We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-19 · 7 min read · Independent comparison
If you want to turn your existing wired in-ear monitors into true wireless with high-fidelity codecs and multi-day battery life, choose Bawjog KZ XZ10; if you need a TV transmitter that streams audio to Bluetooth headphones and modern Auracast-ready hearing aids, choose Avantree Audikast 3.
These two products barely share a category, and that is the first thing to understand before comparing them. One is an earhook adapter that converts wired IEMs into wireless earbuds. The other is a home audio transmitter that takes sound from your television and sends it to whatever you already wear on your ears. They solve opposite problems: one makes your headphones wireless, the other makes your TV wireless. If you are torn between them, the real question is whether your bottleneck is your earphones or your television.
• Bawjog KZ XZ10 — biggest strength: It upgrades any wired in-ear monitor into a Bluetooth 5.3 wireless setup using the Qualcomm QCC5171 chip, aptX lossless decoding, and up to 72 hours of total battery life with the charging case.
• Bawjog KZ XZ10 — biggest trade-off: It only works with headphone-specific wired earphones that accept an earhook-style adapter, and it depends on your existing IEMs for sound quality; it is not a standalone pair of earbuds.
• Avantree Audikast 3 — biggest strength: It brings Bluetooth 5.4 and Auracast to a television via Optical or AUX output, so you can stream TV audio privately to Bluetooth headphones or Auracast-enabled hearing aids.
• Avantree Audikast 3 — biggest trade-off: It is a stationary transmitter, not a wearable audio device. It needs a TV with Optical or AUX output and compatible receiving devices; it does not make your wired earphones wireless.
• Pick the Bawjog KZ XZ10 if you already own wired IEMs and want to cut the cord while keeping their signature sound.
• Pick the Avantree Audikast 3 if you want private TV listening for headphones or Auracast hearing aids without running a long cable across the room.
The KZ XZ10 is a niche product, but a well-defined one. It is an earhook adapter for wired in-ear monitors — the kind of IEMs that audiophiles and musicians already own. Instead of replacing those earphones with generic true wireless earbuds, you clip the XZ10 earhooks onto them and turn them into a Bluetooth 5.3 wireless setup. The Qualcomm QCC5171 chipset inside handles the wireless work, and the earhook design keeps the cable-free experience close to the shape of a standard IEM.
Battery life is genuinely generous for the category. The earhooks run about 12 hours per charge from a 50mAh cell each, and the 800mAh charging case adds roughly six more charges for up to 72 hours total. The around-ear hooks use skin-friendly silicone, which matters if you wear IEMs for long sessions. The color is black, and the adapter is covered by a one-year manufacturer warranty.
Who should buy it: anyone with wired in-ear monitors who wants to go wireless without giving up their IEMs, especially if they care about aptX and low latency for gaming or TV. Who should skip it: anyone without compatible wired earphones, anyone who wants a self-contained pair of earbuds, and anyone who prefers over-ear headphones — this is built specifically for the in-ear monitor form factor.
Avantree Audikast 3: Who It's For
The Audikast 3 solves a completely different everyday problem: getting TV audio into your ears without disturbing anyone else. It is a 2-in-1 Bluetooth transmitter that connects to your television through Optical or AUX output and streams that audio to Bluetooth headphones from brands like AirPods or Bose. That makes it a private-listening tool for late-night TV, for households where one person wants volume and another wants quiet, or for anyone who struggles to hear dialogue clearly through TV speakers.
What sets this model apart is Auracast. The Audikast 3 runs Bluetooth 5.4 with Auracast support on a Qualcomm chipset, and it is explicitly designed for modern Auracast-capable hearing aids such as GN Danalogic Extend, Jabra Enhance Pro 20, and ReSound Nexia. That is a meaningful detail for hearing-aid users, because Auracast is the broadcast standard those devices are moving toward. Pairing with those hearing aids requires compatible devices like a Galaxy S20+ or the official hearing aid apps, so it is not a plug-and-play situation for every setup — but when it works, it streams TV audio directly into the hearing aids with low latency and HD audio quality.
The practical trade-offs are worth being honest about. This is a stationary device that lives near your TV, not something you carry. It needs a TV with Optical or AUX output, and its most advanced features depend on having compatible receiving hardware. Avantree also offers firmware upgrades through its official support page, which is a nice hedge against the standard changing over time. The bundle includes both the Audikast 3 and Audikast 4, so you are effectively getting two transmitter generations in one package.
Who should buy it: TV watchers who want private listening through Bluetooth headphones, and especially hearing-aid users whose devices support Auracast. Who should skip it: anyone whose TV lacks Optical or AUX output, anyone who does not own compatible Bluetooth headphones or hearing aids, and anyone looking for a portable or wearable audio solution.
• Best for turning wired IEMs into wireless → Bawjog KZ XZ10. This is the entire point of the adapter.
• Best for private TV listening → Avantree Audikast 3. It connects to the TV and streams to your headphones or hearing aids.
• Best for battery life → Bawjog KZ XZ10. Up to 72 hours total with the charging case, versus a stationary transmitter that does not rely on a wearable battery at all.
• Best for hearing-aid users → Avantree Audikast 3. Auracast support and compatibility with modern hearing aids make this the clear pick for that audience.
• Best for low-latency gaming and video sync → Bawjog KZ XZ10. The QCC5171 chipset, aptX decoding, and dedicated gaming mode are built for audio-video synchronization.
• Best for multi-device households → Avantree Audikast 3. One transmitter can stream TV audio to Bluetooth headphones, which is ideal when different people want different volumes.
• Best for travel and portability → Bawjog KZ XZ10. The earhooks and charging case fit in a pocket; the Audikast 3 stays with the TV.
• Best for someone who owns neither wired IEMs nor a compatible TV setup → neither, in my opinion. Match the product to the gear you already have before buying either one.
If I had to pick one for myself, I would choose the Avantree Audikast 3, because it solves a problem I cannot solve any other way: getting TV audio cleanly into headphones or hearing aids without disturbing the room. The Auracast support and Bluetooth 5.4 foundation make it the more future-proof buy in my opinion, and the 2-in-1 bundle with the Audikast 4 adds real flexibility.
That said, if you already own a pair of wired in-ear monitors you love, the Bawjog KZ XZ10 is the smarter spend. It preserves the sound you already chose while removing the cable, and the aptX decoding and 72-hour battery figure are genuinely strong for the price class. My recommendation is simple: buy the KZ XZ10 to upgrade your earphones, buy the Audikast 3 to upgrade your TV.
No. It is an earhook adapter designed for wired in-ear monitors. You attach it to your existing IEMs to make them wireless. If you do not own compatible wired earphones, this product will not give you a working setup on its own.
It requires a TV with Optical or AUX audio output. If your television only has HDMI or built-in speakers with no audio output, you will need to check your connections before buying. It is designed to transmit TV audio to Bluetooth headphones and Auracast hearing aids.
They are not directly comparable. The Bawjog KZ XZ10 supports aptX lossless decoding and three sound modes, so its quality depends largely on the IEMs you attach. The Avantree Audikast 3 is built for clear, low-latency TV audio rather than music-grade fidelity, so I would not treat it as a music-listening device.
I do not quote prices here because they change often. Use the "Check latest price on Amazon" button on this page to see current pricing for both, and compare that against your own gear before deciding.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.