Official Samsung Galaxy J1 SM-J100H DS Stock Rom
DOWNLOAD https://urllie.com/2xUrP5
How to Install Official Samsung Galaxy J1 SM-J100H DS Stock Rom
If you are looking for a way to restore your Samsung Galaxy J1 SM-J100H DS to its original firmware, then you are in the right place. In this article, we will show you how to download and install the official stock rom for your device using Odin tool. This will help you fix any software issues, such as bootloop, stuck on logo, virus infection, or performance problems. You will also be able to enjoy the latest features and security updates from Samsung.
Before we begin, let's take a look at some of the specifications of the Samsung Galaxy J1 SM-J100H DS. This is a dual-SIM smartphone that was released in February 2015. It has a 4.3-inch display with a resolution of 480x800 pixels. It is powered by a 1.2 GHz quad-core processor and 512 MB of RAM. It has 4 GB of internal storage that can be expanded up to 128 GB with a microSD card. It has a 5 MP rear camera and a 2 MP front camera. It runs on Android 4.4.4 KitKat and has a removable 1850 mAh battery[^2^].
A stock rom is the official firmware that comes pre-installed on your device by the manufacturer. It contains the operating system, drivers, apps, and settings that are optimized for your device. Installing a stock rom can help you restore your device to its factory state, fix any software issues, and unroot your device if you have rooted it before[^3^].
Requirements
A Samsung Galaxy J1 SM-J100H DS with at least 50% battery charge.
A Windows PC and a USB cable.
The official stock rom for your device model. You can download it from here.
The latest version of Odin tool. You can download it from here.
The Samsung USB drivers for your device. You can download them from here.
A backup of your important data, such as contacts, messages, photos, etc.
Steps to Install Official Samsung Galaxy J1 SM-J100H DS Stock Rom
Extract the stock rom zip file on your PC. You should get a file with .tar.md5 extension.
Extract the Odin zip file on your PC. You should get an Odin.exe file and some other files.
Install the Samsung USB drivers on your PC.
Turn off your device and boot it into download mode. To do this, press and hold the Volume Down + Home + Power buttons together until you see a warning screen. Then press the Volume Up button to confirm.
Connect your device to your PC using the USB cable. Odin should recognize your device and show a blue or green box in the ID:COM section.
Click on the AP button in Odin and browse to the .tar.md5 file that you extracted from the stock rom zip file.
Make sure that only Auto Reboot and F. Reset Time options are checked in Odin. Do not check any other options or change any settings.
Click on the Start button in Odin to begin the flashing process. Wait for some time until you see a PASS message in Odin.
Your device will reboot automatically after the flashing is done. You can disconnect your device from your PC.
Congratulations! You have successfully installed the official stock rom on your Samsung Galaxy J1 SM-J100H DS.
Troubleshooting
If Odin fails to flash the stock rom or gets stuck, try using a different USB port or cable, or reinstalling the Samsung USB drivers.
If your device gets stuck on bootloop or does not boot up after flashing, try performing a factory reset from recovery mode. To do this, press and hold the Volume Up + Home + Power buttons together until you see the recovery screen. Then use 66dfd1ed39
Saala Khadoos Hd 1080p Full Movie Download<br>Forever By Judy Blume Epub<br>Gary Clark Jr. Discography Torrent<br>