How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-08 · 6 min read · Independent comparison
• Betron BS10 biggest strength: 12mm dynamic drivers with a 3.5mm jack, inline mic plus volume controls, and no charging or Bluetooth pairing ever required.
• Betron BS10 biggest trade-off: Newer phones without a headphone jack need an adapter, and the noise isolation is passive only — no active noise cancellation.
• Guguearth biggest strength: Apple MFi certified Lightning connector, magnetic earbuds that hang around your neck, and reinforced TPE cable with oxygen-free copper wiring.
• Guguearth biggest trade-off: It only works with Lightning-port Apple devices — nothing else — and there is no inline volume control.
• Pick Betron BS10 if you want one pair that plugs into phones, tablets, laptops and gaming devices, or you want an earphone for call center work that never runs out of battery.
• Pick Guguearth if you own an iPhone 7 through iPhone 14 and want a certified, purpose-built wired pair that matches your connector exactly.
The BS10 is the "works with everything" pick. Its 3.5mm jack is the old universal standard, and Betron lists compatibility with smartphones, tablets, laptops, computers and gaming controllers. That breadth is the whole point: one pair of buds moves from your desk to your commute to a game controller without a second thought. The 12mm dynamic drivers are the largest in this comparison, and Betron tunes them for rich low-end bass with clear vocals — a sound profile that suits music, videos and voice calls alike.
For call center work specifically, the wired design is the quiet advantage. There's no battery to die mid-shift, no pairing to drop, and no charging cable to remember. The inline microphone and volume controls let you answer calls and adjust levels without touching your phone, and the ergonomic in-ear fit with three sizes of silicone tips provides passive noise isolation that helps push background chatter down. Sensitivity is rated at 112 dB with 16 ohm impedance, which means these are easy to drive — they'll get loud off a phone or a laptop headphone jack without extra amplification.
Guguearth iPhone Headphones Earphones: Who It's For
The Guguearth pair is the specialist. It exists for one job: to plug directly into a Lightning port and work properly. The Apple MFi certification matters here, because it means the connector and electronics meet Apple's licensing requirements for Lightning accessories rather than being an unverified third-party plug. The compatibility list is explicit — iPhone 14, 13, 13 Mini, 13 Pro, 13 Pro Max, 12 series, 11 series, X, XS, XS Max, XR, 8, 8 Plus, 7, 7 Plus, and iPads with a Lightning port. If your phone is on that list, this is a clean plug-and-play match with no adapter in the chain.
The design details show real thought about daily wear. The magnetic earbuds snap together so you can hang them around your neck between calls instead of stuffing them in a pocket, and a travel pouch and carrying case are included. The cable uses reinforced TPE coating and oxygen-free copper wire for data transmission, with a stainless steel frame protecting the Lightning connector — the parts that usually fail first on cheap wired buds. The angled housing is shaped to follow the natural curve of your ear, and Guguearth includes three sizes of silicone tips for a secure seal and better passive isolation.
The audio side is more modest: 10mm dynamic drivers, 32 ohm impedance and 96 dB sensitivity. That's a lower-sensitivity, higher-impedance combination than the Betron, so it will sound a little quieter at the same volume setting — fine for calls and everyday listening, but less punchy for bass-heavy music. The bigger limitations are control and reach. There's no inline volume control, so you'll adjust volume on the phone itself, and there's no 3.5mm option at all, so this pair is useless with laptops, Android phones or gaming controllers. For iPhone owners who want a wired set that just works, that's an acceptable trade.
Side-by-Side: Which Should You Choose?
• Best for call center use → Betron BS10. No battery, no pairing, inline mic and volume controls, and a 112 dB sensitivity rating that keeps voices loud and clear through long shifts.
• Best for multi-device households → Betron BS10. One 3.5mm plug covers phones, tablets, laptops and gaming controllers.
• Best for tangle and wear resistance → Guguearth. Magnetic earbuds, reinforced TPE cable, oxygen-free copper wiring and a stainless steel connector frame.
• Best for bass and volume headroom → Betron BS10. Larger 12mm drivers, 16 ohm impedance and higher sensitivity make them easier to drive and fuller at the low end.
• Best for comfort during long wear → Guguearth. The angled housing is shaped to the natural curve of the ear and both brands include three tip sizes.
• Best for portability extras → Guguearth. You get a travel pouch and carrying case in the box; Betron includes a storage pouch and extra tips.
• Best for peace of mind on the plug → Guguearth if you're on iPhone; Betron if you want a 12-month manufacturing warranty across a wider device range.
In my opinion, the Betron BS10 is the better buy for most people — especially anyone doing call center work or splitting audio between a phone, a laptop and a gaming controller. The 3.5mm jack, 12mm drivers, inline volume control and no-charging design simply cover more ground. I'd recommend the Guguearth only if you're locked into a Lightning iPhone and want a certified, magnetic, adapter-free pair that's clearly built to survive daily handling. Check the current price on Amazon for whichever one matches your device, then decide.
how to wired headphones work
Wired headphones pass an analog audio signal from your device through the cable to the drivers inside each earbud. The Betron BS10 uses a 3.5mm jack and 12mm dynamic drivers; the Guguearth uses a Lightning connector and 10mm dynamic drivers. Neither needs charging or Bluetooth pairing.
how to use wired headphones with iphone
If your iPhone has a Lightning port, the Guguearth pair plugs straight in with no adapter — it's listed as compatible with iPhone 7 through iPhone 14 and Lightning iPads. The Betron BS10 uses a 3.5mm jack, so a newer iPhone without a headphone jack would need an adapter.
how to fix wired headphones no sound
Start with the connection: make sure the plug is fully seated in the port, and if you're using the Betron on a jackless phone, confirm your adapter is working. Check that the inline or on-device volume isn't turned all the way down, and try the headphones on a second device to isolate whether the fault is the cable, the port or the source.
are these earphones noise cancelling
No — both rely on passive noise isolation, not electronic active noise cancellation. The Betron BS10 blocks sound through its snug in-ear seal, and the Guguearth does the same with its silicone tips and angled housing. Expect reduced background noise, not silence.
• gidosha Open Bone Conduction vs EEXXYZ Open Ear Earbuds
• BUABMEQ Clip vs Nequga Earbuds
• Philips Kids Headphones vs Amazon Basics Ear
• our 1MORE Fit Open Earbuds vs RED STAR TEC T-90 pick
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.