Canon G3010 Printer Driver Download
Your Canon G3010 Printer driver needs suitable drivers and software to set up. So, visit the Canon printer support site, i.e., ij.start.cannon and start the process. G3010 Printer driver offers Copy, Scan and Fax features in one model. If you have a newer Canon G3010 Printer driver, get relevant assistance to set it up with the following guide.
Remove outer box seal recently purchased Canon printer model.
Open the box seal and ensure you get a few essentials, i.e., setup CD for windows and mac, cable cords, ink cartridges, and manual.
Now, carefully lift the Canon G3010 printer model from the box and remove the packaging.
Place the printer nearby PC or laptop.
Insert the power cable to the G3010 rear and connect to the wall outlet.
Press the ON button to turn on the Canon printer.
Load white papers in the cassette.
Install colored and black cartridges and follow Canon G3010 wireless setup next.
Step 1
First, press the Information Button on your Printer Panel for 5 seconds
Then the Printer will print its Network Configuration Page.
Then it should be noted that the printout of the Network Configuration Page still does not inform your Printer SSID and Password because the Access Point Mode is still in Disabled state.
You have to change the Access Point Mode to Enable, by pressing the Wifi Direct button until the screen on the Printer Panel shows the Mobile Icon and Number 1.
After that, reprint the Network Configuration Page in the same way, by pressing the Information button on the Printer Panel for 5 seconds.
Finally, the printout of the Network Configuration Page has shown the SSID and Password of your Canon PIXMA G3010 Printer.
Step 2
After you already know the SSID and Password of the Printer from the Network Configuration Page that you have printed earlier.
Then go to your PC / Laptop and go to Wifi PC / Laptop settings and select Network / Wifi Direct Printer that is in accordance with your Printer SSID.
Then enter the appropriate password from the Network Configuration Page and click Next.
Then wait until your PC / Laptop is connected to the Printer via Wifi Direct.
Step 3
To make sure whether your drivers are already installed on your PC / Laptop, click 'Start'> Settings> Devices> Printers & Scanners.
Then on the Printers & Scanners page click Refresh, because in this case there is already an Offline Canon pixma G3010 Series is our previous driver setup that uses Wifi Router Printing.
Then after the process, there is one additional Canon Pixma G3010 series. Then click 'Manage'> Printers Properties on the Canon G3010 series display earlier, then select the "Ports" Tab then you can see which Ports are being actively used, make sure the "Checked" Ports that read WSD with the Canon G3010 series driver.
Then you can proceed to Test Print by selecting the "General" Tab and then clicking Print Test Page.
Finally, if it prints successfully, the PC / Laptop is connected to the Printer via Wifi Direct.
Canon PIXMA G3010 Basic Printing
Load papers in the G3010 printer model.
Open printer driver's setup screen. For it – Go to Control Panel -> Hardware and Sound -> Devices and Printers -> right-click on printer icon -> Printing preferences.
Click on frequently used settings. You can customize the setting here.
Select print quality – Economy, Standard, or High.
Choose the paper source from the bottom and click OK.
Now you can select a document and click Print to start printing.