We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-27 · 6 min read · Independent comparison
If you want one compact organizer that carries your JLab earbuds, the charging cable and a few small extras all in one place, choose CaseSack JLab Go Pop+; if you need a slim silicone skin for a Google Pixel Buds Pro 2 charging case with a clip that keeps it on your bag, choose kwmobile Design Cover.
• CaseSack JLab Go Pop+ — biggest strength: an all-in-one semi-hard organizer with an elastic strap for the earbuds and a mesh lid pocket for the cable and small accessories.
• CaseSack JLab Go Pop+ — biggest trade-off: it's a carrying case only, sized around a handful of JLab models, and the earbuds and cable are sold separately.
• kwmobile Design Cover — biggest strength: a soft silicone cover with a carabiner clip and a charging opening, so you can top up the case without peeling it off.
• kwmobile Design Cover — biggest trade-off: it fits only the Google Pixel Buds Pro 2, and it's a skin, not a storage box — nothing inside it holds a cable.
• Who each pick is for: CaseSack for JLab owners who want everything in one pouch; kwmobile for Pixel Buds Pro 2 owners who want slim, clip-on protection.
This is a case built around a routine rather than a single object. The elastic strap in the base holds the charging case of a JLab Go Pop+, Go Air Pop, Air Tones+, Tones or JBuds Mini, and the mesh pocket in the lid gives you somewhere to put the charging cord and other small accessories. That combination is the whole point: instead of hunting for a loose cable in a bag, everything travels together in one 3.75 x 2.75 x 1.75 inch pouch.
The materials tell you what kind of protection you're getting. It's a semi-hard shell made with PEVA, which the sheet describes as pressure- and hit-absorbing and water resistant, so it shrugs off the knocks and scratches of a purse, shoulder bag or suitcase. At 1.8 ounces it adds almost nothing to what you're already carrying, and the solid purple finish makes it easy to spot at the bottom of a bag. CaseSack backs it with a one-year warranty description.
Who should buy it: anyone who owns one of the listed JLab models and wants home storage and travel carrying handled by a single compact organizer. Who should skip it: anyone with a different brand of earbuds, anyone who wants a cover that stays on the charging case itself, and anyone who expects the earbuds or cable to be included — this listing is the protective case only, and the device and accessories are sold separately.
This one solves a narrower problem, and it solves it neatly. It's a flexible silicone cover made for the Google Pixel Buds Pro 2 charging case, in a ghost white and black finish. Silicone is soft and grippy, which is exactly what you want against scratches, scuffs, dust and the general wear that a case picks up bouncing around in a pocket or bag. At 2.76 x 2.68 x 1.42 inches and 40 grams, it keeps the slim, lightweight feel of the case underneath.
The detail I like most is the charging opening. You leave the cover on and charge the case through the cutout, which means the protection is never sitting on your desk while you top up. The included carabiner clip is the second half of the story — it hooks onto a bag, backpack, belt loop or keys, so your earbuds ride along with you instead of sinking to the bottom of a backpack. The sheet also lists a Halloween theme, so the design leans decorative as much as protective.
Who should buy it: Pixel Buds Pro 2 owners who want everyday protection with a clip and don't want to remove anything to charge. Who should skip it: anyone who doesn't own a Pixel Buds Pro 2 — this cover is made for that case and that case only — and anyone who wants a compartment to carry a cable or extra tips, because there isn't one.
• Best for carrying a cable and extras → CaseSack JLab Go Pop+. The mesh lid pocket is the difference-maker; the kwmobile cover has no storage inside.
• Best for slim, on-case protection → kwmobile Design Cover. Silicone wraps the charging case itself and keeps a low profile.
• Best for travel and commuting → depends on your habit. Clip it to your bag with the kwmobile carabiner, or drop the whole CaseSack pouch in your suitcase and know where everything is.
• Best for charging convenience → kwmobile Design Cover. The charging opening means no removal step at all. With CaseSack, the earbuds come out of the pouch to charge, which is normal for a storage case.
• Best for drop and knock protection → CaseSack JLab Go Pop+. A semi-hard PEVA shell absorbs pressure and hits; a silicone skin guards against scratches and scuffs rather than impacts.
• Best for JLab owners → CaseSack JLab Go Pop+. It's sized for Go Pop+, Go Air Pop, Air Tones+, Tones and JBuds Mini.
• Best for Pixel Buds Pro 2 owners → kwmobile Design Cover. Compatibility is exact, and that's the only model listed.
• Best for a one-piece grab-and-go setup → CaseSack JLab Go Pop+, assuming you want the earbuds and cable living together.
My Verdict
how to charge earbuds case
Put the earbuds back in their charging case, close the lid, and connect the case to a power source with its charging cable. With the kwmobile Design Cover, you can leave the silicone on — it has a practical opening so you can charge without removing the cover. With the CaseSack JLab Go Pop+, lift the earbuds case out of the elastic strap and charge as usual, then tuck it back into the pouch with the cable in the mesh pocket.
how to charge case without earbuds
You can charge the case on its own; the earbuds don't need to be inside for the case itself to take a charge. The practical difference between these two products is access: the kwmobile cover is designed so the charging opening lines up while the cover stays on, while the CaseSack is a storage pouch, so you simply take the JLab case out of the elastic strap before plugging in.
how to charge jlab earbuds case
Drop the JLab earbuds into their charging case, close it, and connect the charging cable. The CaseSack JLab Go Pop+ doesn't change that routine at all — it's a protective organizer with an elastic strap for the case and a mesh pocket for the cord, so the cable is always with you when you need it. Remember the pouch is the case only; the earbuds and cable are sold separately.
how to charge apple earbuds case
Neither of these products is made for Apple earbuds, so I'd skip both if that's what you carry. The CaseSack JLab Go Pop+ is sized for JLab Go Pop+, Go Air Pop, Air Tones+, Tones and JBuds Mini, and the kwmobile Design Cover is compatible only with the Google Pixel Buds Pro 2. The general method is the same — buds in, lid closed, cable connected — but you'd want a case built for your specific model.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Samsung Galaxy Buds2 vs jaddsa Earbuds, QearFun Kids Unicorn Headphones vs ASVOQ USB Headset, Avantree DG59M vs XirocTcy Headset, ABLET Audio Cable Replacement vs Owliwise USB C Kids