How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want the lowest-latency wireless path for gaming and a microphone built for voice chat, choose Corsair HS80; if you need marathon battery life, a foldable travel-friendly build, and wired backup for when the battery runs dry, choose iKF T1. Both are over-ear Bluetooth headphones with a low-latency story, but they solve very different problems. One is a gaming headset that happens to do Bluetooth. The other is a travel-and-work headphone that happens to do gaming. Figuring out which camp you're in takes about two minutes.
• Corsair HS80 — biggest strength: a dedicated 2.4GHz low-latency wireless connection (rated around 20ms audio latency) plus Bluetooth 5.2, so you get a proper gaming link and a casual listening link in one headset.
• Corsair HS80 — biggest trade-off: it's a heavier, aluminum-reinforced gaming build with a floating headband, and battery life swings a lot depending on how you use it (RGB and connection type change the numbers dramatically).
• iKF T1 — biggest strength: up to 100 hours of playback on a charge, a foldable frame with retractable arms and rotating ear cups, and a 3.5mm wired cable as a fallback.
• iKF T1 — biggest trade-off: its low-latency figure is 38ms over Bluetooth, roughly double the Corsair's rated latency, and its noise control is sound isolation rather than anything active.
• Who each is for: Corsair HS80 for PC/PlayStation players and streamers who want one headset for gaming and phone calls. iKF T1 for commuters, travelers, and students who want one headphone for music, calls, and the occasional game.
The HS80's headline feature is that it doesn't rely on Bluetooth for its lowest-latency mode. It ships with a wireless USB receiver and runs a 2.4GHz connection rated at up to 50 feet of range, with audio latency listed at 20 milliseconds. That's the number that matters if you're the kind of person who notices a half-second gap between pulling a trigger and hearing it. Bluetooth 5.2 is there too, with a rated range of about 30 feet, so you can pair it to a phone or tablet when you're not at your desk.
The spec sheet is clearly built around voice and competitive play. The microphone is described as broadcast quality, the sound is 24-bit/96kHz over the 2.4GHz link — double what the sheet calls typical for gaming headsets — and the frequency response covers 20Hz to 20kHz with 32 ohm impedance and 119dB sensitivity. There's Dolby Atmos and SonarWorks SoundID in the feature list, and the ear pads are memory foam under breathable cloth, wrapped around a floating headband reinforced with lightweight aluminum. In my opinion, comfort over a three-hour session is exactly where that floating-band design earns its keep.
Buy the HS80 if you game on PC, Mac, PS5, or PS4, you want a real low-latency wireless link rather than a Bluetooth workaround, and you care about mic quality for chat or streaming. Skip it if you mostly listen on the move, you want a headphone that folds flat into a bag, or you'd rather not think about RGB draining your battery.
iKF T1: Who It's For
The iKF T1 Pro is designed around the opposite priority: staying powered for a very long time. The sheet rates it at up to 100 hours of playback on a single charge, with a 2-hour charge time. For a commuter, a student, or someone on a long-haul flight, that's the difference between charging every few days and charging every few weeks. The description even leans into "stay powered for days, not hours," and the numbers back that framing up.
It's also the more portable of the two by design. The frame is foldable with retractable arms and rotating ear cups, so it collapses into a bag instead of sitting on a desk. The enclosure mixes metal, plastic, and PU, and the whole thing is listed at 1.1 pounds — noticeably heftier than the Corsair's 0.35 kg, so this isn't a featherweight, but the ergonomic fit and rotating cups are aimed at long wear. Audio comes from 40mm custom dynamic drivers at 32 ohm impedance, tuned for crisp highs, rich mids, and deep bass rather than a flat monitoring curve.
Two features stand out for everyday use. First, multipoint: it holds a connection to your phone and your laptop at the same time, so a call can come in while you're listening on the computer and you switch without re-pairing. Second, a 3.5mm jack and included aux cable — if the battery ever dies, you plug in and keep going. Low latency over Bluetooth is rated at 38ms, and the built-in mic uses ENC for clearer voice pickup. Noise control is sound isolation, not active cancellation, so it reduces what reaches your ears by sealing around them rather than by processing sound.
Side-by-Side: Which Should You Choose?
• Best for lowest latency → Corsair HS80. Rated at 20ms over its 2.4GHz link versus 38ms for the iKF T1 over Bluetooth.
• Best for battery life → iKF T1. Up to 100 hours on a charge, against 65 hours over 2.4GHz or 130 over Bluetooth for the Corsair — but the Corsair drops to 24 hours over 2.4GHz with RGB on.
• Best for gaming on console or PC → Corsair HS80. Native PC, Mac, PS5, and PS4 support with a bundled USB receiver.
• Best for travel and packing → iKF T1. Foldable with retractable arms and rotating ear cups; the Corsair is a desk-and-couch headset.
• Best for calls across two devices → iKF T1. Multipoint keeps a phone and laptop connected at once.
• Best for voice chat and streaming → Corsair HS80. Broadcast-quality mic plus Dolby Atmos and SonarWorks SoundID in the feature set.
• Best for never being stranded → iKF T1. The 3.5mm jack and included aux cable mean a dead battery isn't the end of the session.
• Best for plush long-session comfort → Corsair HS80. Memory foam pads, breathable cloth, and a floating aluminum-reinforced headband.
If I had to pick one, I'd take the Corsair HS80 — because the thing you can't fake with software is a dedicated low-latency wireless link, and 20ms over 2.4GHz with a broadcast-grade mic is the combination that actually matters for gaming and voice chat. The iKF T1 is the smarter buy if your headphones live in a backpack and you want to forget about charging for a week; its 100-hour battery, multipoint, and 3.5mm fallback are genuinely useful. But for the specific question of low-latency Bluetooth headphones, the Corsair's 2.4GHz mode is the more direct answer, and that's the one I'd spend my money on.
how to make bluetooth headphones low latency
The headphone has to support a low-latency mode, and the source has to match it. The iKF T1 lists a 38ms low-latency Bluetooth mode, and the Corsair HS80 goes further by offering a separate 2.4GHz wireless link rated at 20ms, which sidesteps Bluetooth entirely. If your headphones don't advertise a low-latency mode, no setting will create one.
how to get low latency on bluetooth headphones windows 11
On Windows 11, the practical route is to use a headset's own low-latency connection rather than standard Bluetooth audio. The Corsair HS80 ships with a wireless USB receiver, so plugging that in gives you its 2.4GHz link and the 20ms figure instead of relying on the Bluetooth 5.2 radio. That's the most reliable low-latency path on a PC.
do bluetooth headphones have latency
Yes — Bluetooth audio always involves some encoding and transmission delay, and how much varies by headset and codec. The iKF T1 is rated at 38ms in its low-latency mode, while the Corsair HS80's 2.4GHz connection is rated at 20ms. Lower numbers mean less noticeable lag between what you do and what you hear.
how to get low latency on bluetooth headphones
Start by using the headset's dedicated low-latency mode or, better, its non-Bluetooth connection if it has one — the Corsair HS80's 2.4GHz receiver is the clearest example. Keep the headset close to the source, since the HS80's Bluetooth range is rated at about 30 feet, and use the wired 3.5mm option on the iKF T1 when timing matters most.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: LUDOS FEROX vs JBL Tune 110E, HANJIA Open Ear Headphones vs Xoruezls Real-Time AI Translation, Logitech USB Replacement Receiver vs Razer Kraken Kitty V2, MUSICOZY 5.4 vs AMORNO Headphones: Wireless Travel