How to Fix a Black Screen After BIOS Update?

In Windows 10, one of the most irritating issues you can stumble upon is a black screen because you will not view an error code printed on your screen to get a hint on where to begin troubleshooting. A black screen could occur for several reasons. It might be associated with a problem with a current graphics driver update, or it could happen during the installation of a feature update that adds a compatibility issue. It could also arise as a result of a buggy system update. Or it could be a hardware associated problem with the screen, video adapter, or connection. If you want to repair this issue, then here are some points provided below.

Check your External Devices

To check your external devices, follow these on-screen steps given below:

1. Firstly, detach the device through any slot or port.

2. Then unplugged every attached peripherals such as external printers, printers, and USB storage.

3. You should detach the AC adapter through the system.

4. Go to the battery slot and remove the battery.

5. Now, long-press the Power key for a minimum of 15 seconds.

6. After that, place that battery into its slot and connect the AC adapter.

7. Later, reboot the system.

8. Once you have done, you might be taken to a startup menu. Select the ‘Start Windows Normally’ option.

Attempt a Startup Fix with a Windows Installation Media

To attempt a startup fix with Windows Installation Media, follow these on-screen steps given below:

1. At first, make a Windows 10 clean copy over a USB via the Windows Media Creation Tool.

2. Then boot from the freshly made flash drive.

3. You should launch the option of ‘Advanced Startup.’

4. After that, select the ‘Repair your computer’ option.

5. Now, click on the ‘Startup repair’ option and permit the procedure to complete.

Attempt to Fix Boot Records

To attempt to fix boot records, follow these on-screen steps given below:

1. You should start the device and, while the startup procedure, hold the F9/ F11/ F12 continuously.

2. Afterward, click on the Troubleshoot option and then pick Advanced options.

3. Then choose the ‘Command Prompt’ option.

4. Now, the first command to attempt is ‘check disk,’ and hit the Enter button: chkdsk/ r

5. After that, try this command: sfc /scannow

6. In case the problem continues, perform the pursuing commands and hitting the Enter button individually:

7. bootrec /scans

8. bootrec /fixmbr

9. bootrec /fixboot

10. bootrec /rebuildbcd

11. Now, attempt to reboot the device usually after that.

Disable Fast Startup Function

To disable the fast startup function, follow these on-screen steps given below:

1. At first, access the Safe Mode on your system.

2. To invoke the Windows search panel, input ‘power settings’ in it and press the Enter button.

3. You should click on the ‘Power & sleep settings’ option through the menu.

4. After that, select the ‘Additional power settings’ option in the section of Related settings.

5. You will get a ‘Power options’ screen and select the option of ‘Choose what the power button does’ through the left menu.

6. Later, select the ‘Change settings that are currently unavailable’ option.

7. Now, untick the ‘Turn on fast startup (recommended)’ box and then hit the ‘Save Changes’ button to apply the changes.

Utilize the Windows + P Shortcut

To utilize the Windows + P shortcut, follow these on-screen steps given below:

1. First of all, start the system and wait until you see the cursor.

2. Then hold the Spacebar key over the keyboard and input the password.

3. After that, press the Win + P hotkeys simultaneously on the keyboard and down arrow once.

4. Finally, hit the Enter button and keep redoing the instruction until the issue is fixed.

Visit: ij.start.canon

Source: https://ijstart-ca-non.wordtypo.com/how-to-fix-a-black-screen-after-bios-update/