We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-01 · 7 min read · Independent comparison
If you want a cheap, universal fix for worn-out or missing silicone tips on everyday Bluetooth earpieces, choose D & K Exclusives Ear Tips Soft; if you need a dedicated wired replacement earbud built specifically for PlayStation VR2, choose REEYEAR PSVR2. These two look like they belong in the same conversation because both deal with small in-ear pieces, but they solve completely different problems.
• D & K Exclusives Ear Tips Soft — biggest strength: you get 8 soft silicone tip covers in one pack, sized small, that stretch to fit most in-ear earphones and Bluetooth earpieces.
• D & K Exclusives Ear Tips Soft — biggest trade-off: it is a consumable accessory, not a device. It refreshes what you already own; it does not add audio hardware, a cable, or a jack.
• REEYEAR PSVR2 — biggest strength: it is a purpose-built single earbud for the PlayStation VR2, with a flexible gooseneck, gold-shielded 3.5mm jack, balanced armature driver and memory-foam noise-isolation tip.
• REEYEAR PSVR2 — biggest trade-off: it is locked to PlayStation VR2 only, ships as one earbud with no other accessories, and is explicitly not an OEM product.
• Who each pick is for: D & K Exclusives for anyone maintaining a drawer full of in-ear buds; REEYEAR for a PSVR2 owner who wants a wired in-ear audio option for the headset.
This is a maintenance product, and it is honest about that. The pack gives you 8 black silicone gel tip covers in a small size, roughly 12mm x 13mm x 23mm, with an inner hole that stretches from about 7mm to 13mm. That stretch range is the whole point — it is what lets one small tip slide onto a wide variety of in-ear earphones and Bluetooth earpieces rather than being machined for one model.
In my opinion, the people who get the most out of this are the ones whose earpiece is otherwise fine. The sound is fine. The battery is fine. The problem is the silicone, which has gone hard, torn, or disappeared into a couch cushion. Replacing the tip is the difference between a headset you keep using and one you quietly stop reaching for. The soft, smooth material is designed to reduce discomfort during long wear, and the ear-hook style fit is meant to keep the bud anchored instead of creeping loose mid-call. There is also a modest argument that a fresh, properly sealing tip helps isolate outside noise and tighten up bass response, simply because the seal is doing its job again.
REEYEAR PSVR2: Who It's For
REEYEAR's earbud is a different animal entirely. It is a single wired earbud made for the PlayStation VR2 and nothing else — the listing is blunt that it does not fit other versions. If you own a PSVR2 and you want an in-ear audio option instead of the attached over-ear style, this is the lane it lives in.
The hardware story is more interesting than a generic bud. It uses a balanced armature driver, which is a design associated with detailed, articulate sound rather than thumping bass, and the brand pairs that with a memory-foam noise-isolation tip that is meant to seal, cut down distortion, and firm up the low end. The gooseneck plug is flexible, which matters on a headset because the cable has to route around your head and the headband without yanking. The 3.5mm jack end is gold-shielded, described as protecting the frequency plugging end and extending the life of the headset. Weight is listed at just 0.02 kg, so it adds essentially nothing to the headset compared with a bulkier attachment.
Who should skip it? Anyone who does not own a PlayStation VR2, full stop. It is also worth flagging the small print: the package contains one earbud only, no extras, and it is not an OEM product. If you want a matched pair of earbuds for general listening, this is not that product. It is a targeted upgrade for one specific headset, and it should be judged on that basis. If you are weighing it against the D & K tips, remember you are comparing a device to an accessory — the price gap reflects that, and you should check the current price on Amazon rather than assume.
Side-by-Side: Which Should You Choose?
• Best for replacing lost or worn tips on earbuds you already own → D & K Exclusives Ear Tips Soft.
• Best for PlayStation VR2 in-ear audio → REEYEAR PSVR2.
• Best for getting multiple spares in one purchase → D & K Exclusives, at 8 tip covers per pack.
• Best for comfort during very long wear → D & K Exclusives, where the soft silicone and ear-hook hold are the core design goal.
• Best for noise isolation via a sealing foam tip → REEYEAR PSVR2, with its memory-foam noise-cancellation eartip.
• Best for build durability around a headset → REEYEAR PSVR2, thanks to the flexible gooseneck and gold-shielded 3.5mm jack.
• Best if you need universal compatibility → D & K Exclusives. The REEYEAR bud is PSVR2-only and will not fit other versions.
In my opinion, the honest answer is that these are not rivals — they are answers to two different questions, and you should buy the one that matches the question you are actually asking. If your PlayStation VR2 needs an in-ear audio solution, I would buy the REEYEAR PSVR2. It is the only one of the two that is an actual audio device, and it is built specifically for that headset, with the balanced armature driver, memory-foam tip, gooseneck and shielded jack all pointed at that one job. If your problem is simply tired silicone on an everyday Bluetooth earpiece or in-ear headphone, I would buy the D & K Exclusives Ear Tips Soft — 8 small tips that stretch to fit, for a fraction of the fuss. Buy the device if you need a device. Buy the tips if you need tips.
what is in ear headset
An in-ear headset is one where the speaker sits inside your ear canal rather than resting on or around your ear. Both products here relate to that category: the D & K Exclusives tips are the silicone interface that goes inside your ear, and the REEYEAR PSVR2 is a complete in-ear earbud with a rounded tip and a 3.5mm wired connection.
how to wear one ear headset
You insert the tip into your ear canal and let the housing sit against the outside of your ear, then route the cable so it does not pull. With the REEYEAR PSVR2 the flexible gooseneck is designed to help with that routing around the PSVR2 headband, and the memory-foam tip is meant to seal and hold without slipping.
how to open headset ear
Opening usually means removing the existing eartip or ear cushion so you can swap it. The D & K Exclusives tips are made to replace old or defective tips on in-ear earphones, and the REEYEAR PSVR2 is installed by following the same procedure as the original PSVR2 earbud, so it is a straightforward swap rather than a teardown.
what is over ear headset
An over-ear headset has cushions that surround your ear instead of sitting inside it. That distinction matters here because the REEYEAR PSVR2 is offered as a lighter in-ear alternative to the attached headphone style on the PSVR2, and the brand notes the low weight as a benefit over that bulkier approach.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Kensington Hi-Fi Headphones vs Yoley Classroom Headphones Bulk, BEVCEFCC Open Ear True vs Cyberix Open Ear, JoySpark Kids vs YINKECASE Hard Headphone Case, jabra vs logitech headset