CLEAN ENERGY

IN MY CARBON CAPTURE TECHNOLOGY ,I CAPTURE CARBON DIOXIDE FROM AIR AND

THEN DECOMPOSING THE CO2 TO CARBON AND OXYGEN,CARBON WILL BE STORE IN

SOIL STATE

This is my carbon capture technology overview of it contain

1.Air Contactor

2.Potassium hydroxide (carbon capture solution)

3.Pellet reactor

4.Calciner

5.High frequency plasma

6.Slaker

****************************

TREE DIAGRAM

1.Air Contactor & 2.Potassium hydroxide

CO2 + 2KOH —> H2O + K2O3

3.Pellet reactor

K2CO3 + CaOH —> CaCO3 +2KOH

4.Calciner

Caco3 + Heat at 840°C —>Cao+Co2

5.High frequency plasma

Here in this co2 is decomposed into oxygen and carbon

Co2 +heat at 5000°C —> Carbon + Oxygen

6.Slaker is used for recycle cao

Cao (calcium oxide) is reused by water in saker for restart the same process

AIR CONTACTOR

First air is suck in fan to capture carbon dioxide gas from air during that movement carbon capture solution is flow into it ,where stronger

2 KOH Potassium hydroxide (carbon capture ) is bonded with carbon dioxide ,In chemical format co2 is converted into k2co3 .

Air Contactor & Potassium hydroxide

CO2 + 2KOH —> H2O + K2O3

PELLET REACTOR

Here in this process Potassium carbonate which is K2CO3 further react with Calcium hydroxide to form Calcium Carbonate(CaCO3) and Potassium hydroxide which is 2KOH

K2CO3 + CaOH —> CaCO3 +2KOH

CALCINER

In this process caco3 is heat at decomposing temperature which at 840 celsius (the value is taken from internet )

That separate calcium oxide and carbon dioxide ,since co2 is gas format it is collected separately and than it goes to co2 decomposed where carbon is separated from oxygen which collect separate tank

Caco3 + Heat at 840 celsius —>Cao+Co2

HIGH FREQUENCY PLASMA CHAMBER

,In this process co2 is decomposed into solid state carbon and gas oxygen in this process temperature could be changed as per need here the the temperature is around 10,000°C to decomps the co2 faster but in order to decompose it only needs 3726.85°C which will be controlled in it.

Here corona discharge is plasma which temperature is at as per electron volt temperature ,so in short as per frequency it change temperature of plasma inside the chamber ,the energy is taken out from burning of trash

Hence no co2 is produce

FREQUECY AS PER TEMPERATURE

So in order to decompose co2 we need to operated at frequency of in between of infrared to visible

Decompsing co2

Note

1.the temperature is as per electron volt temperature

2.the Plasma is made due of electric field,magnet is used to control the temperature and plasma direction also water is used to cool

3.In this the frequency is ranger at 1015 which come under visible light spectrum as per electromagnet

Here co2 is decompose in carbon and oxygen,carbon solid state and is collect in the form of gas in different

Page updated

Google Sites

Report abuse