How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-02 · 6 min read · Independent comparison
• CLIPSUN Earbuds 4 — biggest strength: you get four identical wired earbuds in one pack, each with a built-in mic, inline volume control and a 3.5 mm plug that fits anything with a standard headphone jack.
• CLIPSUN Earbuds 4 — biggest trade-off: there is no active noise cancellation here — just passive sound isolation from the in-ear seal, so loud environments still leak through.
• AILKIN Samsung Earbuds — biggest strength: active noise cancellation in a wired, in-ear design, so it targets the noise around you rather than just blocking it physically.
• AILKIN Samsung Earbuds — biggest trade-off: it comes as a single pair, so you don't get the spare-and-share flexibility of a multipack.
• Who each pick is for: CLIPSUN Earbuds 4 for households, students and anyone juggling several 3.5 mm devices; AILKIN Samsung Earbuds for one person who wants noise cancellation on a phone, tablet or laptop.
CLIPSUN Earbuds 4 is a four-pack of wired in-ear earbuds. Each pair has a 3.5 mm jack, an inline remote with push-button volume control, and a built-in microphone so you can take calls and switch between music and conversation without pulling your phone out. The dynamic drivers cover a 20 Hz to 20,000 Hz range at 32 ohm impedance, which is the standard, easy-to-drive spec that phones, tablets, laptops and MP3 players are built to handle. There's no battery, no pairing, no app — you plug in and it works.
The part that actually changes how you live with these is the count. Four pairs means you can leave one at your desk, one in your bag, one by the TV and one in the car, and you're never the person hunting for headphones. The oxygen-free copper core in the TPE cable is there to keep the signal clean and distortion low, and the flexible cable stores easily without turning into a knot. The in-ear tips are rounded and the enclosure is TPE, off-white, which keeps them light and comfortable for longer sessions. And because they sit in the ear canal, they do isolate some ambient noise — that's passive sealing, not electronic cancellation.
Who should buy it: anyone with more than one 3.5 mm device, families where several people need a pair, students, commuters who don't want to think about charging, and people who lose earbuds constantly. Who should skip it: if your phone has no headphone jack and you rely on a dongle or Bluetooth, or if you specifically want active noise cancellation for a noisy commute or open office, this isn't the set for that job.
AILKIN Samsung Earbuds is a single pair of wired, in-ear headphones in black with silicone tips and a 3.5 mm jack. The headline feature is active noise cancellation — the electronics actively work against surrounding sound rather than relying only on how well the tip seals. That's a meaningful difference on a plane, on a train, or in a shared workspace where steady background noise is the thing wearing you down. The dynamic driver handles the audio, and controls are push-button on the cable.
The soft silicone tips are the other practical detail. Silicone tends to sit gently in the ear and stay put during longer listening, which matters when you're wearing buds for a full work session or a long flight. The black finish is understated and doesn't show grime the way a light color does. It's aimed at a broad range of listeners — the manufacturer lists it as suitable for everyone — and the 3.5 mm plug means it works with Galaxy phones that still have the jack, iPhones and iPads via the right connection, Android devices, laptops, MP3 and MP4 players, and the Switch.
Who should buy it: one person who wants noise cancellation and a single dependable pair to carry, especially on commutes or flights. Who should skip it: if you need multiple pairs for multiple rooms or multiple people, or if you'd rather avoid the extra complexity of active noise cancellation and just want simple passive buds.
Side-by-Side: Which Should You Choose?
• Best for noise cancellation → AILKIN Samsung Earbuds. Active noise cancellation is the one feature the CLIPSUN set doesn't offer.
• Best for travel and flights → AILKIN Samsung Earbuds. Cancelling steady engine and cabin drone is exactly what ANC is good at.
• Best for never charging anything → CLIPSUN Earbuds 4. Wired, no battery, nothing to top up.
• Best for a quiet-room listener on a budget of hassle → CLIPSUN Earbuds 4. Simple plug-and-play with inline volume control and a mic.
• Best for long listening sessions → AILKIN Samsung Earbuds. Silicone in-ear tips are built for comfort over hours.
• Best for shared households, students and offices → CLIPSUN Earbuds 4. The multipack is the whole point.
• Best for a single, tidy everyday pair → AILKIN Samsung Earbuds. One pair, black, no clutter.
If I had to pick one, I'd buy CLIPSUN Earbuds 4. In my opinion the four-pack is the more useful object for most people: it solves the "where are my headphones" problem, works with every 3.5 mm device I'd plug into, and never needs charging. The trade-off is real — no active noise cancellation — so if a noisy commute is your main use case, I'd recommend AILKIN Samsung Earbuds instead and accept having just one pair. Buy the CLIPSUN set for coverage and value; buy the AILKIN for active noise cancellation.
how to unpair headphones from all devices
Unpairing is a Bluetooth action: open your phone or computer's Bluetooth settings, find the device in the paired list, and choose "Forget" or "Remove" on each device it was paired to. Wired earbuds like both of these have nothing to unpair — with a 3.5 mm jack, "disconnecting" just means pulling the plug.
how to make headphones forget all devices
You do this from the device side, not the headphones: remove the entry from the Bluetooth menu on every phone, tablet and laptop that remembers it. On some Bluetooth models you can also hold the pairing button until the light flashes to reset the memory. Neither CLIPSUN Earbuds 4 nor AILKIN Samsung Earbuds uses Bluetooth, so there's no pairing memory to clear.
how to disconnect headphones from all devices
For Bluetooth headphones, toggle Bluetooth off on each device or select "Disconnect" in the Bluetooth menu. For a wired set, simply unplug the 3.5 mm jack from the port. Both products here are wired, so disconnecting is physical and instant.
how to listen to two devices at once with headphones
Bluetooth multipoint lets one pair of headphones hold connections to two devices at the same time, which is a wireless feature. Wired earbuds can't do that — a single 3.5 mm plug connects to one source. If you want two devices running simultaneously on these, you'd need two pairs, which is where a multipack like CLIPSUN Earbuds 4 comes in handy.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: LilGadgets Connect+ Pro vs ooopusX Op.24, Plugfones Sovereign Duo vs Philips TAT5000: True Wireless, HeyEars Soft Ear Plugs vs Houlyn ANC Sleep Earbuds: In Ear, Astro Gaming A40 vs REEYEAR Mic Replacement Boom