Journal

1. Han-Eol Kim*, Min-Seong Kim, Wan-Kyu Yoo, Chang-Yong Kim, Ji-Seok Yun, 2025, Experimental Investigation on Joint Effects in Rock Cutting with a Conical Pick Under Unrelieved Cutting Conditions, Applied Sciences, 15(10), 5578-5593.

2. Han-Eol Kim*, Min-Seong Kim, Wan-Kyu Yoo, Chang-Yong Kim, Experimental Investigation on the Effects of Cutting Direction and Joint Spacing on the Cuttability Behavior of a Conical Pick in Jointed Rock Mass, Applied Sciences, 15(8), 4347-4366.

3. Min-Seong Kim, Sean Seungwon Lee*, 2024, Tracking of Horizontal Alignment of the Long and Large Diameter Uncharged Hole in NATM Tunnel. Underground Space, 16(6), 18-28.

Before CNU (~23.08)

4. Min-Seong Kim, Wan-Kyu Yoo, Wooseok Kim, Sungpil Hwang, Chang-Yong Kim, Sean Seungwon Lee*, 2023. Numerical Study Investigating the Blasting Efficiency of the Long and Large-diameter Uncharged Hole-Boring Method with Deck Charge Technique. Applied Sciences, 13(4), 2099-2111.

5. Min-Seong Kim, Chang-Yong Kim, Myung-Kyu Song, Sean Seungwon Lee*, 2022. Assessment of the Blasting Efficiency of a Long and Large-diameter Uncharged Hole Boring Method in Tunnel Blasting Using 3D Numerical Analysis. Sustainability, 14(20), 13347-13361.

6. Min-Seong Kim, Sean Seungwon Lee*, 2022. Investigation of Geological Conditions beyond the Excavation Face Using a MSP Boring Data Monitoring System, International Journal of Rock Mechanics and Mining Sciences, 157(10), 105161-105171.

7. Yo-Hyun Choi, Min-Seong Kim, Sean Seungwon Lee*, 2022, Prediction of Vertical Alignment of the MSP Borehole Using Artificial Neural Network, KSCE Journal of Civil Engineering, 26(10), 4330-4337.

8. Min-Seong Kim, Sean Seungwon Lee*, 2021, Design of Steel Fibre Reinforced Concrete Shaft Lining for Swelling Ground in Toronto, Applied Sciences, 11(8), 3490-3505.

9. Min-Seong Kim, Sean Seungwon Lee*, 2021, The Efficiency of Large Hole Boring (MSP) Method in the Reduction of Blast-induced Vibration, Applied Sciences, 11(4), 1814-1829.

10. Se-Wook Oh, Gyeong-Jo Min, Se-Woong Park, Min-Seong Kim, Yuzo Obara, Sang-Ho Cho*, 2019, Anisotropic Influence of Fracture Toughness on Loading Rate Dependency for Granitic Rocks, Engineering Fracture Mechanics, 221, 106677-106689.

1. Se-Wook Oh, Jung-Gyu Kim, Dae-Won Lee, Eui-Seob Park, Min-Seong Kim, Byung-Hee Choi, 2025, Experimental Study on Penetration and Damage Behavior of Rock Materials Induced by Linear Shaped Charges, Explosives & Blasting, 43(2), 32-42.

2. Min-Koan Kim*, Min-Seong Kim, 2025, Improving Safety-Management Systems for Reducing Industrial Accidents in Mining Sector, Journal of The Korean Society of Mineral and Energy Resources Engineers, 62(3), 256-265.

3. Dae-Won Lee, Seung-Won Jung, Nam-Sun Hwang, Min-Seong Kim*, 2025,  Numerical Analysis of Vibration Velocity Variation due to Shock Wave Transmission through Bottom-Hole Filling Medium in Blasting, Tunnel & Underground Space, 35(3), 231-246.

4. Seung-Won Jung, Nam-Sun Hwang*, Jin-Hyuk Song, Young-Ho Kim, Nam-Soo Kim, Min-Seong Kim, 2025, Proposal of Blast Vibration Prediction Formula for Domestic Sites Considering Ground Vibration Reduction Characteristics of Electronic Detonators, Explosives & Engineering, 43(1), 33-46.

5. Dae-Won Lee, Jung-Gyu Kim, Sunghyun Lee, Tae Kyun Kim, Han-Eol Kim, Wan-Kyu Yoo, Chang-Yong Kim, Min-Seong Kim*, Numerical Analysis Study on Damage Assessment of Duct Slabs under Vehicle Explosion Scenarios in Tunnel, Journal of Korean Tunnelling and Underground Space Association, 27(2), 101-114.

6. Jung-Gyu Kim, Dae-Won Lee, Jun-Ha Kim, Min-Seong Kim*, 2024, Analyzing the Advancement Efficiency of Cylinder-Cut Techniques in Response to Variations in Drilling Errors, Explosives & Engineering, 42(4), 40-51.

7. Young-Hun Ko, Yeon-Ho Jin, Dong-Hee Lee, Min-Seong Kim, Gunwoong Kim, Jeong-Heum Kim, Nam-Soo Kim*, 2024, Applicability of Pocket-Charge Blasting for Large-Scale Marine Reclamation Projects, Journal of the Korean Geotechnical Society, 40(5), 21-37.

Before CNU (~23.08)

(Article) Min-Seong Kim, 2022, Geological Prediction ahead of the Excavation Face Using a Large-diameter Uncharged Hole Boring Machine and Boring Data Monitoring System, Webzine of Korean Society for Rock Mechanics and Rock Engineering (U-Space), 68, 22-30.

8. Min-Seong Kim, Jinhyeok Jung, Jekyum Lee, Minsun Park, Jeonghyeon Bak, Sean Seungwon Lee*, 2021, Development and Application of Large-diameter Cut-hole Exploration System for Assessment of the Geological Condition beyond NATM Tunnel Face, Tunnel & Underground Space, 31(1), 1-9.

9. Min-Seong Kim, Je-Kyum Lee, Yo-Hyun Choi, Seon-Hong Kim, Keon-Woong Jeong, Ki-Lim Kim, Sean Seungwon Lee*, 2020, A Study on The Optimal Setting of Large Uncharged Hole Boring Machine for Reducing Blast-induced Vibration Using Deep Learning, Explosives & Blasting, 38(4), 16-25.

10. Min-Seong Kim, Hyeong-Min Kang, Sang-Sun Jeong, Yun-Yeong Jeong, Hoon Park, Sang-Ho Cho*, 2015, Determination of Combustion Propagation Velocity of Thermite Reaction Mixture Using Continuous VOD Measurement System, Explosives & Blasting, 33(3), 21-28.