• You will need to Enable “Wi-Fi” in the “Setting” section on your device in order to receive wireless communications.

• XXXXXX-G3010 series refers to the 6 digits of the address of the printer. It should appear on device’s list.

• Password must be given. You must enter a device and printer name.

How Do I Install My Canon Printer To My Computer?

• Using a USB cable, connect your Canon Printer to your PC.

• Your computer system will prompt you to start.

• Choosing printers at the end of ‘Devices’ will make your choice.

• Your next step will be to click on ‘Add Printer’ and choose ‘Add Local Printer’.

You have to go through three important steps – Prepare your Canon G3010, downloading the software, and installing the software. Make sure your PIXMA G3010 is turned on. Let's get started;

• Press and hold the wireless connect button.

First of all, turn on your Canon G3010 printer, then go to the LCD menu. Next, press the wireless button, release after 3 seconds, and wait for the "Follow Instructions" screen.

• Visit ij.start.canon/G3010.

Enter the "ij.start.canon/G3010" URL address in the search address bar. Here, click Start, and you can watch the video to prepare the printer.

• Download online Canon G3010 setup.

If you already have prepared your G3010, then click on the "If you have already prepared your printer, go to Connect" link. Now, select Windows from the bottom left, then click on the Download button.

• Run the downloaded Setup and click Start Setup.

Click on "win-g600-1_1-n_mcd.exe" to open the file. Then, click on "Start Setup" and next in the following window.

• Select your region and Accept the license agreement.

The software will acquire some information, then choose your country and click Next. Now, read the license agreement terms and click Yes and Agree in the next window.

• Complete the wireless setup installation.

Make sure your G3010 model and router is showing in the Connection Method screen. If it's correct, click Yes, and the wireless connection completes. Click Next to proceed.

• Canon PIXMA G3010 Driver installs. 

Wait for a few minutes to install the driver, click "Start" on the Test print page, and print with the Canon G3010 printer. If you click next, the Setup complete screen will show up.

• Install additional software for complete Setup.

Select the software you require for printer setup. Then, click Next and wait for the software to install once the Canon PIXMA setup is completed and Click Exit.

1. First, make sure your printer and device are turned on.

2. Then enable network/wireless on your printer by pressing the network button on the printer panel.

3. Then wait until the LCD screen on the panel shows the signal bar.

4. Then Install your Canon Pixma G3010 printer driver.

5. During the installation process, a checking the printer status display will appear where the driver that has been installed on the device will check the connection with your printer.

6. Then after that a display will appear that reads "Check the Connection Method". then the display will also show information about the printer name and serial number.

7. then When the printer and device are connected to the same network, an image will appear showing that the device and printer are connected to the network.

8. Then click the YES button.

9. And after that you can continue by doing a test print.

10. Finally, if you print successfully, it means that your device is connected to the printer via a wifi router.