How to Fix Squeaky Car Hinges?

Squeaky car hinges can be really irritating. Many cars, especially those with heavy doors or are very old, may have this problem. It is a common issue that can be fixed easily by simply tightening or replacing the clips and fasteners in the door hinges. However, if the issue is due to a damaged or loose car hinge, you may need to replace the hinge as well as the fasteners. Depending on the car model, such as Renault, Toyota, or Ford, different clips and fasteners will be required to accurately support the weight of the car door to avoid squeaky sounds.

It is advised to ask someone to assist you in replacing the door hinges as doing so by yourself can be dangerous and risk damages to the car door. Also, ensure that your toolkit has all the necessary tools and that you have bought the right clips and fasteners before changing the door hinge fasteners. You should follow the below steps to fix the squeaky car hinges:



  1. First, You will need to loosen all the old hinge fasteners and clips. Make sure that your assistant is supporting the door as you loosen the screws with a screwdriver. Inspect the condition of the screws and the door hinges and take out the ones that have been worn out.


  1. You will need to remove all the screws carefully without damaging the car door. If the hinge needs to be replaced, you will also need to remove the spring behind the hinge.


  1. It is recommended to use a car jack to support the car door when it is almost ready to be separated as the full weight of the car door may be too difficult to handle for the person holding onto the car door.


  1. When all the rivets and clips have been removed, you will need to start reattaching the door back with new clips and fasteners that you have bought. Ensure that the door hinges are tightly secured so there are no more squeaky sounds.


  1. It can be challenging to reattach the door. Thus, ensure that your assistant is firmly holding the door as you attempt to reattach it. In addition, it is best to use the door compressor tool to ensure the door is aligned perfectly.


  1. Once you are done, move the door open and close to check if there are any squeaks. In addition, you should use some car lubrication for the hinges, so they work smoothly.

Make sure to invest in the best quality clips and fasteners for the best results. If you are looking to buy Renault, Toyota, or Ford clips and fasteners, get in touch with our team and explore our extensive selection today!