How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want compact in-ear earphones with a 12mm bass driver, a tangle-free 1.2m cord and a full set of ear-tip sizes plus a case, choose Betron BS10; if you need kid-friendly over-ear headphones with a volume limit, soft padded cushions and a foldable, braided-cable build for school and travel, choose IMYB V8.
• Betron BS10 — biggest strength: A 12mm dynamic driver in a lightweight 16g aluminium in-ear design, with three sizes of silicone tips and a carrying case included.
• Betron BS10 — biggest trade-off: No microphone, no inline remote and no volume controls. It's a pure listening earphone.
• IMYB V8 — biggest strength: Over-ear comfort for kids with padded cushions, an adjustable headband, a foldable frame and a volume limit for safer listening.
• IMYB V8 — biggest trade-off: It's built for children and teens (roughly ages 3–15), so adults wanting a discreet in-ear fit will find it bulky and specifically aimed at a younger user.
• Pick Betron BS10 if you want simple, wired, in-ear listening for music, commuting, workouts or audio monitoring.
• Pick IMYB V8 if you're buying for a child who needs durable, comfortable over-ear headphones for school, tablets or travel.
The BS10 is a straightforward wired earphone, and its whole personality comes from that simplicity. The 12mm dynamic driver is the headline — a relatively large driver for an in-ear, tuned for deep bass with clear mids and natural vocals. If you mainly listen to music, podcasts or spoken audio and you want that fuller low end, this is the part of the design doing the work. The 16 ohm impedance and 20 Hz–20 kHz frequency range put it in the easy-to-drive category, so it doesn't demand a headphone amp to sound like itself.
Fit is clearly a priority here. You get three pairs of silicone tips in small, medium and large, plus a cable clip, so you can dial in the seal that suits your ears. That seal matters because the ergonomic in-ear shape provides passive noise isolation — it reduces surrounding sound naturally rather than through electronics. The aluminium housing keeps the weight at just 16g, and the 1.2m tangle-resistant cord is long enough to reach a pocket or bag without turning into a knot. A carrying case is included for storage.
IMYB V8: Who It's For
The IMYB V8 is a different animal entirely, and reading the spec sheet makes the intent obvious: these are headphones for kids. The over-ear design with padded soft cushions and an adjustable headband is about comfort over longer stretches — a child wearing headphones through a lesson, a long car ride or a flight. The frame folds for more compact storage, which is a small detail that matters a lot when you're packing a school bag.
The 40mm drivers are the largest number on the sheet, and IMYB pairs them with a "balanced stereo" tuning described as rich bass and crisp highs. For learning apps, videos, music and games, that's a sensible target. The build leans into durability too: an ABS plastic enclosure and a nylon braided, tangle-free cable that's meant to survive drops and tugs. The cable runs about 5 feet, which gives a child room to move without yanking the plug out of a tablet.
The safety angle is the real differentiator. A volume limit is built in to keep listening levels in a safer range for young ears, and the over-ear cushions provide some sound isolation on top of that. There's also a remote with volume control on the cable. The blue colourway and school-oriented styling make it clear who this is aimed at — roughly ages 3 to 15. If you're an adult shopping for yourself, this isn't the pick; the design is bigger, more visible and purpose-built for a younger wearer. If you're a parent or buying a gift for a child, the combination of comfort, durability and volume limiting is exactly what you'd want.
Side-by-Side: Which Should You Choose?
• Best for safer listening with kids → IMYB V8. The built-in volume limit and over-ear isolation are aimed squarely at younger ears.
• Best for discreet, portable listening → Betron BS10. At 16g with a 1.2m cord and a case, it disappears into a pocket.
• Best for bass-focused music → Betron BS10. The 12mm dynamic driver is tuned for deep bass with clear mids.
• Best for long-wear comfort on a child → IMYB V8. Padded cushions and an adjustable headband suit longer sessions.
• Best for latency-sensitive audio → Betron BS10. The wired 3.5mm connection gives 0ms audio latency for real-time sound.
• Best for rough daily handling by a kid → IMYB V8. ABS housing and a nylon braided tangle-free cable are built for drops and tugs.
• Best for fit flexibility in your own ears → Betron BS10. Three silicone tip sizes (S/M/L) plus a cable clip let you tune the seal.
In my opinion, these two barely compete — they're aimed at different people, and that's the point. If I were buying for myself, I'd take the Betron BS10: I want a light in-ear with real bass, a proper fit from the included tip sizes and a no-fuss wired connection for music and monitoring. If I were buying for a child heading to school or on a trip, I'd take the IMYB V8 without hesitating, because the volume limit, padded over-ear comfort and rugged braided cable are exactly what that job needs. Match the product to the listener and you won't go wrong. Either way, check the current price on Amazon before you commit.
how to wired headphones work
A wired headphone turns an electrical audio signal from your device into sound. The 3.5mm jack carries that signal down the cord to the drivers — a 12mm dynamic driver in the Betron BS10 and 40mm drivers in the IMYB V8 — which move air to create the sound you hear. No battery or pairing is involved.
how to wired headphones
Plug the 3.5mm jack into a compatible device — a laptop, tablet, smartphone or MP3 player with a standard 3.5mm port. Both of these use that same connection, so there's nothing to charge or pair. On the BS10 there are no controls at all; on the IMYB V8 you get a cable remote with volume control.
how to use wired headphones with iphone
It depends on the iPhone's port. These headphones use a standard 3.5mm jack, so a model with a headphone jack connects directly. Newer iPhones without a 3.5mm port need a suitable adapter, since neither headphone ships with a Lightning or USB-C plug.
how to fix wired headphones no sound
Start by checking the obvious: is the jack fully seated, and is the volume up on the device? Try the headphones on another device to see whether the problem follows the headphones or the source. If one side is silent, a damaged cord or plug is a common cause — the Betron BS10's tangle-resistant 1.2m cord and the IMYB V8's braided cable are both designed to reduce that kind of wear.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: YINYOO KZ ZS10 vs Berufexp Earbuds, SOULWIT Cooling Gel Replacement vs ProtectHobby Headphone Storage Clas, SOULWIT Cooling Earpads vs ANSHAWTIY Gaming Controller Holder, Turtle Beach Scout Air vs Picun V1