International Journal (SCI/SCIE/ SCOPUS):
2024
Jha, P., Das, B., Gupta, R. and Kumar, N, “An experimental analysis of photovoltaic thermal collector with trapezoidal and plain plates: an energy, exergy, and life cycle assessment.”, Applied Thermal Engineering, 2025, Indexed in SCIE, Impact Factor: 6.1, Quartile: Q1
2024
Gupta A., Das B., Arslan E., Das M., Kosan M., Can OF., (2024). Artificial neural networks based computational and experimental evaluation of thermal and drying performance of partially covered PVT solar dryer. Process Safety and Environmental Protection. Indexed by SCIE, Impact Factor-7.8. Accepted
Gupta A., Borah PP, Das B., Mondol, J.D., (2024). Energy and Exergy based performance evaluation of an innovative PV-assisted solar dryer with and without modified absorber. Solar Energy. Indexed by SCIE, Impact Factor-7.8. Accepted
Borkakoti S., Gupta A., Das B., (2024). Environmental and economic assessment of single-slope solar greenhouse dryer for ginger and turmeric drying in north-eastern region of India. Journal of Stored Products Research. Indexed by SCIE, Impact Factor-2.7. Accepted
Pandey V.K., Prakash O., Ahmad A., Das B., Sharma S., Awwad F., Khan M., Ismail E. (2024). Enhancing Solar Energy Collection Efficiency: Investigating the Performance of Parabolic Trough Solar Collectors Utilizing Al2O3 and Therminol VP-1 Nanofluids. Energy Exploration & Exploitation. Indexed by SCIE, Impact Factor-2.7. Accepted.
Safari S., Esmaeilion F., Rabanian A., Jamali D. H., Negi S., Hoseinzadeh S., Sayedin F., Bhoglla S.S., Assad M. El. Haj, Das B., Ehyaei M. A., Ahmadi A., Soltani M., Afshari H. (2024). Sustainable hydrogen production through water splitting: a comprehensive review. Environment, Development and Sustainability. Indexed by SCIE, Impact Factor-4.7. Accepted.
Kumar L., Prakash O., Ahmad A., Das B., Brar L.S. (2024). Performance evaluation and development of FE modeling for passive greenhouse solar dryer for potato chip drying. Environmental Progress & Sustainable Energy. Indexed by SCIE, Impact Factor-2.8. Accepted.
Kumar L., Prakash O., Pandey V.K., Ahmad A. and Das B. (2023) Development of Finite‐Element Model for Drying of Tomato Flakes under Passive Greenhouse Dryer: Experimental Validation and Optimization Potential. Energy Technology. Indexed by SCIE, Impact Factor-3.8. Accepted
2023
Borah PP., Pathak KK., Gupta A., Roy S., Das B. (2023). Experimental study of a solar air heater with modified absorber plate through square obstacles with threaded pin fins. Applied Thermal Engineering. Indexed by SCIE, Impact Factor-6.46. Accepted https://doi.org/10.1016/j.applthermaleng.2023.120544
Bharti A., Debbarma S., Das B. (2023). Effect of hydrogen enrichment and TiO2 nanoparticles on waste cooking palm biodiesel run CRDI engine. International Journal of Hydrogen Energy. Indexed by SCIE, Impact Factor-7.13. Accepted
Jha P., Das B., Gupta R., Mondol, JD., Ehyaei, MA. (2022). Review of recent research on photovoltaic thermal solar collectors. Solar Energy. Indexed by SCIE, Impact Factor-7.18. Accepted
Roy S., Biswas A, Das B. (2023). Effect of leading-edge protrusion shapes for passive flow control measure on wind turbine blades. Ocean Engineering. Vol. 269, 113688. https://doi.org/10.1016/j.oceaneng.2023.113688. Indexed by SCIE, Impact Factor-4.37.
Gupta A., Das B., Biswas A, Mondol J.D. (2023) Assessment of performance and quality parameters for drying neem leaves in a photovoltaic-thermal solar dryer. Thermal Science and Engineering Progress, (Accepted). Indexed by SCIE, Impact Factor-4.56
Reddy J., Jagadish, Das B. (2023) Experimental Investigation and Optimization of sand-coated solar air collector parameters by fuzzy-MCDM integrated decision approach. Journal of Thermal Analysis and Calorimetry. Indexed by SCIE, Impact Factor-4.75.
Chakraborty O., Das B, Gupta R. (2023). Thermal performance evaluation of a Trough Collector having different inserts and working with hybrid nanofluid. Energy and Environment. Indexed by SCIE, Impact Factor-2.95. Accepted.
Chakraborty O., Das B, Gupta R. (2023). Performance of Parabolic Trough Solar Collector with Spinning Star Inserts in Receiver Tube with Hybrid Nanofluid. Journal of Process Mechanical Engineering. Accepted. Indexed by SCIE, Impact Factor-1.6.
Thota R., Biswas A, Sengupta A., Das B. (2023). Experimental investigation of solar evacuated tube collector with multi-walled carbon nanotube-water-based nanofluids. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. Accepted. Indexed by SCIE, Impact Factor-2.91.
Das S., Das B. (2023) Influence of varying Injection Parameters on the Engine Characteristics of Hydrogen enriched Palm Fueled CRDI Diesel Engine. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. Accepted. Indexed by SCIE, Impact Factor-2.91.
Das S., Das B., Biswas A. (2022) Energy and exergy analysis of a solar-thermal air collector design utilizing a novel jet impingement technique: An experimental study. Journal of Thermal Analysis and Calorimetry. Indexed by SCIE, Impact Factor-4.4. Accepted
Ranjan A., Biswas A, Sengupta A., Das B. (2023) Computational investigation of an innovative photovoltaic thermal collector with spiral shaped absorber using bifluid coolant. International Journal of Environmental Science and Technology. (Accepted) Indexed by SCIE, Impact Factor-2.86.
Das S., Das B., Biswas A. (2023) Machine learning-based modeling using ANN for performance prediction of a solar air heater design with jet impingement. Thermal Science and Engineering Progress. Indexed by SCIE, Impact Factor-4.56
Chakraborty O., Roy S., Debnath BK, Negi S., Rosen MA, Safari S., Assad MEH, Gupta R., Das B., (2023) Energy, exergy, environment and techno-economic analysis of parabolic trough collector: A comprehensive review. Energy & Environment. Indexed by SCIE, Impact Factor-4.2
Das S., Debnath BK, Negi S., Das B., Safari S., Reddy BV, Debbarma S., Ehyaei MA., (2023) A comprehensive review into the effects of different parameters on the hydrogen‐added HCCI diesel engine. Energy Science & Engineering. Indexed by SCIE, Impact Factor-4.2
Singh AP., Gupta A., Biswas A., Das B., (2023) Experimental study of a novel photovoltaic-thermal-thermoelectric generator-based solar dryer for grapes drying. Int J Green energy. Indexed by SCIE, Impact Factor-3.2
Ehyaei M.A., Esmaeilion F., Shamoushaki M., Afshari H., Das B., (2023) The feasibility study of the production of Bitcoin with geothermal energy: Case study. Energy Science & Engineering. Indexed by SCIE, Impact Factor-4.2
Gogada S., Roy S., Gupta A., Das B., Ehyaei MA (2023) Energy and exergy analysis of solar air heater with trapezoidal ribs based absorber: A comparative analysis. Energy Science and Engineering. Indexed by SCIE, Impact Factor-4.2
Kumar L., Prakash O., Pandey V.K., Ahmad A., Das B. (2023) Development of Finite‐Element Model for Drying of Tomato Flakes under Passive Greenhouse Dryer: Experimental Validation and Optimization Potential. Energy Technology. Indexed by SCIE, Impact Factor-3.8. Accepted https://doi.org/10.1002/ente.202300920.
2022
Gupta A., Das B., Biswas A, Mondol J.D. (2022). Sustainability and 4E analysis of novel solar photovoltaic-thermal solar dryer under forced and natural convection drying. Renewable Energy. 188, 1008-1021. https://doi.org/10.1016/j.renene.2022.02.090. Indexed by SCIE, Impact Factor-8.1.
Jha P., Das B., Gupta R. (2022). Energy matrices evaluation of a conventional and modified partially covered photovoltaic thermal collector. Sustainable Energy Technologies and Assessments, Accepted. Indexed by SCIE, Impact Factor-7.63.
Gupta A., Das B., Biswas A, (2022). Development and testing of novel photovoltaic-thermal collector-based solar dryer for green tea drying application. Solar Energy. 231, 1072-1091. https://doi.org/10.1016/j.solener.2021.12.030. Indexed by SCIE, Impact Factor-7.18.
Das S., Das B. (2022). The characteristics of waste-cooking palm biodiesel-fueled CRDI diesel engines: Effect hydrogen enrichment and nanoparticle addition. International Journal of Hydrogen Energy. Indexed by SCIE, Impact Factor-7.13. Accepted
Das S., Das B., Biswas A. (2022) Parametric investigation on the thermo-hydraulic performance of a novel solar air heater design with conical protruded nozzle jet impingement. Applied Thermal Engineering. Indexed by SCIE, Impact Factor-6.4. Accepted
Gugada S., Roy S., Gupta A., Das B. M.A Ehyaei. (2022) Energy and exergy analysis of solar air heater with modified absorber. Energy Science and Engineering. Indexed by SCIE, Impact Factor-4.02. Accepted
Kanth S, Debbarma S, Das B. (2022) Effect of fuel injection parameters on the diesel engine fuelled with biodiesel blends with hydrogen enrichment. International Journal of Hydrogen Energy. Indexed by SCIE, Impact Factor-7.13. Accepted
Das S., Kanth S., Das B., Debbarma S. (2022) Experimental evaluation of hydrogen enrichment in a dual-fueled CRDI diesel engine. International Journal of Hydrogen Energy. 47 (20): 11039-11051. Indexed by SCIE, Impact Factor-7.13. https://doi.org/10.1016/j.ijhydene.2022.01.125
Chakraborty, O., Das, B., Gupta, R., (2022). Performance of parabolic trough collector having rotating receiver: effect of elliptical insert and hybrid nanofluid. International Journal of Energy Research. Accepted. Indexed by SCIE, Impact Factor-5.16.
Roy, S., Das B., Biswas A., Reddy BV. (2022) Flow control of a wind-turbine airfoil with a leading-edge spherical dimple. International Journal of Green Energy. (Accepted). Indexed by SCIE, Impact Factor-2.5.
Reddy J, Jagadish, Negi S., Das B., Ehyaei M., El-Assad M. (2022) Energy and exergy analysis of a trapezoidal absorber plate-based solar air collector. Energy Science & Engineering. (Accepted) Indexed by SCIE, Impact Factor-4.1. DOI: 10.1002/ese3.1091
Ehyaei M.A., Kasaeian M., Abanades S., Razmjoo A., Afshari H., Rosen M.A., Das B. (2022) Natural gas-fueled multigeneration for reducing environmental effects of brine and increasing product diversity: Thermodynamic and economic analyses. Energy Science & Engineering. (Accepted) Indexed by SCIE, Impact Factor-4.1. https://doi.org/10.1002/ese3.1371
Roy K., Das B., Pathak, K.K., Giri A. (2022) Thermo-Hydraulic Analysis of Slightly Inclined Finned Channel Under Natural Convection. Journal of Applied Fluid Mechanics. (Accepted). Indexed by SCIE, Impact Factor-1.4
Das S., Biswas A., Das B. (2022) Numerical analysis of a solar air heater with jet impingement - comparison of performance between jet designs. ASME Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation. 144(1): 011001 Indexed by SCIE, Impact Factor-1.64. https://doi.org/10.1115/1.4051478
Gouda K., Paul, R., Bhowmik S., Das B. (2022). Investigation of the thermomechanical performance of hybrid polymer composite using micro bamboo powder and graphite flakes. Journal of Applied Polymer Science. 139(11): 1-16 Indexed by SCIE, Impact Factor-1.8. https://doi.org/10.1002/app.51806
2021
Ahmadi A., Das B., Ehyaei M.A., Esmaeilion F., Assad M.E.H., Jamali D.H., Koohshekan O., Kumar R., Rosen M. A., Negi S., Bhogilla S. S., Safari S. (2021). Energy, exergy, and techno-economic performance analyses of solar dryers for agro products: A comprehensive review. Solar Energy. 228: 349-373. Indexed by SCIE, Impact Factor-5.7.
Das B., Mondol JD., Negi S., PugsleyA., Smyth M.. (2021). Experimental Performance Analysis of a Novel Sand Coated and Sand Filled Polycarbonate Sheet Based Solar Air Collector. Renewable Energy 164, pp. 990–1004. Indexed by SCIE, Impact Factor-8.01.
Chakraborty, O., Das, B., Gupta, R., (2021). Effect of Spherical Balls insert in Collector Tube of Parabolic Trough Collector by Considering Al2O3 Based Water. Journal of Brazilian Society Mech Sci Engg. Accepted. Indexed by SCIE, Impact Factor-2.22.
Roy, S., Biswas, A., Das, B., (2021). A comprehensive review of the application of bio-inspired tubercles on the horizontal axis wind turbine blade. International Journal of Environmental Science and Technology. (Accepted) Indexed by SCIE, Impact Factor-2.86. https://doi.org/10.1007/s13762-021-03784-3
Chakraborty, O., Roy, S., Das, B., Gupta, R., (2021). Computational analyses of Parabolic Trough Solar Collector in the presence of Helical Coil-Insert. International Journal of Environmental Science and Technology. (Accepted) Indexed by SCIE, Impact Factor-2.86.
Fan, G., Ahmadi, A., Ehyaei, M.A., Das, B. (2021). Energy, exergy, economic and exergoenvironmental analyses of polygeneration system integrated gas cycle, absorption chiller, and Copper-Chlorine thermochemical cycle to produce power, cooling, and hydrogen. Energy, 222, 120008. Indexed by SCIE, Impact Factor-7.17.
Das S., Das B., Misra, R.D. (2021). Emergy-based assessment of biodiesel production in India using edible and non-edible oil. International Journal of Environmental Science and Technology. (Accepted) Indexed by SCIE, Impact Factor-2.86. DOI : 10.1007/s13762-021-03750-z
Gupta A., Das B., Biswas A, Mondol, J.D. (2021). An environmental and economic evaluation of solar photovoltaic thermal dryer. International Journal of Environmental Science and Technology. (Accepted) Indexed by SCIE, Impact Factor-2.86. DOI : 10.1007/s13762-021-03739-8
Chakraborty, O., Roy, S., Das, B., Gupta, R., (2021). Effects of helical absorber tube on the energy and exergy analysis of parabolic solar trough collector – A computational analysis. Sustainable Energy Technologies and Assessments, 44, 101083. Indexed by SCIE, Impact Factor-5.353.
Bhagawat, VV., Roy, S., Das, B., Shah, N., Chowdhury A. (2021). Performance of finned heat pipe assisted parabolic trough solar collector system under the climatic condition of North East India. Sustainable Energy Technologies and Assessments, 45, 101171. Indexed by SCIE, Impact Factor-5.353.
Reddy J., Das B., Jagadish, (2021). Energy, exergy, and environmental (3E) analyses of reverse and cross-corrugated trapezoidal solar air collectors: An experimental study. Journal of Building Energy. 41: 102434. Indexed by SCIE, Impact Factor-5.318
Reddy J., Das B., Jagadish, (2021). Performance evaluation of sand coated absorber-based solar air collector. Journal of Building Energy. 44:102973. Indexed by SCIE, Impact Factor-5.318
Gupta A., Das B., Biswas A. (2021) Performance analysis of stand-alone solar photovoltaic thermal dryer for drying of green chili in hot-humid weather conditions of North-East India. Journal of Food Process Engineering. (Accepted). Indexed by SCIE, Impact Factor-1.95
S. Abanades, H. Abbaspour, A. Ahmadi, B. Das, M. A. Ehyaei, F. Esmaeilion, M. El Haj Assad, T. Hajilounezhad, D.H. Jamali, A. Hmida, H. A. Ozgoli, S. Safari, M. AlShabi, E. H. Bani‑Hani, (2021). A critical review of biogas production and usage with legislations framework across the globe. International Journal of Environmental Science and Technology. (Accepted) Indexed by SCIE, Impact Factor-2.54 https://doi.org/10.1007/s13762-021-03301-6
S. Abanades, H. Abbaspour, A. Ahmadi, B. Das, M. A. Ehyaei, F. Esmaeilion, M. El Haj Assad, T. Hajilounezhad, D.H. Jamali, A. Hmida, H. A. Ozgoli, S. Safari, M. AlShabi, E. H. Bani‑Hani, (2021). A conceptual review of sustainable electrical power generation from biogas. Energy Science & Engineering. (Accepted) Indexed by SCIE, Impact Factor-4.1. https://doi.org/10.1002/ese3.1030
Kumar Sanjeet., Das Supreme., Biswas A., Das Biplab. (2021) CFD study of an innovative solar photovoltaic thermal collector (PVTC) for simultaneous generation of electricity and hot air. International Journal of Power and Energy Systems (Indexed by ESCI / Scopus,)- Accepted.
Kanth S, Anand T, Debbarma S, Das B. (2021) Effect of fuel injection pressure and injection timing of hydrogen enriched rice bran biodiesel fuelled in diesel engine. International Journal of Hydrogen Energy. https://doi.org/10.1016/j.ijhydene.2021.06.087 Indexed by SCIE, Impact Factor-5.8. Accepted
Gouda K., Bhowmik S., Das B. (2021). A review on allotropes of carbon and natural filler reinforced thermomechanical properties of upgraded epoxy hybrid composite. Reviews on Advanced Materials Science. 60: 237–275. https://doi.org/10.1515/rams-2021-0024. Indexed by SCIE, Impact Factor- 1.83
2020
Das B., Mondol JD., Debnath S., PugsleyA., Smyth M., Zacharopoulos A. (2020). Effect of the absorber surface roughness on the performance of a solar air collector: an experimental investigation. Renewable Energy. 152: 567-572. Indexed by SCIE, Impact Factor-8.01 doi: 10.1016/j.renene.2020.01.056
Pathak K.K., Das B., Giri A. (2020). Thermal performance of heat sinks with variable and constant heights: An extended study. Int Journal of Heat Mass Transfer. 146, 118916 , 1-15. Indexed by SCI, Impact Factor- 4.946 doi: 10.1016/j.ijheatmasstransfer.2019.118916
Kanth S., Debbarma S., Das B. (2020). Effect of hydrogen enrichment in the intake air of diesel engine fuelled with honge biodiesel blend and diesel. International Journal of Hydrogen Energy 45: 32521-32533. Accepted. Indexed by SCI, Impact Factor- 4.939
Debbarma S., Misra R.D., Das B. (2020). Performance of Graphene added Palm Biodiesel in a Diesel Engine. Clean Technologies and Environmental Policy; 22, pp. 523–534 . Indexed by SCIE, Impact Factor- 2.599
Kanth S., Debbarma S., Das B. (2020). Experimental investigation of rice bran biodiesel with hydrogen enrichment in diesel engine. Energy Sources Part A: Recovery, Utilization and Environmental Effects https://doi.org/10.1080/15567036.2020.1854391. Accepted. Indexed by SCIE, Impact Factor-1.18
Jha P., Das B., Gupta R. (2020). Performance of air-based photovoltaic thermal collector with fully and partially covered photovoltaic module. Applied Thermal Engineering; 180, pp. 115838 (1-12). https://doi.org/10.1016/j.applthermaleng.2020.115838. Indexed by SCIE, Impact Factor-4.76
Jha P., Mondol J.D., Gupta R., Das B. (2020). Energy Metrics Assessment of a Photovoltaic Thermal Air Collector (PVTAC): A Comparison between Flat and Wavy Collector. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. Accepted. Indexed by SCIE, Impact Factor-1.18
Chakraborty O., Das B., Gupta R., Debbarma S. (2020). Heat transfer enhancement analysis of parabolic trough collector with straight and helical absorber tube. Thermal Science and Engineering Progress, 20. 100718, 1-16. https://doi.org/10.1016/j.tsep.2020.100718 Indexed by SCIE, Impact Factor-4.56
Roy K., Das B. (2020). Influence of property variation on natural convection in a vertical finned channel: An extended study. ASME Journal of Thermal Science and Engineering Application. 13(3): 031019. Indexed by SCI, Impact Factor- 1.54
Roy K., Das B., Giri A. (2020). Laminar Entry Region Mixed Convective Heat Transfer from an Inclined Rectangular Fin Array. Accepted. Int Journal of Numerical Methods for Heat and Fluid Flow. Vol. 30 No. 6, 2020 pp. 3283-3305. Indexed by SCIE, Impact Factor- 1.958
Gouda K., Bhowmik S., Das B. (2020). Synergetic effect of micro-bamboo filler and graphene nanoplatelet on thermomechanical properties of epoxy-based hybrid composite. JOM, The Journal of The Minerals, Metals & Materials Society. Accepted. Indexed by SCIE, Impact Factor- 2.3
Gouda K., Bhowmik S., Das B. (2020). Thermomechanical behavior of graphene nanoplatelets and bamboo micro filler incorporated epoxy hybrid composites. Materials Research Express. Accepted. Indexed by SCIE, Impact Factor- 1.44
Esfandi S., Baloochzadeh S., Asayesh M., Ehyaei MA., Ahmadi A., Rabanian AA., Das B., Costa VAF., Davarpanah A. (2020) Energy, Exergy, Economic, and Exergoenvironmental Analyses of a Novel Hybrid System to Produce Electricity, Cooling, and Syngas. Energies, 13 (23), 6453. Indexed by SCIE, Impact Factor- 2.72 doi:10.3390/en13236453
Debnath S., Das B., Randive P. (2020) Energy and exergy analysis of plain and corrugated solar air collector: Effect of seasonal variation. Int Journal of Ambient Energy. Accepted. Indexed by Scopus, DOI: 10.1080/01430750.2020.1778081
Gupta A., Das B., Mondol, JD. (2020). Experimental and theoretical performance analysis of a hybrid photovoltaic-thermal (PVT) solar air dryer for green chillies. Int Journal of Ambient Energy. Accepted. Indexed by Scopus, DOI: 10.1080/01430750.2020.1734658
Biswakarma S., Roy S., Das B., Debnath BK. (2020). Performance analysis of internally helically v-grooved absorber tubes using nanofluid. Thermal Science and Engineering Progress. Accepted. Indexed by SCIE, DOI: 10.1016/j.tsep.2020.100538, Impact Factor-4.56
Roy S., Das B., Biswas A., Debnath BK. (2020). Energy and Exergy Analysis of a Concrete Based Thermal Energy Storage System. Journal of The Institution of Engineers (India): Series C. Accepted. Indexed by Scopus, DOI: 10.1007/s40032-020-00564-9
Roy K., Das B. (2020). Convective Heat Transfer from an Inclined Isothermal Fin Array: A Computational Study. Thermal Science and Engineering Progress, 17, 100487. Indexed by SCIE, DOI: 10.1016/j.tsep.2020.100487 Impact Factor-4.56
2019
Jha P., Das B., Gupta R. (2019). An experimental study of a photovoltaic thermal air collector (PVTAC): A comparison of a flat and wavy collector. Applied Thermal Engineering. 163, 114344, 1-13. Indexed by SCIE, Impact Factor-4.76
Reddy J., Debnath S., Das B., Jagadish. (2019). Energy and exergy analysis of wavy plate solar air collector using a novel hybrid expert system. Journal of Brazilian Society Mech Sci Engg. 41:397 https://doi.org/10.1007/s40430-019-1901-x . Indexed by SCIE, Impact Factor-1.627
Roy, K., Giri, A., Das B. (2019). A computational study on natural convection heat transfer from an inclined plate finned channel. Applied Thermal Engineering. Volume 159, 113941. https://doi.org/10.1016/j.applthermaleng. 2019.113941. Indexed by SCIE, Impact Factor-4.76
Debnath S., Reddy J., Jagadish, Das B. (2019). An Expert system based modeling and optimization of corrugated plate solar air collector for North Eastern India. J Brazilian Society Mech Sci Engg. 41: 273. https://doi.org/10.1007/s40430-019-1782-z . Indexed by SCIE, Impact Factor-1.627
Roy, K., Das B. (2019). Effect of Property Variation on the Fluid Flow and Thermal Behavior in a Vertical Channel. J Appl Fluid Mech 12(4), 1177-1188. DOI: 10.29252/jafm.12.04.29537 Indexed by SCIE, Impact Factor-1.09
Debnath S., Reddy J., Jagadish, Das B. (2019). Investigation of thermal performance of SAC using Fuzzy logic based expert system. J Mech Sci Tech 33 (8) 4013~4021. DOI 10.1007/s12206-019-0543-3. Indexed by SCIE, Impact Factor-1.194
Debnath S., Reddy J., Jagadish, Das B. (2019). Modeling and optimization of flat plate solar air collector: an integrated fuzzy method. J Renewable Sustainable Energy. 11, 043706-1-13. https://doi.org/10.1063/1.5050896. Indexed by SCIE, Impact Factor-1.51
Jha P., Das B., Rezaie, B. (2019). Significant factors for enhancing the life cycle assessment of photovoltaic thermal air collector. Energy Equipment and Systems 7, 1-25. Accepted.
2018
Debnath S, Das B., Randive P.R., Pandey K.M. (2018). Performance analysis of solar air collector in the climatic condition of North Eastern India. Energy 165, 281-298. https://doi.org/10.1016/j.energy.2018.09.038. Indexed by SCIE, Impact factor-6.08
Debnath S., Das B. (2018) ANN based thermal performance analysis of flat plate solar air collector. Int J Mech Prod Engg Res Dev, 8(6), 765-772. Indexed by Scopus,.
2017
Das B., Giri A., Debnath S. (2017). Conjugate Mixed Convection Heat Transfer from a Shrouded Vertical Non-isothermal Heat Sink, ASME J Therm Sci Engg Appl. DOI: 10.1115/1.4035970. Indexed by SCI, Impact Factor- 0.993
2016
Das B, Giri A, (2016). Combined energy and exergy analysis of a non-isothermal fin array with non-Boussinésq variable property fluid, ASME J Therm Sci Engg Appl, 8, 031010-1-12. doi: 10.1115/1.4033012, Indexed by SCI, Impact Factor- 0.993
Sil BS., Borah A., Deb S., Das B. (2016) Development of river flood routing model using non-linear muskingum equation and excel tool 'GANetXL'. J. Urban Env Engg. 10(2):214-220. DOI: 10.4090/juee.2016.v10n2.214220. Indexed by Scopus, Impact Factor- 0.39.
2015
B Das, Asis Giri, (2015). Mixed convection heat transfer from a vertical fin array in the presence of vortex generator. Int Journal of Heat Mass Transfer, 82, pp. 26–41. doi:10.1016/j.ijheatmasstransfer.2014.11.030. Indexed by SCI, Impact Factor- 4.96
Asis Giri, D. Bhuiyan, B Das, (2015). A study of mixed convection heat transfer with condensation from a parallel plate channel. Int Journal of Thermal Science, 98, pp. 165-178. doi:10.1016/j.ijthermalsci.2015.07.012, Indexed by SCI, Impact Factor- 3.48
Asis Giri, K.K. Pathak, B Das, (2015). A computational study of mixed convective heat and mass transfer from a shrouded vertical non-isothermal fin array during dehumidification process. Int Journal of Heat Mass Transfer, 91, pp. 264–281. doi:10.1016/j.ijheatmasstransfer.2015.07.079, Indexed by SCI, Impact Factor- 4.346
Lingfa P., Das B. (2015). Energy analysis of karanja oil as a supplementary fuel for compression ignition engine, J Urban Env Engg. 9(2): pp. 97-101· doi:10.4090/juee.2015.v9n2.097101, Indexed by Scopus, Impact Factor- 0.39.
2014
B Das, Asis Giri, (2014). Conjugate conduction and convection underneath a downward facing non-isothermal extended surface: A numerical study. Energy Conversion Management, 88, pp. 15–26. doi: 10.1016/j.enconman.2014.08.011, Indexed by SCI, Impact Factor- 8.2
B Das, Asis Giri, (2014). Second law analysis of an array of vertical plate-finned heat sink undergoing mixed convection. Int. Comm. Heat Mass Transfer, 56, pp. 42-49. doi: 10.1016/j.icheatmasstransfer.2014.04.019, Indexed by SCI, Impact Factor- 4.46
B Das, Asis Giri, (2014). Non-Boussineśq Laminar Mixed Convection in a Non-Isothermal Fin Array. Applied Thermal Engg., 63 (1), pp. 447 – 458. doi: 10.1016/j.applthermaleng.2013.11.032., Indexed by SCI, Impact Factor- 4.76
2012
Asis Giri, B Das. (2012). A numerical study on entry region laminar mixed convection over shrouded vertical fin arrays. Int J Thermal Science, 60, pp. 212-224. doi: 10.1016/j.ijthermalsci.2012.05.007, Indexed by SCI, Impact Factor- 3.48
2011
S Debbarma, B Das, Asis Giri, S. Majumder, P.K. Bose. (2011). Back propagation artificial neural network (BPANN) based performance analysis of diesel engine using biodiesel. AIP J Ren Sus Energy 3, 013101. pp. 1-12. doi: 10.1063/1.3517229, Indexed by SCI, Impact Factor- 1.51
Chakraborty O., Das B., Gupta R. (2021.) Impact of Helical Coil Insert in the Absorber Tube of Parabolic Trough Collector. Smart Innovation, Systems and Technologies, 206, pp. 177–187. Indexed by Scopus.
Das, S., Biswas, A., Das, B. (2021). A Review on Solar Drying Applications Using Latent Heat as Energy Storage Media. Lecture Notes in Mechanical Engineering, pp. 305–317. Indexed by Scopus.
Roy, S., Das, B., Biswas. A. (2021). Influence of Camber Ratio and Thickness Ratio on the Airfoil Performance. Lecture Notes in Mechanical Engineering, pp. 729–737. Indexed by Scopus.
Prasant, Roy, S., Das, B., Debbarma, S. (2021). Experimental Evaluation of Sand-Based Sensible Energy Storage System. Lecture Notes in Mechanical Engineering, pp. 563–572. Indexed by Scopus.
Kanth S., Debbarma S., Das B. (2019). Performance of a Diesel Engine Fuelled with Nanoparticle Blended Biodiesel. Key Engineering Materials, 821, 189-194. https://doi.org/10.4028/www.scientific.net/KEM.821.189. Indexed by Scopus.
Banik SR, Chakraborty B, Majumdar S, Reddy J, Das B, Debbarma S, (2019). Optimization Analysis of a Stand-Alone Hybrid Energy System for the Lecture Hall (New Gallery), NIT Silchar, North East India. International Conference in Recent Trends on Electronics & Computer Science (ICRTECS-2019) 18th-19th March 2019, NIT Silchar.
Gupta A., Choudhury S., Das B., Biswas A., Tiwari GN. (2019). Thin layer drying kinetics and experimental analysis of PVT solar dryer for drying tomatoes. SOLARIS-2019, Feb 7-9, 2019, Jamia Milia Islamia, New Delhi.
Debnath S., Randive P., Das B. (2018). Numerical investigation on effect of geometrical configuration of absorber plate on heat transfer enhancement in solar air collector. International Conference on Computational Methods for Thermal Problems, Issue 223309, 2018, Page 841. THERMACOMP 2018, 9 July - 11 July 2018.
Roy K., Das B., Dutta S. (2018). Natural convective heat transfer from an inclined isothermal fin array, International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018), NIT Meghalaya, November 8-10, 2018. https://doi.org/10.1007/978-981-15-0124-1_94
Bhagwat VV, Das B. (2018). Thermal performance of heat pipe with pcm jacket, International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018), NIT Meghalaya, November 8-10, 2018. https://doi.org/10.1007/978-981-15-0124-1_91
Roy S., Das B., Biswas A., Debnath BK. (2018). Computational analysis of sensible energy storage for low temperature application, International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018), NIT Meghalaya, November 8-10, 2018. https://doi.org/10.1007/978-981-15-0124-1_116
Vishwakarma S., Debnath BK, Debnath K, Das B. (2018). Comparative analysis of absorber tubes of parabolic trough solar collector using therminol vp-1 as heat transfer fluid, International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018), NIT Meghalaya, November 8-10, 2018.
Jha P., Das B., Gupta R. (2018). Energy and Exergy Analysis of Photovoltaic Thermal Air Collector Under Climatic Condition of North Eastern India. Energy Procedia, 158,1161–1167. DOI: 10.1016/j.egypro.2019.01.299. Indexed by Scopus.
Debnath S, Das B., Randive P.R. (2018). Influences of pentagonal ribs on the performance of rectangular solar air collector. Energy Procedia 158, 1168–1173. DOI: 10.1016/j.egypro.2019.01.300 Indexed by Scopus.
Das B., Jha P., Rezaie B., Gupta R. (2017). Performance Analysis of Single Glazed Solar PVT Air Collector in the Climatic Condition of NE India, Multidisciplinary Digital Publishing Institute Proceedings 2 (4), 171. doi:10.3390/ecea-4-05021
Biswas Agnimitra, and Das B. (2016). Performance characteristics of simple H-Darrieus vertical axis wind rotor. Published in the conference proceedings of Elsevier conference ICEMS-2016, Jaipur, India. ISBN: 978935254230.
Barma, S.D., Das B. and Giri, A. (2011). Effect of load level on the performance of a biodiesel run dual fuel CI engine using second law analysis. Published in the proceeding of the IEEE conference ICUE-2011, Bangkok, Thailand, 28-30 Sep., 2011. DOI:10.1109/ICUEPES.2011.6497779.
Das B., and Gupta Rajat, (2008). Performance Study of a Two-Bladed H-Darrieus Rotor with Various H/D ratios. Published in the Proceedings of REA-2008, Renewable Energy and Environment for Sustainable Environment, IIT Delhi, India, December 11-13, ISBN: 978-81-7319-993-6, pp. 572-578.
Das B., Debbarma S., Debbarma S., Lingfa P. (2008). Mesua Ferrea Oil: An Environmental Friendly Alternative Fuel for Diesel Engine. Published online for International Conference on Energy Security and Climate Change: Issues, Strategies, and Options (ESCC 2008) at Sofitel Centara Grand, Bangkok, Thailand, August 6-8, 2008.
Das B., Gupta R. (2008). Comparative Study of a Three-Bladed H-Darrieus Rotor with a Two-Bladed H-Darrieus Rotor with Various H/D Ratio. Published in the Proceeding CD of International Conference on Energy Security and Climate Change: Issues, Strategies, and Options (ESCC 2008) at Sofitel Centara Grand, Bangkok, Thailand, August 6-8, 2008.
Das B., Lingfa, P., Mishra, P., Khan, I., Saha, A., (2008). Experimental Investigation of Mesua Ferrea Oil as Alternative Fuel. Published in the Proceeding of International Seminar on Non-Conventional Energy Sources and Urban-Rural Economy in Developing Countries (COGEN-2008), Institution of Engineers, Nagpur, February 9-10, pp. 76-79.
Debnath S., Das B., Randive P.R. (2018). Experimental energy and exergy analysis of flat plate solar air collector having different spacing and tilt angle, Renewable Energy Technologies: Issues and Prospects (RETIP), held at NIT Silchar, during September 17, 2017. AIP Conference Proceedings 1998, 020014. https://doi.org/10.1063/1.5049110
Debbarma S., Das B., Roy B. (2018). Experimental investigation of engine performance of Neem-Karanja mixed biodiesel blend in a CI engine. Renewable Energy Technologies: Issues and Prospects (RETIP), held at NIT Silchar, during September 17, 2017. AIP Conference Proceedings 1998, 020002. https://doi.org/10.1063/1.5049098
Roy, S., Debnath, B.K., Das, B. (2018). Study of Different Techniques to Improve Biogas Generation in the Low Temperature Regions – A Review, in the proceedings of the National Conference on Waste to Energy (NCWEC-18) held at NIT Mizoram, during 28 - 29, Dec, 2018.
Debbarma S., Das B., Lingfa P., Singh R., (2013). Effect of Various Reaction Parameters on the Biodiesel Production Process: A Review. Published in the proceeding of the National Seminar on ‘Recent Advancements in Civil Engineering’, November, 2013, NERIST, Itanagar, India.
Das B., Lingfa P., Muralidhar M., and Kathing C., (2011). Fried Mustard Oil as an alternative fuel. Published in the book, Renewable Energy Technology: Issues and Prospects, Excel India Publishers, ISBN: 93-80697-95-3. pp. 89-92.
Das B., R. Gupta, (2010). Analysis of three-bladed H-Darrieus wind rotor, Proceeding of the National seminar on ‘Renewable Energy Technology: Issues and Prospects (RETIP-2010)’, September 24-25, 2010, NERIST, Itanagar, India.
1. Gouri Shankar, Biplab Das and Radak Blange, “Renewable Energy Technology: Issues and Prospects”, Excel India Publishers, India, September, 2011, ISBN: 93-80697-95-3.
Bhagwat, V.V., Das, B. (2020). Thermal Performance of Heat Pipe with PCM Jacket. Lecture Notes in Mechanical Engineering. pp. 1021-1032
Roy, K., Das, B., Dutta, S. (2020). Natural Convective Heat Transfer from an Inclined Iso-thermal Fin Array. Lecture Notes in Mechanical Engineering. pp. 1055-1068
Roy, S., Das, B., Biswas, A., Debnath, B.K. (2020). Computational Analysis of Sensible Energy Storage for Low-Temperature Application. Lecture Notes in Mechanical Engineering. pp. 1315-1329
Vishwakarma, S., Debnath, B.K., Debnath, K., Das, B. (2020). Comparative Analysis of Absorber Tubes of Parabolic Trough Solar Collector Using Therminol VP-1 as Heat Transfer Fluid. Lecture Notes in Mechanical Engineering. pp. 1227-1240
Kanth S., Debbarma S., Das B., Jagadish (2019) Application of MCDM Technique for the Selection of Biodiesel Fuel Blend for Sustainable Motorization. Book Name: Sustainability Modeling in Engineering, p: 337-358. World Scientific, Singapore. https://doi.org/10.1142/9789813276338_0015
Debbarma S., Das B., Jagadish (2019) Optimization of performance and emissions parameters of a biodiesel run diesel engine: An integrated MCDM approach. Page: 115-138. Book Name: Advanced Multi-Criteria Decision Making for Addressing Complex Sustainability Issues, IGI Global, India. 10.4018/978-1-5225-8579-4.ch006
Bardalai M., Mahanta DK, Das B. (2019) Production and Characterisation of Teak Tree Saw Dust and Rice Husk Biochar. Book name: Pollutants from Energy Sources, 291-306, Springer. DOI: 10.1007/978-981-13-3281-4_14
Das S., Misra RD, Das B. (2019) Sustainability Assessment of Biodiesel Production in India from Different Edible Oil Crops Using Emergy Analysis, 107-134. Book name: Methanol and the Alternate Fuel Economy, Springer. DOI: 10.1007/978-981-13-3287-6_6
Reddy J, Jagadish, Das B. (2018) Study on Effect of Barriers in Green Supply Chain Management Using Modified SAW Technique: A Case Study. Book Name: Optimizing Current Strategies and Applications in Industrial Engineering, IGI Global, India, Page-100-112, DOI: 10.4018/978-1-5225-8223-6, ISBN 13: 9781522582236