ij.start.cannon setup for Canon Printer

When users purchase a new Canon Pixma printer, the first thing that they look for is the setup instructions. After completing the initial setup process, you will be able to access all the printing features of your Canon PIXMA printer. However, the actual setup process can only be initiated if you have unpacked your printer, connected it through a power cord, and other cords. After turning on your printer, you need to go to ij.start.canon and follow the stepwise instructions that we have mentioned in this post.

Well, when you purchase a new Canon Printer, you need to go to ij.start.canon to install the printer drivers on your Windows or Mac device. On this page, you will some instructions to download and install the printer drivers. All you need to do is follow the prompts that keep prompting on your device and do as said. Now, let us proceed with the steps to install the Canon Printer drivers and then complete the setup process via https://ij.start.canon.

In order to complete the ij.start.cannon for the Pixma printer, you are required to connect it to a power source and then to a wireless network. However, most of us are unaware of the method to connect our printers to the wireless network. Thus, you can follow the quick instructions given below to start the connectivity process. In this method, we shall try to connect your printer through the WPS or wireless button method:

1. Connect your printer to a power source and press the "Power" button

2. Make sure that the light on the printer is stable

3. Now, you need to locate the wireless button on your printer

4. After locating the wireless button, press and hold it

5. As soon as the light starts to blink, you need to release this button

6. On your router, find, and press the WPS Push button

7. Now, the printer will start searching for the network in its range

8. This shall make the power and indictor light blink together

9. Now, wait for the light to stop blinking

10. Finally, connect your printer to the available network

After the connection has been established, you will see that the ij.start.canon process has been completed and you can now print a test page to check if the connection was successful or not.

Proper installation is required to connect your Canon PIXMA Printer to Wi-Fi and we have mentioned the same in the process above. It is quite clear from this section that the method of ij.start.cannon for printer setup is a convenient one and can be completed by following each step carefully. Just make sure that you select the correct network and enter the network passkey carefully to avoid any chances of connection failure..