Belkin.Range - Setting up the Belkin Wi-Fi Range Extenders
Belkin.Range - Setting up the Belkin Wi-Fi Range Extenders
Belkin has a wide variety of networking items, including range extenders, switches, hubs, and more. The Belkin extenders address Wi-Fi/internet access issues and provide a fast and stable internet connection in the desired place. Users can expand the range of their current network with the help of Belkin Range Extenders. Therefore, users are advised to complete the Belkin Extender Setup process. However, to execute the Belkin Range Extender Configuration process, users must first go to the Belkin.Range website, where they can efficiently complete the process. Hence, this write-up includes the Belkin extender's advantages and steps to perform the extender setup process via WPS PIN and PBS methods. It also has ways to solve the belkin.range not accessible issue.
The benefits of the Belkin Range Extender are mentioned in this section. Therefore, users are advised to read through the following points.
The Belkin Range Extender is compatible with both Macintosh and PCs.
It also has wireless features, including WEP encryption (64- and 128-bit) and WPA/WPA2 encryption.
The wirelessly networked computers can be added to the wired network by the users.
Users can also expand the wireless networking coverage.
The Belkin Extender also has a configuration push-button.
It is also compatible with any 802.11b 2.4GHz wireless device.
The Belkin range extender setup is easy and can be performed in just a few steps. The users can begin the setup process by visiting the belkin.range. This section includes the steps to set up the Belkin range extender via the WPS PIN method. Hence, the users are advised to go through the following instructions.
Note: The users are recommended to change the wireless router's security mode to WPA/WPA2 before starting the setup procedure.
In the beginning, the users are suggested to turn the range extender “ON” and connect to a working internet connection.
After that, the users are advised to open the internet browser on their device and search for “belkin.range” in the browser's address section.
After this, users will be directed to the extender setup page, from where they are required to login to the extender network.
The users must enter the “Username” and “Password” in the required fields to successfully log in to Belkin Extender.
After that, the users should move to the extender network settings and tap on the WPS (Wi-Fi Protected Setup).
Next, the users must enter the PIN in the given section and tap on the “Enroll” button.
Lastly, the users should wait for two minutes till the Belkin range extender gets connected with the wireless router.
Hence, the users can smoothly execute the Belkin range extender setup using the WPS PIN method. If the users encounter any issue while performing the above steps, they must contact the technical team of Belkin to solve their problem in no time.
The Belkin Range Extender Setup can be executed through the WPS PBS (Push Button Configuration) method. The users can smoothly complete the setup procedure by visiting the belkin.setup web-based setup page. Therefore, the users are recommended to go through the following guidelines for the same.
Note: The users should keep the range extender near the router during the setup procedure.
Firstly, the users are suggested to turn the Belkin Range Extender “ON.”
After that, the users must press and hold the WPS Key located on the range extender.
After pressing the WPS key, the setup will be initiated.
After this, the users should move to the main router and press and hold the “WPS Key” for a few seconds.
Lastly, the router and the range extender will exchange security authentication.
Hence, once the users have executed the above instructions, the setup procedure will be finished successfully.
The users can efficiently perform the range extender’s setup procedure using the WPS PBC method. If the users encounter any issue during the above process, they must contact the customer support team to get a solution.
The users must go through the below points to solve the belkin.range not accessible issue.
Belkin.range web page will only work if the users are connected with the Belkin range extender, either with a wired or wireless connection.
The users can try using “192.168.206.1” instead of “belkin.range” to access the setup page.
The users can type the web address in the URL section instead of typing in the search engine.
Note: If none of the above-provided solutions work, users must hard reset the Belkin range extender or contact the customer support expert team to solve the problem.
This write-up includes the Belkin extender's advantages and steps to perform the extender setup process via WPS PIN and PBS methods. It also has ways to solve the belkin.range not accessible issue.