How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want to upgrade the Beats Studio 2 you already own into a wireless, cable-free headphone with a built-in mic, choose Bolle & Raven Bolle&Raven; if you need to rescue a pair of Beats Studio 2 or Studio 3 cans whose earpads have cracked, flaked or flattened, choose GEEKRIA SNAP Magnetic Ear.
These two products share almost nothing except a target headphone family — Beats Studio. One is an electronics upgrade that cuts the cord. The other is a consumable hardware fix that keeps an existing pair comfortable and wearable. That's the whole comparison in a sentence, and it's why the "which one is better" question has no single answer. It depends entirely on what's wrong with your headphones right now.
• Bolle & Raven Bolle&Raven — biggest strength: it converts a wired Beats Studio 2 into a wireless headphone with its own internal battery, mic and on-board controls for volume and track skipping.
• Bolle & Raven Bolle&Raven — biggest trade-off: compatibility is razor-thin. It is modeled for the Beats Studio 2.0 only and explicitly does not fit the Beats Solo 2, so you must verify your model before ordering.
• GEEKRIA SNAP Magnetic Ear — biggest strength: magnetic mounting means you snap new cushions on in seconds with no wrestling and no glue, and the kit covers Studio 2 (wired and wireless) plus Studio 3.
• GEEKRIA SNAP Magnetic Ear — biggest trade-off: it changes nothing about how your headphones sound or connect. It is a comfort and wear part, not an upgrade.
• Who each pick is for: the Bolle & Raven adapter is for someone with a wired Studio 2 who wants to ditch the cable; the GEEKRIA pads are for someone whose Studio 2 or Studio 3 still works fine but feels tired against the ears.
This is a small grey adapter, roughly 1.5 by 2 by 3 inches, that plugs into the wired Beats Studio 2.0 and turns it into a Bluetooth headphone. That's the entire pitch, and it's a good one if you already like the sound of your Studio 2 but hate the cable snagging on your jacket or your desk chair. Once it's attached, the adapter carries its own battery rated for up to 12 hours of playback and talk time, so a full workday or a long-haul flight is covered without a recharge.
The controls matter more than people expect. Because the adapter has built-in buttons and a microphone, you can adjust volume, skip songs and take a call without reaching for your phone. It works with both Apple and Android devices, so you're not locked into one ecosystem. In the box you get the adapter itself, a charging cable and a user guide, backed by an 18-month guarantee from the brand.
Who should buy it: anyone sitting on a wired Beats Studio 2 who wants wireless freedom, hands-free calls and physical buttons without buying a whole new headphone. Who should skip it: Beats Solo 2 owners, anyone with a Beats model other than the Studio 2.0, and anyone who wants a replacement part rather than an electronic mod. The brand is blunt about this — the adapter is modeled for the Studio 2.0 only — so check the model printed on your headband before you commit. If you're unsure, the honest move is to look up the current price and compatibility notes for your exact model on the product page before ordering.
These are replacement ear cushions, not electronics. They come in pink faux leather with a magnetic base, and the point of the design is speed: you press the cushion onto the magnetic ring and it seats in seconds, no stretching, no adhesive, no fiddling with a plastic lip that never quite tucks in. If you've ever replaced pads on a Beats headphone the traditional way, you know how appealing "seconds" sounds.
The kit is genuinely complete. You get two replacement ear cushions, two magnetic base kits, and a small toolkit to help with installation — four pieces total. Compatibility is broader than the adapter's: these fit the Beats Studio 3 Wireless, Studio 2 Wireless and Studio 2 Wired. Note the wording carefully, because "Studio 2 Wired" appears here while the Bolle & Raven adapter is locked to the Studio 2.0 — the two products are solving problems on overlapping but not identical headphone lists. The pads carry a one-year manufacturer warranty, and the brand states that if you mis-match your headphone type or the pads don't fit, you should contact them.
Side-by-Side: Which Should You Choose?
• Best for cutting the cable → Bolle & Raven Bolle&Raven. It's the only one of the two that adds wireless playback, a mic and on-board controls.
• Best for reviving worn-out headphones → GEEKRIA SNAP Magnetic Ear. Cracked or flattened pads are exactly the problem it solves.
• Best for battery life → Bolle & Raven Bolle&Raven. The adapter's internal battery is rated for up to 12 hours of playback and talk time; the ear pads have no power at all.
• Best for fit compatibility → GEEKRIA SNAP Magnetic Ear. It covers Beats Studio 3 Wireless, Studio 2 Wireless and Studio 2 Wired, while the adapter fits the Beats Studio 2.0 only.
• Best for hands-free calls → Bolle & Raven Bolle&Raven. The built-in mic and controls let you switch between calls and music without touching your phone.
• Best for quick, tool-light installation → GEEKRIA SNAP Magnetic Ear. Magnetic mounting is the entire concept; the pads seat in seconds and the kit includes a fitting toolkit.
• Best for a spare-parts drawer → GEEKRIA SNAP Magnetic Ear. Cushions wear out on a schedule; having a fresh set on hand is practical.
• Best for pure convenience with an older wired pair → Bolle & Raven Bolle&Raven, provided your model is the Studio 2.0.
In my opinion, the right pick comes down to one question: does your headphone still work? If it does and it's a wired Beats Studio 2, I'd buy the Bolle & Raven Bolle&Raven — 12 hours of wireless playback, a mic and real buttons is a meaningful upgrade to gear you already own, and the 18-month guarantee softens the risk. If your pads are the problem, I'd buy the GEEKRIA SNAP Magnetic Ear instead, because no adapter will fix a cushion that's shedding onto your face. Buy the one that matches your actual problem, not the one with the longer spec list.
FAQ
what are the best wired studio headphones
what are wired headphones
Wired headphones connect to your device with a physical cable rather than Bluetooth. The Beats Studio 2 ships as a wired headphone, and the Bolle & Raven adapter exists specifically to convert that wired connection into a wireless one — which tells you the Studio 2's default state is cabled.
what headphones do professional studios use
The data sheets don't cover studio monitoring choices, so I won't invent a list. What's relevant here is that both products are built around the Beats Studio line — a consumer headphone family — not around dedicated studio monitors. If you need reference-grade monitoring, neither of these is the purchase.
are all studio headphones wired
No. "Studio" in a product name is often branding rather than a technical guarantee. The Beats Studio 2 Wired and Studio 2 Wireless are treated as separate models in the GEEKRIA compatibility list, and the Bolle & Raven adapter's whole purpose is to make a wired Studio 2 wireless — proof that the line spans both.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: ZIHNIC Headphones Over-Ear vs ADOOPE Kids Headphones, Fidiso Open Ear Earbuds vs NOUKAJU Status Pro X, Monster Video Capture Card vs Gneinour QC35, Audio Technica ATH-EQ300M vs FIO MOTUS FM30