According to many types of research, electrical accidents account for nearly 4% of all workplace fatalities in Australia. Electrocution is one of the greatest dangers that prevailed on construction sites. These risks can be significantly decreased with the proper education, regular use of test and tagging equipment, safety procedures, and some onsite measures. Below are the four most common risks and tips to decrease the probability of these mishaps.

Beware of Overhead Power Lines

Overhead power lines can be very hazardous. If unfortunately, bodily contact is made with their high voltage lines, greater burns and decapitation can occur. If you want to decrease the risks of working with or near power lines, you should make sure to maintain a minimum distance of 3 meters at all times for yourself and any other electrical appliance. Additionally, you should make sure that safety barriers are installed for the safety of pedestrians and passers-by.

Use of faulty tools and equipment

Damaged tools and electrical equipment can certainly cause fires and decapitation. Before you allow the usage of any electrical equipment, you should conduct a proper check for cracks, cuts, or exposed wires on cables and cords. If you notice any fault, you should instantly get the item removed from the appliance and send it to service on an instant basis to be repaired or replaced. You should never attempt to fix the cable on your own if you are not qualified to do so. Regular services from test and tag Australia professionals are certainly a requirement to identify these faults to make sure all equipment at the worksite is safe to use.

Electrical Grounding Issue

Erroneous grounding is one of the most common electrical violations at a majority of workplaces. You should make sure that you use proper grounding and that all electrical tools are properly connected to an RCD to mitigate any risk of unwanted voltage, decapitation, or fires. You should keep all the test and tag equipment and reports in check.

Wet Working Environments

Wet environments are usually considered the riskiest for electrical items. You should never operate electrical equipment in wet conditions unless properly specified that it is waterproof or water repellent. The presence of water certainly increases the risk of decapitation. If electrical equipment gets wet you should make sure that you arrange the test and tag quote from one of the professionals and the appliance is properly inspected & tested and tagged before use.