Madara Mohoppu, Utsab Ayan, Bibek Kattel, Oussama Oulhakem, Winn Elliott Hutchcraft, Mine Ucak-Astarlioglu, Ahmed Al-Ostaz, Byron S. Villacorta, "Morphology-driven electromagnetic shielding performance of graphitic nanoparticles in segregated polypropylene nanocomposites via electromagnetic melt processing", Composites Communications, vol 60, 2025
B. Kattel, P. Vashisth, A. Syed, W. E. Hutchcraft, E. Tanner, “Radio Frequency Characterization of Gold Nanoparticles with 3D Printed U-Cavity Sensor”, IEEE Sensors Journal, 2025
B. Kattel, W. E. Hutchcraft and R. K. Gordon, “Evaluating the Relationship between Relative Permittivity and Infill Density in 3D Printed Dielectric Slabs” IEEE Access, 2025
B. Kattel, W. E. Hutchcraft and E. Norwell, “Evaluating the effectiveness of flipped learning in an upper-division undergraduate electrical engineering course”, Discover Education, vol. 3, no. 268, 2024
B. Villacorta, U. Ayan, M. Mohoppu, B. Kattel, E. Hutchcraft, M. Ucak-Astarlioglu, A. Al-Ostaz, “Flexible Polyethylene Matrix Carbon-based Nanocomposites for Electromagnetic Compatibility”, ACS Applied Electronic Materials Journal, vol. 6, no. 7, pp. 5379-5390, 2024
C. Keathley, B. Kattel, W. E. Hutchcraft and R. Gordon, “Analysis of Antenna Manufacturing Methods: Addressing Challenges in 3D Printing”, IEEE SoutheastCon, 2024
B. Kattel, U. Ayan, M. Mohoppu, B. Villacorta and W. E. Hutchcraft, “Enhancing Permittivity of 3D Printing Filaments via Nanocompounding for Electromagnetic Applications”, IEEE SoutheastCon, USA, 2024
B. Kattel, W. E. Hutchcraft, and R. K. Gordon, “An Investigation of the Relationship between Effective Relative Permittivity and Infill Density in a 3D Printed Slab”, Applied Computational Electromagnetics Society Journal, vol. 38, no. 12, pp. 981–986, 2023
B. Kattel, W. E. Hutchcraft and R. K. Gordon, “3D Printed Patch Antennas with Varying Infill Densities”, Antenna Measurement Techniques Association Symposium (AMTA), 2023
B. Kattel, W. E. Hutchcraft and R. K. Gordon, “Exploring Infill Patterns on Varying Infill Densities on Dielectric Properties of 3D Printed Slabs”, Antenna Measurement Techniques Association Symposium (AMTA), 2023
B. Kattel, Winn Elliott Hutchcraft, & Richard Gordon (2023, Mar). ”Infill density as a design parameter for Additive Manufacturing”, 2023 BWAC NSF IAB Spring Meeting, The Catholic University of America, Washington, DC (Poster)
B. Kattel, Daniel Ferro, Winn Elliott Hutchcraft, & Richard Gordon (2022, Aug). ”Antenna Design using Additive Manufacturing Method”, 2022 BWAC NSF IAB Fall Meeting, University of Mississippi, Oxford, Mississippi (Poster)
B. Kattel, Winn Elliott Hutchcraft, & Richard Gordon (2022, Jul). ”On the modeling of 3D-printed substrates to estimate permittivity based on differing infill densities”, 2022 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (AP-S/URSI), Denver, CO (Oral)
B. Kattel, Winn Elliott Hutchcraft, & Richard Gordon (2021, Nov). ”Ongoing Investigation of 3D-Printing RF Devices”, 2021 BWAC NSF IAB Fall Meeting, NC State University, Raleigh, NC (Oral)
B. Kattel, Winn Elliott Hutchcraft, Caleb Keathley, & Richard Gordon (2021, Jun). ”Ongoing Investigation of 3D-Printing RF Devices”, 2021 BWAC NSF IAB June Meeting, Online (Oral, Poster)
B. Kattel, Winn Elliott Hutchcraft, Caleb Keathley, & Richard Gordon (2020, Nov). ”Evaluation of 3D Printed Substrates and RF Devices : Estimating Relative Permittivity for Infill Percentage”, 2020 BWAC NSF IAB Fall Meeting (Online) (Oral)
B. Kattel, Thomas Garner, W. Elliott Hutchcraft, & Richard Gordon (2019, Sep). ”Evaluation of Wireless Router Antennas and 3D Printed Antenna”, 2019 BWAC NSF IAB Fall Meeting, The Catholic University of America, Washington, DC (Poster)