Exam Screen With Multiple Choice Single Answer Question Type

1. Question Area: This is the section where the question and answer options will be displayed. Note that some questions may require you to open and additional window for displaying questions.

2. Show Answer: Click this button to view the correct answer for the current question. This option will not be available in exam mode.

3. Reset: Click this button to clear any selected answer.

4. Notes: Click this button to add notes for the current question. A separate window (shown below) will open which will allow candidate to enter, save, delete notes for current question. Notes for question are independent of each other.

5. Previous: Click this button to view the previous question.

6. Next: Click this button to view the next question.

7. Review: Clicking on this Button will load Review screen which is used to review each question to find whether the question is answered correctly or incorrectly

8. End Exam: On clicking this button the Grade screen will be triggered which will display all the details of the candidate such as Exam Name, Candidate Name, Date, Time, Result, Score obtained, Pass Score, Maximum Score and Category Wise Scoring.

9. Bookmark this question: Check (select) this option to add current question to bookmarked question list. Uncheck (deselect) to remove bookmarking.

10. Flash card: Clicking this button will open the flash card which provides explanation provided for the current question. Flashcard window is shown below.

11. Pause Timer: On clicking Pause Timer the timer gets paused until it is Restarted by clicking it again.

12. Time: This shows the time left for the Exam.

13. Full screen mode: This option can be used to view exam window in full screen. When used it will hide the banner on exam screen and windows status bar. To exit full screen click on "full screen" image or press escape button on keyboard.

14. Night Mode: This option can be used to enable and disable the night mode. Exam screen in nightmode is shown below

15.Change Text size: Exam screen supports 3 font sizes which can be selected by clicking desired font size button (small, medium, large)

Certexams.com CCNA Exam Simulator With Network Simulator contains practice tests with 575+ questions along with network simulator. Network Simulator for CCNA™ provides advanced router/switch network simulator functionalities including VLANs, VTP, inter-VLAN communications, RIP v2, BGP, OSPF, and WAN protocol simulation.

Exam simulator features

  1. Multiple choice questions (Single and Multi answer) - most vendors provide this.

  2. Testlets (See snapshot Exam Screen below)

  3. Simlets, and

  4. Router Simulations


CCNA Network Simulator Features:

  • Lab exercises -currently 100+ labs are included with scenario type labs for NAT, OSPF, BGP, EIGRP, Access Lists, and others.

  • Router and switch IOS simulator. For beginners, a simple router/switch device simulator has been provided.

  • Simulate Cisco® IOS routers and Switches, supports 26XX, and 36XX routers, and 19XX, and 29XX switches.

  • 350+ router/switch commands are supported for thorough preparation.

  • Labs for switches including 19xx and 29xx switches included in the Lab Manual provided with the software.

  • Contextual help files that provide step by step instructions on using the simulator have been provided.

  • The demo version is limited to a fewer labs, and up to global configuration mode is supported in demo version.

  • Separate lab manual on both console and GUI labs.

  • Backup and restore Lab configuration

  • Bookmarking individual Labs.

  • Bookmarking all labs under selected section.

  • Saving and reloading half completed labs

  • Resetting individual and all labs to default.

  • Marking not attempted, not completed and completed labs in different color for easy identification.

  • Labs on JSON simulator, wireless simulator.

Check this out for for list of CCNA Network Simulator labs


Other products available include: Juniper Netsim, Comptia A+ Labsim, and CCNA tests.

Net Sim Lab Manual

This is a very important feature! It opens up the lab manual for practice. Within the lab manual, you can see several ready-made labs for exploration. The labs start from very basic configuration so that beginners will get benefited. As you open the Lab Manual, you will see two options. a) Load Lab and b) View Lab. The first option loads that particular lab for exploration using Simulator. View lab will simply take you to that particular lab in the manual. But it doesn't load that particular lab.

Console Network Simulator

Device console is used for entering the commands. Initially the Simulator is loaded with the default network. To load a network configuration designed with network designer, open the exported file by clicking "Open Exported File" button. Once you open an exported file, the network diagram is loaded into the simulator and can be viewed using "Network Diagram" button. By default, first router in the list of devices is selected. You can always change the selected device by going to the network, and selecting a different device.

Then Start the console by giving a "carriage return". To begin with, a user prompt is displayed. You can use appropriate commands to practice as given in the supported commands

GUI Network Simulator