Stop placing the candles where they would be directly exposed to daylight or harsh indoor lighting, such as a torch if the candle's flames were also. If they are exposed to intense light, candles can dim for a long time.
For the very first time, the most critical idea is to light the Glenfinnan Flame. Sometimes, let the candle burn on the first fire to the outer edge; if the wax is not allowed to melt from tip to bottom, a hole will be created in the candle center. The wick will go on tunneling and burning that way for the remainder of the Bespoke candle if this is not done. Let the whole top layer become a fragrant lake of liquid wax each time you fire your Glenfinnan Candle, and you can get the best scent possible.
Keep the wick trimmed to about one inch at all times. If the blaze is too high, trim the cord; spill the wax off if it is too short (not into the drain). Keep the wick cut out of the resin, so this will harm the flame. It is not possible to burn Scented candles for more than 3 hours at a time; it is recommended that the candle be extinguished at this time, be left to cool for 2 hours and be trimmed before relighting. It utilizes a candle snuffer to deter wicks from wandering off-center to avoid the splash of wax, failing without destroying the string to extinguish the gentle explosion.
You can also encounter air bubbles between the sides of the glass jar and the wax in your soy candles. Soy wax is more sensitive than other wax types to temperature fluctuations and will also compress, leading to air bubbles. It is not an accident and does not impact the candle flame.
The development of a small carbon ball at its tip is part of a pattern of candle wicks. This produces a little more fire, and the outer side of the flame melts. The ball can also be separated before reusing the Candle, and it usually is better to cut the wick once you have extinguished the candle. At the same time, it is still dry, removing any waste wick deposits from the liquid wax. If the candle is in a draught, the center where the molten resin is closest to one side can shoot off. To solve this, there are two ways. Either turn the candle softly away from the hand it is most relative to, into the center, until it lights up, or use something on the wick that is non-flammable.