Publications

SCI(E) Journals

[2025]

1. R. Rashi, I. Kapoor, V. Tiwari, S.Y. Lee, S.S. Singh*, and J. Jain*, “Effect of Er Addition on Recrystallization, Texture, and Mechanical Properties in a Binary Mg-Er Alloy”, Materials Science and Engineering A, 939 (2025) 148489

2. M.J. Song, W.C. Kim, D.J. Kim, S.W. Kim, and S.Y. Lee*, “Flow-Accelerated Corrosion in Low-Pressure Evaporator of Heat Recovery Stem Generator: Experiments and Fluid Dynamics Simulation”, Case Studies in Thermal Engineering, 72 (2025) 106263 

3. Y.S. Kim, T. Kang, S.K. Hong, J. Brechtl, M. Lebyodkin, Y.H. Cheng, E.W. Huang, P.K. Liaw, S. Harjo, W. Gong, C.Y. Chiang, and S.Y. Lee*, “Fundamental Mechanisms of Discontinuous Deformation in Metals for Cryogenic-environment applications”, Acta Materialia, 15 (2025) 120970 

4. S. Yuk, S.H. Shim, M. Jeong, D. Lee, K. Lee, S.H. Kim, S.Y. Lee, and J.H. Han*, “Micro/Nanostructure Evolution and Deformation Mechanisms in Friction-Stir-Welded 7075 Al Alloy: A Comparative Analysis of Weld Zones”, Journal of Materials Research and Technology, 36 (2025) 5193-5210 

5. Y.C. Jung, M.J. Song, H.K. Park, M.C. Lee, and S.Y. Lee*, “A Study on Prevention of Fire Proliferation in Building-Type Solar Module”, Fire, 8 (2025) 194 

6. M.J. Song, K.H. Lee, J.S. Lee, H. Kim, W.C. Kim, and S.Y. Lee*, “Evaluation of Crack Formation in Heat Pipe Welded Joints”, Materials, 18 (2025) 2028 

7. M.J. Song, W.C. Kim, and S.Y. Lee*, “The Corrosion Failure Mechanism of a Peak Load Boiler in a District Heating System”, Applied Sciences,15 (2025) 4528

8. G. Choi, H. Chae, Y.S. Kim, S.K. Hong, E. Shin, S.Y. Lee*, “Additive Manufacturing of Si-Added 7075 Aluminum Alloys: Microstructure, Mechanical and Electrochemical Properties via Heat Treatment”, Materials, 18(7) (2025) 1544 

9. H. Wang, S.Y. Lee*, Y.S. Kim, H. Wang*, W. Woo, and Ke An, “Solid Solution Dependence of the Deformation Behavior in Mg-xZn (x=0,1,2 wt%) Alloys: In-Situ Neutron Diffraction and Crystal Plasticity Modeling”, Journal of Magnesium and Alloys, 13 (2025) 823-838  

10. H. Chae, Y.S. Kim, T. Lee, W. Woo, K. An, H. Choo, and S.Y. Lee*, “Quasi-Reversibility of TWIP and TRIP of Fe-17Mn Steel during Low Cycle Fatigue”, Materials Science and Engineering A, 924 (2025) 147793 

11. T.D. Nguyen, C. Singh, T. Lee, K.H. Lee, D.H. Lee, and S.Y. Lee*, “Hydrogen-Driven Ultra-Cryogenic Deformation and Embrittlement in Ti6Al4V Alloy at 15 K”, Materials Science and Engineering A, 923 (2025) 147710 

12. J.Y. Jung, H. Jung, Y.H. An, S.Y. Lee, Y. Zhao, K.B. Lau, P. Wang, and D.H. Lee*, “Deciphering the Role of Solidification Cell Structure in the Hydrogen Embrittlement of CoCrFeNi Medium-Entropy Alloy Fabricated by Laser-Powder Bed Fusion: Insights from Annealing Treatments”, Corrosion Science, 243 (2025) 112595 

13. R. Rashi, S.Y. Lee, S. Singh, Y.L. Chiu, I.P. Jones, and J. Jain*, “Friction and Wear Maps of Mg-Er Alloys with varying Er Content”, Tribology International, 202 (2025) 110337 

[2024]

14. T. Lee, C. Singh, Y.S. Kim, D.H. Lee, J.H. Han, J.Y. Kang, and S.Y. Lee*, “Rate-Dependent Serration Behavior of Twinning-Induced Plasticity Steel at Ultra-Low Temperature”, Journal of Materials Research and Technology, 33 (2024) 2580-2592

15. M.J. Song, H.E. Yoon, G. Choi, Y.C. Jung*, and S.Y. Lee*, “A Study on the Microstructure and Power Generation Performance of Colored BIPV Modules”, Renewable Energy, 237 (2024) 121558

16. H.E. Yoon, M.J. Song, Y.C. Jung*, and S.Y. Lee*, “Research on the Virtual Design and Implementation of Colored Glass for BIPV”, Energy & Buildings, 320 (2024) 114590 383

17. M. Jeong, S. Jo. D. Lee, S. Yuk, T. Lee, S.Y. Lee, S.H. Kim, and J.H. Han*, “Effects of Hot Rolling Process Conditions on Microstructure and Mechanical Properties of Hot-rolled Al-Zn-Mg-Cu-Sc-Zr Alloys”, Korean Journal of Metals and Materials, 62 (2024) 661-671

18. T.D. Nguyen, C. Singh, Y.S. Kim, J.H. Han, D.H. Lee, K. Lee, S. Harjo, and S.Y. Lee*, “Mechanical Properties of Base Metal and Heat-Affected Zone in Friction-Stir-Welded AA6061-T6 at Ultra-Low Temperature of 20 K”, Journal of Materials Research and Technology, 31 (2024) 1547-1556

19. H. Chae, M. Song, and S.Y. Lee*, “Failure Analysis of High-Density Polyethylene Pipe in Heat-Transport Infrastructure of District Heating System”, Polymer(Korea), 48(4) (2024) 376-383

20. Y.S. Kim, M.Y. Luo, D. Yu, K. An, Y. Chen, I.H. Oh, E. Shin, W. Woo, H. Chae, Y.S. Na, P.K. Liaw, J. Jain, J.H. Han, E.W. Huang*, and S.Y. Lee*, “Enhancing the Fatigue Resistance of High and Medium Entropy Alloys by Manufacturing-Driven Microstructural Developments”, Additive Manufacturing, 91 (2024) 104332

21. C. Singh, T. Lee, K.H. Lee, Y.S. Kim, E.W. Huang, J. Jain, P.K. Liaw, and S.Y. Lee*, “Exceptional Fatigue-resistant Austenitic Stainless Steel for Cryogenic Applications”, Applied Materials Today, 38 (2024) 102195

22. H. Vashishtha, D. Kumar, Y.S. Kim, S.Y. Lee*, E.W. Huang, and J. Jain*, “Role of Microstructural Heterogeneity on Nanoscale Mechanical Properties and Wear Responses of Additively Manufactured CoCrNi Medium Entropy Alloy and 316L Stainless Steel”, Journal of Materials Engineering and Performance, 33 (2024) 5717-5726

23. U.M. Chaudry, H.M.R. Tariq, N. Ansari, S.Y. Lee, and T.S. Jun*, “Room and Cryogenic Deformation Behavior of AZ61 and AZ61-xCaO (x=0.5, 1 wt.%) Alloy”, Journal of Magnesium and Alloys, 12 (2024) 1996-2009

24. Y.S. Kim, H. Chae, D.H. Lee, J.H. Han, S.K. Hong, Y.S. Na, S. Harjo, T. Kawasaki, W. Woo*, and S.Y. Lee*, “In-Situ Neutron Diffraction Study of Serration-Involved Cryogenic Deformation Behavior at 15 K”, Materials Science and Engineering A, 899 (2024) 146453

25. H. Chae, E.W. Huang*, J. Jain, D.H. Lee, S. Harjo, T. Kawasaki, and S.Y. Lee*, “Mechanical Stability of Retained Austenite and Texture Development in Additively Manufactured Stainless Steel”, Metals and Materials International, 30 (2024) 1321-1330

26. J.Y. Bang, D.H. Lee, and S.Y. Lee*, “Effect of Grain Size on High Temperature Oxidation Behavior of IN792 Superalloy”, Korean Journal of Metals and Materials, 62 (2024) 267-274

27. T.D. Nguyen, C. Singh, D.H. Lee, Y.S. Kim, T. Lee, and S.Y. Lee*, “Deciphering Hydrogen Embrittlement Mechanisms in Ti6Al4V Alloy: Role of Solute Hydrogen and Hydride Phase”, Materials, 17(5) (2024) 1178

28. Y.H. An, J.Y. Jung, H. Jung, Y.S. Kim, S.Y. Lee, and D.H. Lee*, “Effect of Stress Level on Hydrogen-Induced Nanohardness Variations in CoCrNi Medium-Entropy Alloy”, Materials Characterization, 209 (2024) 113775

29. T.D. Nguyen, N. Ansari, K.H. Lee, D.H. Lee, J.H. Han, and S.Y. Lee*, “Effect of Strain Rate on Hydrogen Embrittlement of Ti6Al4V Alloy”, Materials, 17(5) (2024) 1100

30. U.M. Chaudry, H.M.R. Tariq, N. Ansari, C.S. Kim, S.Y. Lee, and T.S. Jun*, “Exceptional Improvement in the Yield Strength of AZ61 Magnesium Alloy via Cryo-Stretching and Its Implications on the Grain Growth during Annealing”, Journal of Alloys and Compounds, 970 (2024) 172630

[2023]

31. H. Chae, S. Lim, T. Lee, E. Shin, J.W. Suh, S.H. Kang, and S.Y. Lee*, “Optimization of Aging Temperature and Heat-Treatment Pathways in Additively Manufactured 17-4PH Stainless Steel”, Materials, 16(24) (2023) 7557

32. H. Vashishtha, D. Kumar, Y.S. Kim, S.Y. Lee*, E.W. Huang, and J. Jain*, “Effects of Hot Isostatic Processing and Hot Rolling on Direct Energy Deposited CoCrNi Medium Entropy Alloy-Microstructural Heterogeneity, Wear Behaviour, and Corrosion Characteristics”, Materials Characterization, 205 (2023) 113304

33. J. Zhang, S.H. Shim, H. Cho, D. Lee, S.Y. Lee, J.P. Ahn, and J.H. Han*, “Bimodal Reinforcement of Graphite Flake and Graphene Nanoplatelet in Cu Matrix Composites: Anisotropy of the Thermo-Mechanical Properties and Failure Mechanisms”, Journal of Materials Research and Technology, 26 (2023) 2539-2559

34. N. Ansari, D.H. Lee, E.W. Huang, J. Jain, and S.Y. Lee*, “Anisotropic Microstructure, Nanomechanical and Corrosion Behavior of Direct Energy Deposited Ti-13Nb-13Zr Biomedical Alloy”, Journal of Materials Research and Technology, 26 (2023) 2682-2694

35. D.H. Lee*, Y.H. Ahn, Y. Zhao*, J.H. Lee, H.Y. Kim, Y.S. Kim, and S.Y. Lee, “A Novel Methodology to Estimate Hydrogen Diffusivity and Its Applications in Revealing Hydrogen Effects in CoCrNi Medium-Entropy Alloy versus 316L Stainless Steel”, International Journal of Plasticity, 169 (2023) 103737

36. W. Chae, M. Jeong, D. Lee, J. Lee, D.W. Chun, S.Y. Lee, S.K. Hong, S.H. Kim, and J.H. Han*, “Effects of Pre/Post-Aging Treatment on the Mechanical Properties and Texture of Asymmetrically Rolled 6061 Aluminum Alloy: Formability and Planar Anisotropy”, Journal of Materials Research and Technology, 24 (2023) 9476-9490 

37. N. Ansari, S.Y. Lee, S.S. Singh, and J. Jain*, “Effect of Rolling Routes on the Microstructure, Texture and Mechanical Properties of Mg-5Y Binary Alloy”, Philosophical Magazine, 103 (2023) 840-859 

38. D.H. Lee*, J.Y. Jeong, K.H. Lee, S.Y. Lee, Y. Zhao*, K.B. Lau, P. Wang, U. Rammamurty, “Distinct Effect of In-Situ and Ex-situ Hydrogen Charging Methods on the Mechanical Behavior of CoCrFeNi High-Entropy Alloy Fabricated by Laser-Powder Bed Fusion, Journal of Alloys and Compounds, 940 (2023) 168858

39. W. Woo*, Y.S. Kim, H.B. Chae, S.Y. Lee, J.S. Jeong, C.M. Lee, J.W. Won, Y.S. Na, T. Kawasaki, S. Harjo, and K. An, “Competitive Strengthening between Dislocation Slip and Twinning in Cast-Wrought and Additively Manufactured CrCoNi Medium Entropy Alloys”, Acta Materialia, 246 (2023) 118699

40. T.N. Lam, H.H. Chin, X. Zhang, R. Feng, H. Wang, C.Y. Chiang, S.Y. Lee*, T. Kawasaki, S. Harjo, P.K. Liaw, A.C. Yeh, T.F. Chung, and E.W. Huang*, “Tensile Overload-Induced Texture Effects on the Fatigue Resistance of a CoCrFeMnNi High-Entropy Alloy”, Acta Materialia, 245 (2023) 118585

41. A. Shin, B.K. Kim, M. Kim, M. Jeong, D. Lee, H. Ha, S.Y. Lee, C. Kim, S. Park, H.Y. Kim, C.Y. Nam*, and J. H. Han*, “Microstructural and Physicochemical Origins of Electroless Copper Deposition on Graphite Enhanced by Acid Pretreatment”, Materials Chemistry and Physics, 295 (2023) 127128

[2022]

42. T.N. Lam, A. Lee, Y.R. Chiu, H.F. Kuo, T. Kawasaki, S. Harjo, J. Jain, S.Y. Lee*, and E.W. Huang*, “Estimating Fine Melt Pool, Coarse Melt Pool, and Heat Affected Zone Effects on the Strengths of Additive Manufactured AlSi10Mg Alloys”, Materials Science and Engineering A, 856 (2022) 143961

43.  D. Yun, H. Chae, T. Lee, D.H. Lee, H.J. Ryu*, R. Banerjee*, S. Harjo, T. Kawasaki, and S.Y. Lee*, “Stress Contribution of B2 Phase in Al0.7CoCrFeNi Eutectic High Entropy Alloy”, Journal of Alloys and Compounds, 918 (2022) 165673

44. T. Lee, H. Chae, S. Shin, S. Cho, S.K. Lee, S.Y. Lee, K. An, and H.J Ryu*, “Overcoming Brittleness of High Volume Fraction Al/SiCp Composites by Controlling Interface Characteristics”, Materials and Design, 222 (2022) 111038

45. Y.S. Kim, D. Yun, J.H. Han, M.R.U. Ahsan, E.W. Huang, J. Jain, C. Ji, D.B. Kim*, and S.Y. Lee*, “Bimetallic Additively Manufactured Structure (BAMS) of Inconel 625 and Austenitic Stainless Steel: Effect of heat-treatment on Microstructure and Mechanical Properties”, International Journal of Advanced Manufacturing Technology, 121 (2022) 7539-7549

46. Y.S. Kim, W.C. Kim, J. Jain, E.W. Huang*, and S.Y. Lee*, “Hydrogen Embrittlement of a Boiler Water Wall Tube in a District Heating System”, Metals,12 (2022) 1276

47. H. Chae, S. Seo, Y.C. Jung, E.W. Huang, J. Jain, J.H. Han, and S.Y. Lee*, “Evaluation of Supercritical Carbon Dioxide Corrosion by High Temperature Oxidation Experiments and Machine Learning Models”, Metallurgical and Materials Transaction A, 53 (2022) 2614-2626

48. S. W. Chen*, E.W. Huang*, S.M. Chiu, M. Reid, C.Y. Wu, A.M. Paradowska, T.N. Lam*, Y.H. Wu, S.Y. Lee, S.C. Lu, S.A. Chen, Y.G. Lin, and S.C. Weng, “Diffraction-Based Residual Stress Mapping of a Stress Frame of Gray Iron via Vibratory Stress Relief Method”, Frontiers in Materials, 9 (2022) 859342

49. M.Y. Luo, T.N. Lam, P.T. Wang, N.T. Tsou, Y.J. Chang, R. Feng, T. Kawasaki, S. Harjo, P.K. Liaw, A.C. Yeh, S.Y. Lee*, J. Jain*, and E.W. Huang*, “Grain-Size-Dependent Microstructure Effects on Cyclic Deformation Mechanisms in CoCrFeMnNi High-entropy-alloys”, Scripta Materialia, 210 (2022) 114459

50. Y.S. Kim, H. Chae, E.W. Huang, J. Jain, S. Harjo, T. Kawasaki, S.I. Hong*, and S.Y. Lee*, “Microstructural Evolution and Mechanical Properties of Non-Equiatomic (CoNi)74.66Cr17Fe8C0.34 High-Entropy Alloy”, Materials, 15 (2022) 1312

51. H. Chae, M.Y. Luo, E.W. Huang*, E. Shin, C. Do, S.-K. Hong, W. Woo, and S.Y. Lee*, “Unearthing Principal Strengthening Factors Tuning the Additive Manufactured Stainless Steel”, Materials characterization, 184 (2022) 111645

52. A. Prasad, S.Y. Lee, S.S. Singh, N.N. Gosvami*, and J. Jain*, “Texture Weakening and Enhanced Recrystallization Kinetics in a La Containing Mg-Dy Alloy”, Materials Chemistry and Physics, 277 (2022) 125537

53. T.N. Lam*, M.Y. Luo, T. Kawasaki, S. Harjo, J. Jain, S.Y. Lee, A.C. Yeh, E.W. Huang*, “Tensile Response of As-Cast CoCrFeNi and CoCrFeMnNi High-Entropy Alloys”, Crystals, 12 (2022) 157

54. T.N. Lam, Y.H. Wu, C.J. Liu, H. Chae, S.Y. Lee*, J. Jain*, K. An, and E.W. Huang*, “Transient Phase-Driven Cyclic Deformation in Additively Manufactured 15-5 PH Steel”, Materials, 15 (2022) 777

55. D.H. Lee*, Y. Zhao, S.Y. Lee, D. Ponge, and E.A. Jagle, “Hydrogen-Assisted Failure in Inconel 718 Fabricated by Laser Powder Bed Fusion: The Role of Solidification Substructure in the Embrittlement” Scripta Materialia, 207 (2022) 114308

[2021]

56. N. Ansari, S.Y. Lee, S.S. Singh, and J. Jain*, “Influence of Yttrium Induced Twinning on Recrystallization Behavior of Magnesium Alloys”, Journal of Materials Science, 56 (2021) 18258-18271

57. Y.S. Kim, H. Chae, W. Woo*, D.K. Kim, D.H. Lee, S. Harjo, T. Kawasaki, and S.Y. Lee* “Multiple Deformation Scheme in Direct Energy Deposited CoCrNi Medium Entropy Alloy at 210K”, Materials Science and Engineering A, 828 (2021) 142059

58. S.H. Chung, B. Lee, S.Y. Lee, C. Do, and H.J. Ryu*, “The Effects of Y Pre-Alloying on the In-Situ Dispersoids of ODS CoCrFeMnNi High-Entropy Alloy”, Journal of Materials Science & Technology, 85 (2021) 62-75

59. H. Lee, H. Chae, Y.S. Kim, M.J. Song, S. Lim, K. Prasad, H. Krishnaswamy*, J. J ain*, K. An, and S.Y. Lee*, “Viscoplastic Lattice Strain during Repeated Relaxation of Age-Hardened Al Alloy”, Mechanics of Materials, 158 (2021) 103899

60. C.C. Huang, T.N. Lam, L. Amalia, K.H. Chen, K.Y. Yang, M.R. Muslih, S.S. Singgh, P.I. Tsai, Y.T. Lee, J. Jain*, S.Y. Lee*, H.J. Lai, W.C. Huang, S.Y. Chen, and E.W. Huang*, “Tailoring Grain Sizes of the Biodegradable Iron-Based Alloys by Pre-Additive Manufacturing Microalloying”, Scientific Reports, 11 (2021) 9610

61. T.N, Lam, C.Y. Ma, P.H. Hsiao, W.C. Ko, Y.J. Huang, S.Y. Lee, J. Jain, and E.W. Huang*, “Tunable Mechanical and Electrical Properties of Coaxial Electrospun Composite Nanofibers of P(VDF-TrFE) and P(VDF-TrFE-CTFE), International Journal of Molecular Sciences, 22 (2021) 4639

62. H. Chae, E.W. Huang*, J. Jain, S.H. Kang, W. Woo, K. An, and S.Y. Lee*, “Unravelling Thermal History during Additive Manufacturing of Martensitic Stainless Steel”, Journal of Alloys and Compounds, 857 (2021) 157555

[2020]

63. T.N. Lam, S.Y. Lee*, N.T. Tsou, H.S. Chou, B.H. Lai, Y.J. Chang, R. Feng, T. Kawasaki, S. Harjo, P.K. Liaw, A.C. Yeh, M.J. Li, R.F. Cai, S.C. Lo, and E.W. Huang*, “Enhancement of Fatigue Resistance by Overload-Induced Deformation Twinning in a CoCrFeMnNi High Entropy Alloy”, Acta Materialia, 201 (2020) 412-42

64. A. Prasad, S. Si, U.R. Ghori, G. Thirunavukkarasu, Y.L. Chiu, I.P. Jones, S.Y. Lee, S.S. Singh, N.N. Gosvami*, and J. Jain*, “Effect of La Addition on Precipitation Hardening in Mg-10Dy Alloy”, Materialia, 14 (2020) 100898

65. D. Yoon, H. Chae, H. Kim, J.G. Kim, W.C. Kim, T.B. Ha, J. Jang, J.C. Jeong, and S.Y. Lee*, “Integrity Assessment of Obsolete Thermal Storage Tank in District Heating System”, Korean Journal of Metals and Materials, 58 (2020) 693-702

66. T.N. Lam, S.C. Wu, H. Chae, S.W. Chen, J. Jain, S.Y. Lee, K. An, S.C. Vogel, S.M. Chiu, D. Yu, and E.W. Huang*, “Phase Stress Partition in Gray Cast Iron Using In Situ Neutron Diffraction Measurements”, Metallurgical and Materials Transaction A, 51A (2020) 5029-5035

67. Y.S. Kim, H.J. Cho, W.Y. Kim, Y.C. Jung, and S.Y. Lee*, “Development of a Multi-Functional Acrylic Urethane Coating with High Hardness and Low Surface Energy”, Progress in Organic Coatings, 147 (2020) 105748

68. J.R. Lee, M.S. Lee, H. Chae, S.Y. Lee, T. Na, W.S. Kim, and T.S. Jun*, “Effects of Building Direction and Heat Treatment on the Local Mechanical Properties of Direct Metal Laser Sintered 15-5 PH Stainless Steel”, Materials Characterization, 167 (2020) 110468

69. N. Ansari, R. Sarvesha, S.Y. Lee, S. S. Singh, and J. Jain*, “Influence of Yittrium Addition on Recrystallization, Texture and Mechanical Properties of Binary Mg-Y Alloys”, Materials Science and Engineering A, 793 (2020) 139856

70. H. Chae, H. Wang, M. Hong, W.C. Kim, J.G. Kim, H. Kim, and S.Y. Lee*, “Stress Corrosion Cracking of a Copper Pipe in a Heating Water Supply System”, Metals and Materials International, 26 (2020) 989-997

71. H. Lee, Y.S. Kim, H.J. Cho, S. Oh, J. Shim, Y. Nam, S.H. Sohn, Y.C. Jung, S.C. Han, and S.Y. Lee*, “Evaluation of Icephobic and Dissipation Performance on Coating Materials for Preventing Overhead Transmission Line from Ice/Snow Damages”, Polymer (Korea), 44 (2020) 342-348

72. H. Wang, D.K. Kim*, W. Woo, S.H. Choi, S.Y. Lee, and S.K. Hwang, “A New Contour Method for Rapid Evaluation of the Cross-Sectional Residual Stress Distribution in Complex Geometries Using a 3D Scanner”, Journal of Mechanical Science and Technology, 34 (2020) 1989-1996

73. E.W. Huang*, G.Y. Hung, S.Y. Lee, J. Jain, K.P. Chang, J.J. Chou, W.C. Yang, and P.K. Liaw, “Mechanical and Magnetic Properties of the High-Entropy Alloys for Combinatorial Approaches”, Crystals, 10, (2020) 200

74. A. Gokhale, T. Meena, S.Y. Lee, E.W. Huang, N.N. Gosvami, S.K. Sinha, and J. Jain*, “Nanowear Mechanisms of Mg Alloyed with Al and Y at Elevated Temperatures”, Tribology Letters, 68 (2020) 46

75. Y. Kim, W. Choi, H. Choo, K. An, H.S. Choi, and S.Y. Lee*, “In-Situ Neutron Diffraction Study of Phase Transformation of High Mn Steel with Different Carbon Content”, Crystals, 10(2), (2020) 101

76. H. Wang, S.Y. Lee*, E-W. Huang, J. Jain, D. Li, Y. Peng, H.S. Choi, and P. Wu, “Crystal Plasticity Modeling and Neutron Diffraction Measurements of a Magnesium AZ31B Plate: Effects of Plastic Anisotropy and Surrounding Grains”, Journal of the Mechanics and Physics of Solids, 135 (2020) 103795

77. H. Wang, S.Y. Lee*, H. Wang, W. Woo, E.W. Huang, J. Jain, and K. An, “On Plastic Anisotropy and Deformation History-Driven Anelasticity of an Extruded Magnesium Alloy”, Scripta Materialia, 176 (2020) 36-41

78. W. Woo*, J. Jeong, D.K. Kim, C.M. Lee, S.H. Choi, J.Y. Suh, S.Y. Lee, S. Harjo, and T. Kawasaki, “Stacking Fault Energy Analyses in Additive Manufactured Stainless Steel 316L and CrCoNi Medium Entropy Alloy Using In Situ Neutron Diffraction”, Scientific Reports, 10 (2020) 1350

79. A. Gokhale, J. Jain*, R. Prasad, E-W. Huang, and S.Y. Lee, “Characterization of Deformation and Wear Mechanisms during Indentation Scratching on Pure Zinc”, Journal of Tribology-Transactions of the ASME, 142 (2020) 01170

[2019]

80. W. Choi, M. Song, N.H. Lim, and S.Y. Lee*, “Microstructure and Mechanical Properties of Continuous Welded KR50 Rail”, Korean Journal of Metals and Materials, 57 (2019) 755-763

81. H.J. Cho, Y.S. Kim, H. Lee, S.H. Sohn, Y.C. Jung, S.C. Han, and S.Y. Lee*, A Study on Fabrication and Property of Icephobic Materials Using Hydrophobic Fumed Silica”, Polymer (Korea), 43 (2019) 946-951

82. H. Wang, W. Woo*, S.Y. Lee, G.B. An, and D.K. Kim*, “Correlation of Localized Residual Stresses with Ductile Fracture Toughness Using In Situ Neutron Diffraction and Finite Element Modelling”, International Journal of Mechanical Sciences, 160 (2019) 332-342

83. M. Hong, H. Chae, W.C. Kim, J.G. Kim, H. Kim, and S.Y. Lee*, “Failure Analysis of a Water Wall Boiler Tube for Power Generation in a District Heating System”, Metals and Materials International, 25 (2019) 1191-1201

84. T.N. Lam, Y.S. Chou, Y.J. Chang, T.R. Suei, A.C. Yeh, S. Harjo, S.Y. Lee*, J. Jain, B.H. Lai, and E.W. Huang*, “Comparing Cyclic Tension-Compression Effects on CoCrFeMnNi High-Entropy Alloy and Ni-based Superalloy”, Crystals, 9 (2019) 420

85. H. Chae, E-W. Huang*, J. Jain, H. Wang, W. Woo, S.W. Chen, S. Harjo, T. Kawasaki, and S.Y. Lee*, “Plastic Anisotropy and Deformation-Induced Phase Transformation of Additive Manufactured Stainless Steel”, Materials Science and Engineering A, 762 (2019) 138065

86. A. Gokhale, R. Sarvesha, E-W. Huang, S.Y. Lee, R. Prasad, S.S. Singh, and J. Jain*, “Quantitative Evaluation of Grain Boundary Sliding and Its Dependence on Orientation and Temperature in Pure Zn”, Materials Letters, 246 (2019) 24-27

87. E-W. Huang*, S.Y. Lee*, J. Jain, Y. Tong, K. An, N.T. Tsou, T.N. Lam, D. Yu, H. Chae, S.W. Chen, and S.M. Chen*, “Hardening Steels by the Generation of Transient Phase Using Additive Manufacturing”, Intermetallics, 109 (2019) 60-67

88. Y.S. Kim, H.J. Cho, Y.C. Jung*, and S.Y. Lee*, “Evaluation of Peeling Property of Polyisoprene-Based Pressure Sensitive Adhesive”, Polymer (Korea), 43 (2019) 1-9

[2018]

89. H. Wang, W. Woo*, D. K. Kim, V. Em, and S.Y. Lee*, “Effect of Chemical Dilution and the Number of Weld Layers on Residual Stresses in a Multi-Pass Low-Transformation-Temperature Weld”, Materials & Design, 160 (2018) 384-394

90. H. Wang, W. Woo*, D. K. Kim, V. Em, I.D. Karpov, G.B. An, and S.Y. Lee*, “Effect of Tailored Martensitic Transformation in a Thick Weld: Residual Stress Mitigation, Heterogeneous Microstructure, and Mechanical Properties”, Materials Characterization, 144 (2018) 345-355

91. E.W. Huang*, C.M. Lin, J. Jain, S.R. Shieh, C.P. Wang, Y.C. Chung, Y.F. Liao, D.Z. Zhang, T. Huang, T.N. Lam, W. Woo, and S.Y. Lee, “Irreversible Phase Transformation in a CoCrFeMnNi High Entropy Alloy under Hydrostatic Compression”, Materials Today Communications, 14 (2018) 10-14

[2017]

92. S.H. Seo, E.W. Huang, W. Woo, and S.Y. Lee*, “Neutron Diffraction Residual Stress Analysis during Fatigue Crack Growth Retardation of Stainless Steel”, International Journal of Fatigue, 104 (2017) 408-415

93. S.H. Seo, G.D. Choi, T.J. Eom, B. Lee, and S.Y. Lee*, “Correlation of Eddy Current Responses between Fatigue Cracks and Electrical-Discharge-Machining Notches”, Metals and Materials International, 23 (2017) 756-763

[2016]

94. K.S. Yang, M.J. Choi, J.S. Choi, J.H. Eom, B.J. Park, S.Y. Lee, and S.G. Yoon*, “Lead-free 0.75(Bi0.5Na0.5)TiO3-0.25SrTiO3 (BNT-ST) epitaxial films grown on Si (001) substrates via pulsed laser deposition”, Sensors and Actuators A: Physical, 243 (2016) 117-122

95. H. Wang*, S.Y. Lee*, M.A. Gharghouri, P.D. Wu, and S.G. Yoon, “Deformation Behavior of Mg-8.5wt.%Al Alloy under Reverse Loading Investigated by In-Situ Neutron Diffraction and Elastic Viscoplastic Self-Consistent Modeling”, Acta Materialia, 107 (2016) 404-414

96. Z. Zhu, M.A. Gharghouri, M. Medraj, S.Y. Lee, and A.D. Pelton*, “Thermodynamic Modelling and In-Situ Neutron Diffraction Investigation of the (Ce+Mg+Zn) System, Journal of Chemical Thermodynamics, 93 (2016) 242-254

[2015]

97. S.Y. Lee*, E-W. Huang, W. Woo, C. Yoon, H. Chae, and S.G. Yoon, “Dynamic Strain Evolution around a Crack Tip under Steady- and Overloaded- Fatigue Conditions”, Metals, 5 (2015) 2109-2118

98. J.H. Park, J.H. Eom, B.J. Park, K.T. Park, S.Y. Lee, K.S. Kim, and S.G. Yoon*, “Thin-Film Multi-Layer Capacitors using Bi2Mg2/3Nb4/3O7(BMNO) Pyrochlore Thin Films via Radio-Frequency Sputtering”, Current Applied Physics, 15 (2015) 1384-1388

99. S.Y. Lee*, H. Wang, and M.A. Gharghouri, “Twinning-Detwinning Behavior during Cyclic Deformation of Magnesium Alloy”, Metals, 5 (2015) 881-890

100. H. Wang*, P.D. Wu, S.Y. Lee, J. Wang, and K.W. Neale, “Numerical Study of the Effects of Shear Deformation and Superimposed Hydrostatic Pressure on the Formability of AZ31B Sheet at Room Temperature”, International Journal of Mechanical Sciences, 92 (2015) 70-79

101. B. Langelier*, A.M. Nasiri, S.Y. Lee, M.A. Gharghouri, and S. Esmaeili, “Improving Microstructure and Ductility in the Mg-Zn Alloy System by Combinational Ce-Ca Microalloying”, Materials Science and Engineering A, 620 (2015) 76-84

[2014]

102. S.Y. Lee*, H. Wang, M.A. Gharghouri, G. Nayyeri, W. Woo, E. Shin, P.D. Wu, W.J. Poole, W. Wu, and K. An, “Deformation Behavior of Solid-Solution-Strengthened Mg-9wt.% Al Alloy: In-Situ Neutron Diffraction and Elastic-Viscoplastic Self-Consistent Modeling”, Acta Materialia, 79 (2014) 139-148

[2013]

103. W. Wu, K. An*, L. Huang, S.Y. Lee, and P.K. Liaw*, “Deformation Dynamics Study of a Wrought Magnesium Alloy by Real-Time In-Situ Neutron Diffraction”, Scripta Materialia, 69 (2013) 358-361

104. S.Y. Lee* and M.A. Gharghouri, “Pseudoelastic Behavior of Magnesium Alloy during Twinning-Dominated Cyclic Deformation”, Materials Science and Engineering A, 572 (2013) 98-102

105. S.Y. Lee*, E-W. Huang, W. Wu, P.K. Liaw, and A.M. Paradowska, “Development of Crystallographic-Orientation-Dependent Internal Strains around a Fatigue-Crack Tip during Overloading and Underloading”, Materials Characterization, 79 (2013) 7-14

106. S. Cheng*, S.Y. Lee, L. Li, C. Lei, J. Almer, X.-L. Wang, T. Ungar, Y. Wang, and P.K. Liaw, “Uncommon Deformation Mechanisms during Fatigue-Crack Propagation in Nanocrystalline Alloys”, Physical Review Letters, 110 (2013) 135501

[2012]

107. W. Wu, S.Y. Lee*, A.M. Paradowska, Y.F. Gao, and P.K. Liaw, “Twinning-Detwinning Behavior during Fatigue-Crack Propagation in a Wrought Magnesium Alloy AZ31B”, Materials Science and Engineering A, 556 (2012) 278-286

108. E-W. Huang, S.Y. Lee*, W. Woo, and K.-W. Lee, “Three-Orthogonal-Direction Stress Mapping around a Fatigue-Crack Tip Using Neutron Diffraction”, Metallurgical and Materials Transactions A, 43A (2012) 2785-2791

[~2011]

109. L.L. Zheng, Y.F. Gao*, S.Y. Lee, R.I. Barabash, J.H. Lee, and P.K. Liaw, “Intergranular Strain Evolution near Fatigue Crack Tips in Polycrystalline Metals”, Journal of the Mechanics and Physics of Solids, 59 (2011) 2307-2322

110. S.Y. Lee, P.K. Liaw*, H. Choo, and R.B. Rogge, “A Study on Fatigue Crack Growth Behavior Subjected to a Single Tensile Overload: Part І. Overload-Induced Transient Crack Growth Micromechanism”, Acta Materialia, 59 (2011) 485-494

111. S.Y. Lee, H. Choo, P.K. Liaw*, K. An, and C.R. Hubbard, “A Study on Fatigue Crack Growth Behavior Subjected to a Single Tensile Overload: Part ІІ. Transfer of Stress Concentration and Its Role in Overload-Induced Transient Crack Growth”, Acta Materialia, 59 (2011) 495-502  

112. S.Y. Lee, R.B. Rogge, H. Choo, and P.K. Liaw*, “Neutron Diffraction Measurements of Residual Stresses around a Crack Tip Developed under Variable-Amplitude Fatigue Loadings”, Fatigue & Fracture of Engineering Materials & Structures (Invited paper for special issue on experimental mechanics), 33 (2010) 822-831

113. S.Y. Lee, Y. Sun, K. An, H. Choo, C.R. Hubbard, and P.K. Liaw*, “Evolution of Residual-Strain Distribution through an Overload-Induced Retardation Period during Fatigue-Crack Growth”, Journal of Applied Physics, 107 (2010) 023517

114. S.Y. Lee, Y.L. Lu, P.K. Liaw*, L.J. Chen, S.A. Thompson, J.W. Blust, P.F. Browning, A.K. Bhattacharya, J.M. Aurrecoechea, and D.L. Klarstrom, “Hold-Time Effects on Elevated-Temperature Low-Cycle-Fatigue and Crack-Propagation Behaviors of HAYNES 188® Superalloy”, Journal of Materials Science, 44 (2009) 2945-2956

115. S.Y. Lee, H. Choo*, P.K. Liaw, E.C. Oliver, and A.M. Paradowska, “In Situ Neutron Diffraction Study of Internal Strain Evolution around a Crack Tip under Variable-Amplitude Fatigue-Loading Conditions”, Scripta Materialia, 60 (2009) 866-869

116. S.Y. Lee*, Y.L. Lu, P.K. Liaw, L.J. Chen, S.A. Thompson, J.W. Blust, P.F. Browning, A.K. Bhattacharya, J.M. Aurrecoechea, and D.L. Klarstrom, “Tensile-Hold Low-Cycle-Fatigue Properties of Solid-Solution-Strengthened Superalloys at Elevated Temperatures”, Materials Science and Engineering A, 504 (2009) 64-72 

117. S.Y. Lee*, R.I. Barabash, J.-S. Chung, P.K. Liaw, H. Choo, Y. Sun, C. Fan, L. Li, D.W. Brown, and G.E. Ice, “Neutron and X-ray Microbeam Diffraction Studies around a Fatigue-Crack Tip after Overload”, Metallurgical and Materials Transactions A, 39A (2008) 3164-3169

118. R. Barabash*, Y.F. Gao, Y. Sun, S.Y. Lee, H. Choo, P.K. Liaw, D.W. Brown, and G.E. Ice, “Neutron and X-ray Diffraction Studies and Cohesive Interface Model of the Fatigue Crack Deformation Behavior”, Philosophical Magazine Letters, 88 (2008) 553-565

119. S.Y. Lee, Y.L. Lu, P.K. Liaw*, H. Choo, S.A. Thompson, J.W. Blust, P.F. Browning, A.K. Bhattacharya, J.M. Aurrecoechea, and D.L. Klarstrom, “High-Temperature Tensile-Hold Crack-Growth Behavior of HASTELLOY® X Alloy Compared to HAYNES® 188 and HAYNES® 230® Alloys”, Mechanics of Time-Dependent Materials, 12 (2008) 31-44

Scopus/KCI Journals

1. K.H. Lee, M.J. Song, T.U. Kang, W.C. Kim, H. Kim, and S.Y. Lee*, “Investigation of Pitting Corrosion of Copper Heat-Return Pipe in District Heating”, Corrosion Science and Technology, 23 (2024) 315-323

2. M.J. Song, W.C. Kim, H. Kim, J.G. Kim, and S.Y. Lee*, “Investigating the Cause of Ash Deposition and Equipment Failure in Wood Chip-Fueled Cogeneration Plant”, Corrosion Science and Technology, 22 (2023) 1-6

3. M.J. Song, W.C. Kim, H. Kim, J.G. Kim, and S.Y. Lee*, “Corrosion Failure Analysis for a Biogas Pipe”, Journal of the Korean Society for Heat Treatment, 36 (2023) 153-160

4. M.J. Song, G. Choi, W.C. Kim, and S.Y. Lee*, “Corrosion Protective Method Applicable to Air Vent Connected with Heat Transport Pipe”, Corrosion Science and Technology, 22 (2023) 1-8

5. J. Cho, H. Chae. H. Kim, J.G. Kim, W.C. Kim, and S.Y. Lee*, “Failure Analysis of Stress Reliever in Heat-Transport Pipe of District Heating System”, Corrosion Science and Technology, 21 (2022) 243-249

6. M.J. Song, G. Choi, W.C. Kim, and S.Y. Lee*, “Cause of Corrosion and Evaluation of Material Corrosion Resistance on Underground Heat Transport Facilities Connected to Manhole”, Journal of the Korean Society for Heat Treatment, 35 (2022) 193-202

7. M.J. Song, G. Choi, H. Chae, W.C. Kim, H. Kim, J.G. Kim, and S.Y. Lee*, “Degradation Evaluation of High-Pressure Superheater Tube in Heat Recovery Steam Generator”, Corrosion Science and Technology, 21 (2022) 1-8

8.  H. Chae, W.C. Kim, H. Kim, J.G. Kim, and S.Y. Lee*, “Failure Analysis on Inlet Pipe of Governor Value in Steam Turbine of District Heating System”, Corrosion Science and Technology, 21 (2022) 1-6

9. M.J. Song, G. Choi, H. Chae, W.C. Kim, H. Kim, J.G. Kim, and S.Y. Lee*, “Corrosion Failure Analysis of Flow Plate in Plate Heat Exchanger”, Corrosion Science and Technology, 20 (2021) 204-209

10. H. Chae, W.C. Kim, H. Kim, J.G. Kim, K.M. Kim, and S.Y. Lee*, “Corrosion Failure Analysis of Condensate Pre-Heater in Heat Recovery Stem Generator”, Corrosion Science and Technology, 20 (2021) 69-76

11. J.C. Jeong, W.C. Kim, K.M. Kim, H.K. Sohn, J.G. Kim, S.Y. Lee, and H. Kim*, “Failure Analysis of Welded Type 304 in Cooling Water Pipeline of District Heating System”, Corrosion Science and Technology, 19 (2020) 296-301

12. J. Cho, H. Chae, H. Kim, J.G. Kim, W.C. Kim, J.C. Jeong, and S.Y. Lee*, “Failure Analysis of Air Vent Connected with Heat Supply Pipeline under Manhole”, Corrosion Science and Technology, 19 (2020) 196-202

13. H. Lee, H. Chae, J. Cho, W.C. Kim, J.C. Jeong, H. Kim, J.G. Kim, and S.Y. Lee*, “Corrosion Failure Analysis of Air Vents Installed at Heat Transport Pipe in District Heating System”, Corrosion Science and Technology, 19 (2020) 189-195

14. Y.S. Kim, H. Chae, W.C. Kim, J.C. Jeong, H. Kim, J.G. Kim, and S.Y. Lee*, “Failure Analysis on Localized Corrosion of Heat Transport Pipe in District Heating System”, Corrosion Science and Technology, 19 (2020) 122-130

15. S.Y. Lee* and N.H. Lim, “Microstructure and Mechanical Properties of Rail Steel”, Magazine of the Korean Society of Steel Construction, 32 (2020) 7-11 

16. H.J. Cho, Y.S. Kim, Y.C. Jung, and S.Y. Lee*, “Evaluation of Ice Adhesion Strength on the Oxidation of Transmission Line ACSR Cable”, Korean Journal of Materials Research, 29 (2019) 378-384 

17. Y. Kim, H. Chae, M. Hong, M.J. Song, J. Cho, W.C. Kim, T.B. Ha, and S.Y. Lee*, “Corrosion Failure Analysis of the Convection Part of District Heating Peak Load Boiler”, Corrosion Science and Technology, 18 (2019) 55-60

18. M. Hong, H. Chae, Y. Kim, M.J. Song, J.M. Cho, W. C. Kim, T.B. Ha, and S.Y. Lee*, “Flow-Accelerated Corrosion Analysis for Heat Recovery Steam Generator in District Heating System”, Korean Journal of Materials Research, 29 (2019) 11-15

19. M. Hong, J. Cho, M.J. Song, W.C. Kim, T.B. Ha, and S.Y. Lee*, “Corrosion Behavior of Boiler Tube under Circulation Water Conditions in District Heating System”, Corrosion Science and Technology, 17 (2018) 287-291

20. M.J. Song, W. Choi, N.H. Lim*, D. Kim, W. Woo, and S.Y. Lee*, “Residual Stress Analysis of New Rails Using Contour Method”, Journal of Korea Society for Urban Railway, 6 (2018) 405-411

21. S. Seo, E.W. Huang, W. Woo, and S.Y. Lee*, “Internal Stress/strain Analysis during Fatigue Crack Growth Retardation Using Neutron Diffraction”, Korean Journal of Materials Research, 28 (2018) 398-404

22. W. Choi, H. J. Cho, K.M. Yun, K.H. Min, N.H. Lim, and S.Y. Lee*, “Investigation of Microstructure and Mechanical Properties of KR60 Rail, Korean Journal of Materials Research, 27 (2017) 652-657

23. H. Chae, S. Seo, Y. C. Jung, and S.Y. Lee*, “High-Temperature Corrosion Behavior of 316L Stainless Steel in Carbon Dioxide Environment”, Korean Journal of Materials Research, 27 (2017) 552-556

24. B. Park, K. Yun, S.Y. Lee, D. Son, and N. Lim, “Experimental Study for Analysis of Hysteresis Loop Characteristics of the Rails”, Journal of Korean Society of Hazard Mitigation, 17 (2017) 61-69

25. H. Chae, S. Seo, Y.C. Jung, and S.Y. Lee*, “Evaluation of Corrosion Resistance of Materials for Supercritical Carbon Dioxide Power Plant”, KEPCO Journal, 1(1) (2015) 109-113

26. G.D. Choi, M.H. Lee, E-W. Huang, W. Woo, and S.Y. Lee*, “Fatigue Crack-Tip Stress Mapping Using Neutron Diffraction”, Korean Journal of Materials Research, 25 (2015) 690-693

27. C. Yoon, M.A. Gharghouri, and S.Y. Lee*, “Effect of Strain Path on Lattice Strain Evolution during Monotonic and Cyclic Loading in an Extruded Magnesium Alloy”, Korean Journal of Materials Research, 25 (2015) 221-225

28. S.Y. Lee*, W. Woo, M.A. Gharghouri, C. Yoon, and K. An, “Micromechanical Behavior of Solid-Solution-Strengthened Mg-1wt.%Al Alloy Investigated by In-Situ Neutron Diffraction”, Materials Science Forum, 777 (2014) 130-135 

29. E-W. Huang*, C.K. Chang, W.J. Lee, S.Y. Lee, J. Qiao, and C.H. Chen, “Thermal-Effect Study on a Carbon-Carbon Composite Using Synchrotron X-ray Measurements & Molecular Dynamics Simulation”, Materials Science Forum, 777 (2014) 35-39

30. E-W. Huang*, K.-W. Lee, S.Y. Lee, W. Woo, Y.S. Ding, L.W. Tsay, and C.H. Chen, “Residual Strain Distribution around a Fatigue-Crack Tip Determined by Neutron Diffraction”, Materials Science Forum, 706-709 (2012) 1685-1689

31. S.Y. Lee, Y.L. Lu, P.K. Liaw*, H. Choo, S.A. Thompson, J.W. Blust , P.F. Browning, A.K. Bhattacharya, J.M. Aurrecoechea, and D.L. Klarstrom, “Elevated-Temperature Creep-Fatigue Crack-Growth Behavior of HAYNES®188 Superalloy”, Key Engineering Materials, 345-346 (2007) 287-290

Book Chapters

E-Wen Huang, Soo Yeol Lee, and Chung-Hao Chen, “The Neutron Diffractometers for Fatigue Study of Engineering Metals” in the book of “Neutron Diffraction: Principles, Instrumentation and Applications” published in Nova Science Publishers (ISBN: 978-1-62808-725-3)

E-Wen Huang, Soo Yeol Lee, Huamiao Wang, Jayant Jain, Peter K. Liaw, Wen-Chi Yang, Hsu-Hsuan Chin, Yu-Tsen Yi, and Shag-Yi Tu, “Mechanical Behavior of High-Entropy Alloys Focusing on Tensors: An In Situ Neutron Diffraction Investigation from Room to Elevated Temperature”, In book: Reference Module in Materials Science and Materials Engineering (planned for publication in the Encyclopedia of Materials: Metals and Alloys), (https://doi.org/10.1016/B978-0-12-819726-4.00054-5), Accepted 20200916, In press 11/9/20 online available

Mao-Yuan Luo, Tu-Ngoc Lam, Jo-Chi Tseng, Jayant Jain, Soo Yeol Lee, and E-Wen Huang, “Microstructure Effects on the Fatigue Properties of High Entropy Alloys-Focusing on Grain Sizes Effect & Hierarchical Structure”, In book chapter on Fatigue Properties to High Entropy Materials edited by An-Chou Yeh, Tsai-Fu Chung, Jien-Wei Yeh, R.D.K. Misra, published in Elsevier

Presentations

Dr. Lee has made over 400 presentations (65 invited) at national/international conferences and academic institutions.