How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a budget-friendly, multi-platform headset with a boom mic that mutes in one tap and passive noise isolation built into thick over-ear cushions, choose BENGOO Pro Gaming Headset; if you need a lighter headset with bigger drivers, a mic engineered to reject off-axis noise, and a 3.5 mm jack that works across consoles and PC without adapters, choose Razer BlackShark V2.
• BENGOO Pro Gaming Headset — biggest strength: a 40 mm driver with a 22-ohm impedance that's very easy to drive, plus a rotary volume wheel and one-key mic mute on the cable — controls you can find by feel mid-match.
• BENGOO Pro Gaming Headset — biggest trade-off: it connects over USB, not a 3.5 mm jack, so it's tethered to devices with a USB port, and older Xbox One controllers need a separate Microsoft adapter that isn't included.
• Razer BlackShark V2 — biggest strength: closed earcups with a close-sealing memory foam cushion, paired with 50 mm drivers and a cardioid mic that tapers off at the back and sides, so your voice comes through cleaner with less room noise.
• Razer BlackShark V2 — biggest trade-off: it's a 3.5 mm analog headset with no on-cable mute button — the only on-headset control is a volume wheel — and the pink finish is a bold look, not a neutral one.
• Who each pick is for: BENGOO for a first gaming headset on a tight budget who plays across many USB devices; Razer for a console-first player who wants lighter weight, stronger isolation, and cleaner mic pickup.
The BENGOO Pro Gaming Headset (model G9000) is built around a straightforward idea: put the controls where your hand already is. The braided USB cable carries an in-line box with a rotary volume wheel and a one-key mic mute, so you're not alt-tabbing or hunting for a software panel when you need to go quiet. That matters more than people admit — a mute you can hit instantly is the difference between a clean callout and an embarrassing one.
On the audio side, it runs a 40 mm dynamic driver with a 22-ohm impedance and a 20 Hz–20 kHz frequency range. Low impedance like that is genuinely useful: it means the headset gets loud and full off modest sources without demanding a dedicated amp. BENGOO also stuffed thickened protein over-ear pads and a breathable memory foam cushion into the frame, and the design leans on that padding for passive noise isolation — the cushions seal around your ears and physically block some outside sound rather than processing it electronically. The adjustable headband and metal frame are aimed at long sessions, and there's a 49-inch cable with anti-winding braiding, so you have real slack to move.
It's also flexible in a scattershot way: PS4, PS5, PC, Switch-adjacent handhelds, laptop, tablet, phone — anything with a USB port. The catch is exactly that. It's a USB headset, not a 3.5 mm one, so it won't plug into a phone's headphone jack or a console controller's audio port. And if you're on an older Xbox One controller, you'll need an extra Microsoft adapter that isn't in the box.
Buy it if you want one cheap-feeling-complexity headset that works across your USB devices, you like physical controls on the cable, and you want plush over-ear padding for marathon sessions. Skip it if you need a 3.5 mm jack for a controller or handheld, or you want your headset to disappear on your head — the metal frame and thick pads add up to 0.44 kg.
The Razer BlackShark V2 X takes the opposite approach: it strips the electronics out of the cable and puts the weight savings into the drivers. At 240 g with thicker headband padding and leatherette memory foam ear cushions, it's the one you're meant to forget you're wearing during a long tournament grind. Fewer grams on your skull is a real, cumulative comfort win that no feature list can fake.
The headline spec is the 50 mm TriForce titanium driver, which Razer divides into three tuned sections for highs, mids, and lows. Bigger drivers with dedicated tuning zones typically translate to a wider soundstage and more distinct separation between a footstep and a distant explosion — the kind of detail that decides fights. Impedance is 32 ohms with a 20 Hz–28,000 Hz frequency range, and sensitivity is rated at 100 dB. That extended top end is well past what the BENGOO offers, which matters if you care about the sparkle of high-frequency detail.
Where this headset clearly wins on your chosen angle — noise isolating headphones — is the closed-back design. The earcups fully enclose the ear, and the cushions are shaped to seal tighter, so outside noise has a harder time leaking in. That's passive isolation done properly: no batteries, no processing, just a good seal. The cardioid mic reinforces the same philosophy, using a pickup pattern that fades toward the back and sides so keyboard clatter and room hum stay out of your voice, with a bendable boom you can park right at your mouth.
Then there's the 3.5 mm jack. It's the least glamorous feature and the most useful one: it plugs into a PS5 controller, an Xbox Series X controller, a Switch, or a PC, no adapter required. The trade-off is control. You get a volume wheel on the headset, but no mute button on the cable, so muting means using your platform's software. And the Quartz Pink finish is a statement — great if you want it, a dealbreaker if you don't.
Side-by-Side: Which Should You Choose?
• Best for noise isolation → Razer BlackShark V2. Closed earcups with a close-sealing cushion are explicitly designed to keep outside noise out; the BENGOO relies on thickened pads alone.
• Best for microphone clarity in a noisy room → Razer BlackShark V2. The cardioid pattern tapers off at the back and sides, so it rejects more of what you don't want picked up.
• Best for instant mute control → BENGOO Pro Gaming Headset. The one-key mute and rotary volume wheel live on the cable, no software needed.
• Best for long-session comfort → Razer BlackShark V2. At 240 g it's dramatically lighter than the BENGOO's 0.44 kg, with thicker headband padding.
• Best for console controller plug-in → Razer BlackShark V2. The 3.5 mm jack goes straight into PS5, Xbox Series X, or Switch controllers; the BENGOO is USB-only and needs an adapter for older Xbox One controllers.
• Best for driver headroom → Razer BlackShark V2. 50 mm drivers and a 20 Hz–28,000 Hz range versus 40 mm and 20 Hz–20,000 Hz.
• Best for easy-to-drive volume on weak sources → BENGOO Pro Gaming Headset. Its 22-ohm impedance is lower than Razer's 32 ohms, so it needs less power to get loud.
• Best for a broader device menu → BENGOO Pro Gaming Headset. It lists PS4, PS5, PC, laptop, tablet, phone, and more — as long as the device has USB.
I'd buy the Razer BlackShark V2. If noise isolation is what you're actually shopping for, its closed earcups and close-sealing cushions are purpose-built for it, and the cardioid mic keeps your voice clean when the room isn't quiet. Add the 50 mm drivers, the 240 g weight, and the plug-and-play 3.5 mm jack, and it covers more of the situations a real gamer runs into. I'd only steer you to the BENGOO if the cable mute button and the lower impedance matter more to you than isolation and weight — both are legitimate reasons, just narrower ones.
how to noise cancelling headphones work
There are two mechanisms, and neither headset here uses the active kind. Passive isolation — what both of these rely on — works by physically sealing the ear with cushioned closed earcups so sound waves can't leak in. The Razer BlackShark V2 leans harder into this with a tighter-sealing cushion design.
how to use noise cancelling headphones
For passive models like these, you just wear them properly. Center the earcups over your ears and let the cushions form a full seal — a gap at the edge lets noise straight in. On the Razer, the closed earcups and plush memory foam do the work; on the BENGOO, the thickened protein pads provide the isolation.
how to test noise cancelling headphones
Play steady background noise — a fan, a TV, traffic — then put the headset on with nothing playing. If the noise drops noticeably, the seal is working. Try again with the earcups slightly repositioned to confirm you're getting a proper seal rather than a lucky angle.
Based on the specs, yes. Razer explicitly designs its closed earcups and close-sealing cushions for sound isolation, while BENGOO's isolation comes from thickened padding. If blocking outside noise is your priority, that design difference points clearly to the Razer.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Amazon Renewed Razer BlackShark V2 vs AOC Gaming Headset, FEDIKER Gaming Headset vs KASOTT Battle Buds Pro: PC Gaming, Razer Base Station V2 vs PDP AIRLITE Glow Pro: Game Headset