Brass Cut wire shot

Brass Cut wire shot

Brass cut wire shots is manufactured or created by good quality of brass wire cutting wire into equivalent lengths of wire diameter. Brass cut wire shots quality is controlled by chemical and physical properties heritable in the wire and wire lengths or breadths. These wires are very fine finished, corrosion-resistant and highly durable in nature. Brass Cut wire shot applications are included in Shot peening, blast cleaning and vibratory finishing. The Brass Cut wire shot is available as-cut edges rounded by conditioning, or fully modified to spheroids in different customized number of sizes from 0.6 mm to 3.17 mm as of requirement of customer. Its hardness is lies between 36 to 55 HRC. The brass Cut wire shots are long-life durability as compare to others. Brass cut wire shots are mainly used in wheel blasting and sand blasting. It used to remove dust, paint removal shot peening and clean.

Read this -

• shotsblastingmachine.com/plastic-media/

Brass cut wire shots are high durability the diameter if the brass is 0-10 mm and 1cm to 5 cm, thickness 0-5 mm, hardness is 180-205 hv and sizes are 0.30-2.50 mm, 0.40 mm to 2.50 mm manly its used in industrial area and Portable blasting machine, wheel blasting machine. The brass cut wire shots is recycling and reused. It can be used again in sand blasting abrasive while shot peening removal of paint.

Follow on -

Instagram - Airoshot

Linkdein - Airoshots