Publications
Journal articles
2023
Sidde, S.K., Cheung, W.M., Leung , P.S., 2023, "Comparing non-biodegradable plastic with environmentally friendly natural fibre composite on car front bumpers design", Clean Technologies and Environmental Policy, https://doi.org/10.1007/s10098-023-02661-6
2022
Leung P. S. and Cheung, W. M. , "Implications of geographical locations for hybrid floating solar and floating wind energy," 2022 7th International Conference on Environment Friendly Energies and Applications (EFEA), Bagatelle Moka MU, Mauritius, 2022, pp. 1-7, doi: 10.1109/EFEA56675.2022.10063844.
Cheung, W.M., 2022. A Scenario-based Approach to Predict Energy Demand and Carbon Emission of Electric Vehicles on the Electric Grid. Environmental Science and Pollution Research.
2021
Cheung, W.M., 2021. A Cradle-to-Deposition Life Cycle Assessment of Emerging Photovoltaic Materials. International Journal of Energy, Environment and Economics, 28(2), pp.69-86.
Hafez, H., Kurda, R., Al-Ayish, N., Garcia-Segura, T., Cheung, W.M. and Nagaratnam, B., 2021. A whole life cycle performance-based ECOnomic and ECOlogical assessment framework (ECO2) for concrete sustainability. Journal of Cleaner Production, 292, p.126060.
2020
Raybould, B., Cheung, W.M., Connor, C. and Butcher, R., 2020. An Investigation into UK Government Policy and Legislation to Renewable Energy and Greenhouse Gas Reduction Commitments. Clean Technologies and Environmental Policy.
Hafez, H., Kurda, R., Cheung, W.M. and Nagaratnam, B., 2020. Comparative life cycle assessment between imported and recovered fly ash for blended cement concrete in the UK. Journal of Cleaner Production, 244, p.118722
2019
Hafez, H., Kurda, R., Cheung, W.M. and Nagaratnam, B., 2019. A Systematic Review of the Discrepancies in Life Cycle Assessments of Green Concrete. Applied Sciences. 9, 22, 26 p., 4803.
Yuan, J., Li, L., Wang, E. and Skibniewski, M.J., 2019. Examining sustainability indicators of space management in elderly Facilities—a case study in China. Journal of Cleaner Production, 208, pp.144-159.
Ahmad, T., Basit, A., Anwar, J., Coupiac, O., Kazemtabrizi, B. and Matthews, P.C., 2019. Fast Processing Intelligent Wind Farm Controller for Production Maximisation. Energies, 12(3), p.544.
Ahmad, T., Basit, A., Ahsan, M., Coupiac, O., Girard, N., Kazemtabrizi, B. and Matthews, P.C., 2019. Implementation and Analyses of Yaw Based Coordinated Control of Wind Farms. Energies, 12(7), p.1266.
Huaccho Huatuco, L. and Ball, P.D., 2019. The quest for achieving United Nations sustainability development goals (SDGs) Infrastructure and innovation for responsible production and consumption. RAUSP Management Journal.
2018
Ball, P.D. and Lunt, P.A.V. Enablers for improving production energy efficiency, IEEE Transactions on Engineering Management, accepted for publication 10/09/18. DOI: 10.1109/TEM.2018.2871613 (in press)
Hendry, L., Stevenson, M., MacBryde, J., Ball, P.D. & Sayed, M. & Liu, L. 2018. Local food supply chain resilience to constitutional change: The Brexit effect, International Journal of Operations and Production Management, accepted online 21/08/18, DOI: 10.1108/IJOPM-03-2018-0184. (in press)
Ball, P.D. and Lunt, P.A.V. 2018. Lean eco-efficient innovation in operations through the maintenance organisation, International Journal of Production Economics, accepted online 6/7/18
Ahmad, T., Coupliac, O., Petit, A., Guignard, S., Girard, N., Kazemtabrizi, B. & Matthews, P. (2018). Field Implementation and Trial of Coordinated Control of Wind Farms. IEEE Transactions on Sustainable Energy 9(3): 1169-1176.
Trenkel-Lopez, M. & Matthews, P. C. (2018). Method for Designing a High Capacity Factor Wide Area Virtual Wind Farm. IET Renewable Power Generation 12(3): 351-358.
Schaefer, D. and Cheung, W.M., 2018. Smart Packaging: Opportunities and Challenges. Procedia CIRP, 72, pp.1022-1027.
Fargani, H., Cheung, W.M. and Hasan, R., 2018. Ranking of factors that underlie the drivers of sustainable manufacturing based on their variation in a sample of UK manufacturing plants. International Journal of Manufacturing Technology and Management, 32(3), pp.297-311.
Ozoemena, M., Cheung, W.M. and Hasan, R., 2018. Comparative LCA of technology improvement opportunities for a 1.5-MW wind turbine in the context of an onshore wind farm. Clean Technologies and Environmental Policy, 20(1), pp.173-190.
2017
Wang E (2017). Decomposing core energy factor structure of US commercial buildings through clustering around latent variables with Random Forest on large-scale mixed data. Energy Conversion and Management Energy 153: 346-61.
Wang E, Alp N, Shi J, Wang C, Zhang X, Chen H (2017). Multi-criteria building energy performance benchmarking through variable clustering based compromise TOPSIS with objective entropy weighting. Energy 125: 197-210.
Smith, C.J., Crabtree, C.J. & Matthews, P.C. (2017). Impact of wind conditions on thermal loading of PMSG wind turbine power converters. IET Power Electronics Special Issue: Power Electronics Converters for Marine Renewable Energy Applications 10(11): 1268-1278.
Cheung, W.M., Leong, J.T. and Vichare, P., 2017. Incorporating lean thinking and life cycle assessment to reduce environmental impacts of plastic injection moulded products. Journal of Cleaner Production, 167, pp.759-775.
Anthony, C., Cheung, W.M., (2017), Cost evaluation in design for end-of-life of automotive components, Journal of Remanufacturing, (accepted).
Ozoemena, M., Cheung, W.M., Hasan, R., (2017) Improving uncertainty analysis of embodied energy and embodied carbon in wind turbine design. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768 (In Press)
Davé, A., Ball, P. and Salonitis, K., 2017. Factory Eco-Efficiency Modelling: Data Granularity and Performance Indicators. Procedia Manufacturing, 8, pp.479-486.
Jolly, M.R., Salonitis, K., Charnley, F., Ball, P., Mehrabi, H. and Pagone, E., 2017. Energy efficiency status-quo at UK foundries: the “small-is-beautiful” project. In Light Metals 2017 (pp. 917-923). Springer, Cham.
2016
Simons, P.J. and Cheung, W.M., (2016) Development of a quantitative analysis system for greener and economically sustainable wind farms. Journal of Cleaner Production, 133. pp. 886-898. ISSN 0959-6526
Ozoemena, M., Hasan, R., Cheung, W.M., (2016) Analysis of technology improvement opportunities for a 1.5 MW wind turbine using a hybrid stochastic approach in life cycle assessment. Renewable Energy, 93. pp. 369-382. ISSN 0960-1481.
Tait, M.W. and Cheung, W.M., (2016) A comparative cradle-to-gate life cycle assessment of three concrete mix designs. The International Journal of Life Cycle Assessment, 21 (6). pp. 847-860. ISSN 0948-3349
Gallimore, A. and Cheung, W.M., (2016) Effects of environmental impact based on alternative materials and process selection in automotive components design. Journal of Industrial and Production Engineering, 33 (5). pp. 321-338. ISSN 2168-1015
Davé, A., Salonitis, K., Ball, P.D., Adams, M. and Morgan, D., 2016. Factory eco-efficiency modelling: framework application and analysis. https://dspace.lib.cranfield.ac.uk/handle/1826/10241
Despeisse, M., Davé, A., Litos, L., Roberts, S., Ball, P.D. and Evans, S., 2016. A collection of tools for factory eco-efficiency. https://dspace.lib.cranfield.ac.uk/handle/1826/9865
Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2016) An Empirical Analysis of the Factors That Support the Drivers of Sustainable Manufacturing. Procedia CIRP, 56. pp. 491-495. ISSN 2212-8271
Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Fargani, Haitem (2016) A hybrid Stochastic Approach for Improving Uncertainty Analysis in the Design and Development of a Wind Turbine. Procedia CIRP, 56. pp. 19-24. ISSN 2212-8271
2015
Chen, B., Matthews, P.C. & Tavner, P.J. (2015). Automated on-line fault prognosis for wind turbine pitch systems using supervisory control and data acquisition. IET Renewable Power Generation 9(5): 503-513.
Cheung, W.M. and Pachisia, V., (2015) Facilitating waste paper recycling and repurposing via cost modelling of machine failure, labour availability and waste quantity. Resources, Conservation and Recycling, 101. pp. 34-41. ISSN 0921-3449
Aso, R. and Cheung, WM., (2015) Towards greener horizontal-axis wind turbines: Analysis of carbon emissions, energy and costs at the early design stage. Journal of Cleaner Production, 87. pp. 263-274. ISSN 0959-6526
Cheung, W.M., Marsh, R., Griffin, P., Newnes, LB., Mileham, AR., Lanham, JD., (2015) Towards cleaner production: a roadmap for predicting product end-of-life costs at early design concept. Journal of Cleaner Production, 87 (15). pp. 431-441. ISSN 0959-6526.
Pimenta, H.C. and Ball, P.D., 2015. Analysis of environmental sustainability practices across upstream supply chain management. Procedia Cirp, 26, pp.677-682.
Lunt, P.A.V., Ball, P.D. and Kaladgew, S., 2015. Integrating energy efficiency into industrial strategy–a case study from the European aerospace sector. Procedia CIRP, 26, pp.241-246.
Ball, P.D. 2015, Low energy production impact on lean flow, Journal Manufacturing Technology Management, Vol. 26, No. 3, pp. 412-428. ISSN 1741-038X. http://dx.doi.org/10.1108/JMTM-12-2012-0120.
Yuan C, Wang E, Zhai Q, Yang F (2015). Temporal discounting in life cycle assessment: A critical review and theoretical framework. Environmental Impact Assessment Review 51: 23-31.
2014
Lunt, P., Ball, P. & Levers, A. 2014. Barriers to industrial energy efficiency, International Journal of Energy Sector Management, Vol. 8, No. 3, pp. 380-394. ISSN 1750-6220. http://dx.doi.org/10.1108/IJESM-05-2013-0008. Awarded Emerald “Highly Commended Paper”.
Alabdulkarim, A., Ball, P.D. & Tiwari, A. 2014. Influence of Resources on Maintenance Operations with Different Asset monitoring levels: A Simulation Approach, Business Process Management Journal, Vol. 20, No. 2, pp. 195-212. ISSN 1463-7154.
Wang E, Shen Z and Grosskopf K (2014). Benchmarking energy performance of building envelopes through a selective residual-clustering approach using high dimensional dataset. Energy and Buildings 75: 10-22.
2013
Despeisse, M., Oates, M.R. & Ball, P.D. 2013. Sustainable manufacturing tactics and cross-functional factory modelling, Journal Cleaner Production, Vol. 42, pp. 31-41. DOI: 10.1016/j.jclepro.2012.11.008.
Wallace, K.A. and Cheung, W.M., (2013), “Development of a Compact Excavator Mounted Dust Suppression System”, Journal of Cleaner Production, Vol. 54, Pages 344–352.
Godwin, J.L., Matthews, P.C. & Watson, C. (2013). Classification and Detection of Electrical Control System Faults Through SCADA Data Analysis. Chemical Engineering Transactions 33: 985-990.
Godwin, J.L. & Matthews, P.C. (2013). Classification and Detection of Wind Turbine Pitch Faults Through SCADA Data Analysis. International Journal of Prognostics and Health Management 4: 016.
Chandler, S.R. & Matthews, P.C. (2013). Through-Life Systems Engineering Design & Support with SysML. Procedia CIRP 11: 425-430.
Chen, Bindi, Matthews, P.C. & Tavner, P.J. (2013). Wind turbine pitch faults prognosis using a-priori knowledge-based ANFIS. Expert Systems with Applications 40(17): 6863-6876.
Wang E and Shen Z (2013). A hybrid Data Quality Indicator and statistical method for improving uncertainty analysis in LCA of complex system–application to the whole-building embodied energy analysis. Journal Cleaner Production 43: 166-173.