison, I would buy the iMangoo Earbuds 3.5mm (B0FVFLS3CB): it is a complete, self-contained listening product with drivers, a mic, in-line volume control, a right-angle plug and a case, and it works with the widest spread of everyday devices. The DCHAV 3.5mm is the better choice only for the specific job it was made for — wiring a phone, laptop or TV into an amplifier, receiver, subwoofer or car stereo through RCA. If that is your task, buy the DCHAV cable and skip the earbuds entirely.
how to make aux cable with headphones
You do not need to build anything for most setups. A standard 3.5 mm aux cable carries the same stereo signal as the jack on your headphones, so if you want to send audio from a phone or laptop into a device with a 3.5 mm input, a plain male-to-male aux cable does the job. If the destination has red and white RCA sockets instead, use a 3.5 mm-to-dual-RCA cable like the DCHAV 3.5mm, which splits the single jack into left and right channels.
how to use wired headphones without headphone jack
how do i connect my wired headphones to my phone
Check the phone first. If it has a 3.5 mm jack, plug the iMangoo earbuds straight in — the 32 ohm impedance and 114 dB sensitivity mean a phone drives them easily. If it does not, add the appropriate USB-C or Lightning adapter and plug into that. Once connected, the in-line remote handles volume, track skipping and calls without you touching the screen.
Do these two products work together?
No. The DCHAV 3.5mm ends in two RCA male plugs, and the iMangoo earbuds end in a single 3.5 mm plug. There is no point at which one connects to the other, and neither is designed as an accessory for the other. Buy the DCHAV cable to link a source to a stereo system, and buy the iMangoo earbuds to listen privately.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: ART MyMONITORII Personal Headphone vs Audio-Technica ATH-M40x, ZOpid Earbuds vs BNARQP NE47: Ipx5 Waterproof Headphones, Koss KPH7 vs CookiBlend EVA Protective Case, Empsun Earbuds Headphones vs Rosojodg 2Pcs