How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-06 · 6 min read · Independent comparison
• Bloody M70 — biggest strength: 6 hours per charge, about 24 hours with the case, plus dual ENC noise-cancelling mics and IPX4 splash resistance. Biggest trade-off: Bluetooth 5.0 only — no dedicated low-latency dongle or 2.4G link.
• ONIKUMA GAMING Earbuds Mic-Headphones — biggest strength: 20ms ultra-low latency with 2.4G wireless plus Bluetooth 5.3, and dual-device switching between console and phone. Biggest trade-off: the battery life per charge isn't specified, and noise control is passive rather than active.
• Pick Bloody M70 if you want long battery life and a rugged-enough pair for motorcycle rides and everyday calls.
• Pick ONIKUMA GAMING Earbuds Mic-Headphones if low latency gaming earbuds performance is your number one priority across PC, PS4, PS5, Switch and VR.
The Bloody M70 is built around endurance and clear voice pickup. Bloody rates it at 6 hours of playback on a single charge, extending to roughly 24 hours with the charging case, and the case tops up in about 2 hours while the buds themselves charge in around 1.5 hours. That math matters for anyone who doesn't want to think about charging mid-ride: a single charge covers a long commute or an afternoon out, and the case carries you through the rest of the day. For a rider hunting the best in ear earbuds for motorcycle use, that kind of staying power is the whole point.
Sound comes from a 6mm M.O.C.I. hybrid diaphragm dynamic driver with a 20Hz–20kHz range and 16 ohm impedance, and the earbuds use binaural synchronous transmission, so either bud works independently. Dual ENC noise-cancelling mics cut background noise on calls — genuinely useful when you're taking a hands-free call and wind and traffic are competing with your voice. A touch on the right earbud three times flips between Game and Music mode, so you can drop into low-latency mode for a mobile game and back to music without digging through menus. Bluetooth 5.0 gives a 10-meter range, and IPX4 means splashes and light rain are handled.
Who should buy it: riders and commuters who want one pair for music, calls and casual gaming, and anyone who values a full day of battery over a spec-sheet latency figure. Who should skip it: competitive players who need the absolute lowest latency link and console users who want a 2.4G dongle — the M70 is Bluetooth-only, and while its Game mode reduces delay, it isn't a dedicated low-latency wireless protocol. It also ships with three sleeve sizes (S/M/L) and carries a warranty, which is a nice bit of peace of mind for a daily-wear pair.
The ONIKUMA GAMING T27 is the more purpose-built gaming tool of the two. Its headline number is 20ms ultra-low latency, achieved through 2.4G wireless technology working alongside Bluetooth 5.3. That combination matters because it's what lets the T27 talk to a PC, PS4, PS5, Switch or VR headset through a USB-C dongle while still being a normal Bluetooth earbud for your phone. Dual-device smart connection means you can be mid-match on your console and still take a call on your smartphone without repairing — a small feature that becomes a big deal once you rely on it.
Audio is handled by dual 13mm dynamic EQ drivers with a 20Hz–20,000Hz range, tuned for powerful bass and clear treble. ONIKUMA frames this around spatial awareness — footsteps and gunfire — which is exactly what low latency gaming earbuds are supposed to deliver. A Game/Music switch optimizes the tuning per mode, and the ENC microphone array is aimed at consistent, low-delay voice chat with teammates. Touch controls handle playback and mode switching, the housing is ABS plastic in black, and the charge time is about 1.5 hours.
Who should buy it: console and PC players who want one pair that bridges gaming and phone calls, and anyone who plays VR or fast-paced shooters where audio delay is noticeable. Who should skip it: riders who prioritize maximum battery life and active noise cancellation — ONIKUMA lists passive noise isolation rather than active cancellation, and it doesn't publish a per-charge battery figure, so if a long, predictable runtime is your deciding factor, that's a real gap. For a long battery life kids headset for motorcycle use, the M70's stated runtime is the safer bet.
• Best for lowest latency gaming → ONIKUMA GAMING Earbuds Mic-Headphones. 20ms latency with 2.4G plus Bluetooth 5.3 beats a Bluetooth-only Game mode.
• Best for battery life → Bloody M70. 6 hours per charge and about 24 hours with the case, with published charge times.
• Best for console and PC switching → ONIKUMA GAMING Earbuds Mic-Headphones. PC, PS4, PS5, Switch and VR support with dual-device connection.
• Best for motorcycle and commuting → Bloody M70. IPX4 splash resistance plus long runtime make it the more forgiving daily pair.
• Best for call clarity → Bloody M70. Dual ENC mics with active noise cancellation for voice pickup.
• Best for immersive game audio → ONIKUMA GAMING Earbuds Mic-Headphones. Dual 13mm dynamic EQ drivers tuned for spatial cues.
• Best for a hifi stereo on ear headphones for motorcycle alternative in a compact in-ear form → either. Both use dynamic drivers with a 20Hz–20kHz range, so the choice comes down to latency versus endurance, not raw frequency coverage.
• Best for buyers who want published runtime specs → Bloody M70. ONIKUMA doesn't list a per-charge battery figure.
For most people reading this, I'd buy the Bloody M70. The 6-hour/24-hour battery math, dual ENC mics and IPX4 rating make it the more versatile everyday pair, and it's the one I'd trust on a motorcycle where charging is inconvenient and weather is unpredictable. I'd only steer you to the ONIKUMA GAMING Earbuds Mic-Headphones if competitive, low-latency gaming across console and PC is genuinely your main use — its 20ms 2.4G link is a real advantage there. Both are solid; they just solve different problems, and price is worth checking on Amazon before you commit.
what is low latency gaming in earbuds
Low latency gaming in earbuds means the wireless audio link is fast enough that sound effects arrive nearly in sync with what you see on screen. The ONIKUMA GAMING T27 targets 20ms latency using 2.4G wireless plus Bluetooth 5.3, which is the kind of figure that matters for footsteps and gunfire.
which low latency is best for gaming earbuds
Lower millisecond figures are better, and a dedicated 2.4G connection generally beats plain Bluetooth for delay. The ONIKUMA T27's 20ms rating with 2.4G is the lower-latency option here, while the Bloody M70 relies on Bluetooth 5.0 with a Game mode touch toggle.
what is low latency gaming mode in earbuds
It's a setting that reduces audio delay by prioritizing fast transmission over other processing. On the Bloody M70 you tap the right earbud three times to switch between Game and Music mode, and the ONIKUMA T27 uses a game/music switch that also retunes the sound for footsteps and gun sounds.
The Bloody M70 is the better fit on paper, thanks to IPX4 splash resistance, dual ENC noise-cancelling mics and about 24 hours of total battery with the case. The ONIKUMA T27 has passive noise isolation and no published per-charge runtime, so it's less predictable for long rides.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: CXK Bone Conduction Headphones vs RR SPORTS IP68, Tatybo PC Gaming Headset vs Kosker Controller & Headset, Sennheiser BTD 700 vs Yunseity LE502: APTX Adaptive, Yamaha HPH-MT220 vs Sennheiser HD 200: Recording Studio