Alphacrypt Classic Firmware Update

Here is a possible title and article with html formatting for the keyword "Alphacrypt classic firmware update":

How to Update Your Alphacrypt Classic Cam with DVB-C

If you have an Alphacrypt Classic Cam, you may want to update its firmware to enjoy the latest features and compatibility with different smartcards. However, updating the cam is not as easy as it sounds, especially if you use DVB-C instead of satellite signal. In this article, we will show you how to update your Alphacrypt Classic Cam with DVB-C using a laptop with a PCMCIA slot and some software tools.

What You Need

Before you start, make sure you have the following items:

An Alphacrypt Classic Cam with firmware version lower than 3.19

A laptop with Windows 2000 or XP and a PCMCIA slot

A smartcard reader (optional)

The Alphacrypt Update 3.19 Classic package from here

The XP PCMCIA patch from here (only if your cam is not recognized by the laptop)

Step 1: Install the Driver

First, you need to install the driver for the Alphacrypt Classic Cam on your laptop. To do this, follow these steps:

Unzip the Alphacrypt Update 3.19 Classic package to a folder on your laptop.

Remove any smartcard from the cam and insert it into the PCMCIA slot of your laptop.

When the Found New Hardware Wizard pops up, choose "Install from a list or specific location" and click Next.

In the next screen, choose "Don't search" option and point to the Win2000XP folder from the update package.

When the cam is found and the driver is installed, you should see it in Device Manager as "Smart Card Reader".

Step 2: Run the Update

Next, you need to run the update program to flash the new firmware to your cam. To do this, follow these steps:

Run the Update314.exe file from the update package.

The program will detect your cam and show its current firmware version.

Click on "Update" button and wait for the process to complete.

When the update is done, you should see a message saying "Update successful".

Remove the cam from your laptop and insert it into your DVB-C receiver.

Troubleshooting

If you encounter any problems during the update process, here are some possible solutions:

If your cam is not recognized by your laptop, you may need to apply the XP PCMCIA patch. To do this, follow these steps:

Unzip the XP PCMCIA patch to a folder on your laptop.

Copy the INF file to C:\Windows\INF (and NOT the SYS file to System32\Drivers as stated in the German manual).

Go to Device Manager and choose "Update driver" on both PCMCIA slots.

Choose "Standard Card Bus Controller" (the INF file you just copied) and point to the folder where you unzipped the patch when asked for the SYS file.

Cold reboot your laptop and insert your cam again.

If you still get an exclamation mark in front of your cam in Device Manager, you may need to disable some other devices that may conflict with its address. To do this, follow these steps:

Disable network controllers, COM ports, LPT ports in Device Manager.

Reboot your laptop and insert your cam again.

If you have trouble updating your smartcard after updating your cam, you may need to change 66dfd1ed39

Rig N Roll Activation Key Keygen Download<br>Blaupunkt Travelpilot Ex Cd Download<br>Answers To The Mona Lisa Molecule By Karobi Moitra<br>