Electric Roller Shutters

How Do You Install Electric Roller Shutters?

Blinds, roller shutters and awnings help you maintain the proper temperature and protect your home from burglary. The additional thermal insulation provided by electric shutters can assist in reducing your heating and energy costs dramatically.

A smooth-running tubular motor is quiet and easy to maintain. It is easily integrated into the most current home automation system.

Anyone looking to install 24 hr roller shutter repair singapore at their house or workplace has two options available:

An electric belt winder

An electric belt winder can open and close your blinds for rollers swiftly and effortlessly. There are models for every type of belt boxes, making retrofitting them simple and fast. There is no need to alter the shaft for the roller shutter or set up an additional supply line, and it is possible to use the belt winder to save space.

A tubular motor

A motor in a tubular form is attached to the shaft of the roller shutter and runs it. The roller shutter is then rolled up. This method offers greater control and also automation than the regular. Radio-powered motors aren't just practical, but they get rid of all those wires. It is possible to control some models remotely if you require to leave in a flash or even from a beach!

7 Steps to Installation of Electric Roller Shutters

1. Attach the motor mount to the motorhead.

2. Move the shaft adapter over the stop ring of the head of the motor. To do this, you need to trace the inner groove of the adapter across the rotor rings.

3. Install the driver onto the motor's journal or internal expansion clamps until they are in contact. The metal plate that you screwed on should face the direction of expansion.

4. Move the motor slowly into the shaft of the roller shutter until the adapter rings stop. Place the adapter and driver to ensure that they will fit perfectly within the groove inside the shaft. It is crucial to stop it from being pushed off by the adapter or the rotor ring to avoid problems later in the installation!

5. Move the shaft's capsule onto the shaft to the other side and then screw in the counter and motor bearing inside the roller shutter box to ensure that the roller shutter shaft is well-balanced. You can then apply pressure to the roller shutter shaft against an axle pin.

6. Then, begin to install the motor. Install the ball bearing into the counter bearing and align the motor using the square motor inside the motor's bearing. Place the ball bearing securely within the shell of the bearing in the counter bearing and press it into place. Install the motor square by using the cotter pin of the motor mount by gently expanding the pin.

7. After installation, it is necessary to set the tubular motor's settings. When calibrating the route and ends, you must do your best to avoid problems in the future. It is recommended that the top and bottom points be separated with a 2 to 3 millimetres gap. Then, connect it to a power source and adjust it to"Roller shutter open" or the "Roller shutter opened" position. Follow the opening process.

Radio-controlled shutters wirelessly permit you to create unique routines for weekly and daily schedules that lower and raise the blinds in a controlled manner. Timers operate the control. Alongside the daily or weekly schedules, some models also provide random programming that guards against fraudulent behaviour and can deter burglars. Additionally, there is vacation programming, twilight and sun sensors, and the automated transition between summertime to winter.

Read More : Why Should Commercial Buildings Install Fire-rated Roller Shutters?