Power systems have two major challenges in the form of voltage surges and ground faults that, left unchecked, would harm equipment as well as disconnect electricity from entire communities. A series of robust yet simplistic components ensures that such threats remain minimal. Larger motors incorporate MV Motor Starting Reactors to start smoothly, while the heavily utilised grids employ an HV Reactor to limit the fault current.
Large motors require a massive initial current. This not only causes blinking in the lights but also destabilises the entire network. The MV Motor Starting Reactors are connected in series with the motor for a brief period of time, after which the reactors are bypassed and the motor works at full capacity.
The fault current tends to surge up to dangerous levels instantaneously in case of any fault. Each additional generator or transformer increases the level of fault current. The HV Reactor introduces slight resistance in the system; thus, the fault current remains under control.
Typically, most faults on the overhead line are minor and localised, such as the case of branches making contact with the conductor. An Arc Suppression Coil attaches to the neutral point and neutralises the fault current. Such minor sparks usually extinguish themselves, and therefore, power can continue flowing as the technicians try to find out the reason behind the fault. Arc suppression coils need tuning to match the specific power network because their tuning depends on additions or removals of conductors within the network.
The Bias Magnetic Type Arc Suppression Coil adjusts itself using a change in a small direct current within the device. Since it does not depend on moving parts, it can adjust very fast and easily. The Bias Magnetic Type Arc Suppression Coils are preferred in variable networks because there is less manual work involved.
Some networks do not possess a neutral point to attach to. The Grounding Transformer is used to create a neutral point that can then be connected to the earth, resistance, or through the coil equipment.
In a network of cities that has long overhead lines, the neutral point of the network is established through the use of Grounding Transformers. Small faults can be made to go away by using an Arc Suppression Coil in such neutral points, whereas for self-adjusting faults, one uses a Bias Magnetic Type Arc Suppression Coil. High voltage reactors help keep current within its proper limits in the case of large faults.
1. When do I need MV Motor Starting Reactors?
Use them when a motor’s starting current is too high for your supply. They are common with large pumps, fans, and crushers.
2. What does an HV Reactor protect?
It protects breakers, cables, and transformers from very high fault current. It also helps keep the network stable.
3. Is a Bias Magnetic Type Arc Suppression Coil hard to run?
No. It tunes itself with no moving parts, so daily work is light. Regular checks are still wise.
4. Why add Grounding Transformers to a network?
They create a neutral point where none exists, so protection and earthing devices can work.
Effective protection operates silently behind the scenes. MV Motor Starting Reactors provide a stable start for motors, a Bias Magnetic Type Arc Suppression Coil helps in handling any minor faults in the network, and Grounding Transformers give the system a strong foundation. Share detailed site information and ask all your queries before placing an order. The Weifan Electric Group is a leading supplier of reactors, neutral grounding devices, power resistors, transformers, and switchgear to customers around the world.