How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a stage-ready in-ear monitor with a replaceable MMCX cable and serious noise isolation, choose BASN Bsinger BC100; if you need a lightweight, budget-friendly sport earphone with an inline volume slider for running and gaming, choose Holiper Dual Driver.
• BASN Bsinger BC100 — biggest strength: a proper monitoring design: dual dynamic micro drivers, ergonomic molded shells, memory earhooks and a detachable woven MMCX cable you can swap or upgrade.
• BASN Bsinger BC100 — biggest trade-off: it is the fussier, more specialist pick. A 3.5 mm wired connection with a 1/4" adapter-style L jack, no inline volume slider, and you are expected to treat it like gear, not a throwaway pair.
• Holiper Dual Driver — biggest strength: simplicity and comfort for movement: over-ear ear-hook fit, a tangle-free 1.2 m braided cable, tactile volume slider plus multi-function button, and a complete accessory kit in a gift-ready box.
• Holiper Dual Driver — biggest trade-off: it is a general-purpose sport earphone, not a monitor. Single 10 mm dynamic driver, plastic shells, fixed cable — no detachable upgrade path and less of a "reference" listening tool.
• Who each is for: BASN for singers, drummers, mixing engineers and anyone who wants isolation plus a cable they can replace. Holiper for runners, gamers and commuters who want cheap, light, grab-and-go earphones with on-cable controls.
The BASN Bsinger BC100 is built around one idea: stay in your ears, and keep the outside world out. The shells are molded to follow the shape of the ear canal, and the memory wire earhook bends to your ear and holds that shape, so the fit is meant to survive movement on stage rather than just sitting still at a desk. BASN describes the fit as the result of studying ear canals, and the practical upshot is a rounded-tip, in-ear design that behaves closer to a custom monitor than a generic earbud.
Sound-wise the sheet lists a dual dynamic micro driver with a PET and copper diaphragm, an impedance of 18 ohm, and a 20 Hz – 20,000 Hz range. Low impedance like that means it does not demand much power — a phone, tablet or a monitoring pack will drive it. The sealed, ergonomic tips are rated to block up to roughly 20 dB of outside noise, which is exactly what you want when you are hearing your own voice or your own click track over a loud room.
The part that separates it from most earphones at this level is the cable. It is woven, it terminates in an MMCX connector, and it detaches. That means you can replace a worn cable instead of the whole earphone, or switch to a different MMCX cable for a different job. The connector is also compatible with a long list of other in-ear monitors, so cables can move between gear. In the box you get six pairs of silicone tips, a cable clip, a cleaning tool and a nylon carry case — the kind of kit that tells you this is meant to be maintained.
Holiper Dual Driver: Who It's For
The Holiper Dual Driver is the opposite philosophy. It is light — the sheet lists 13 g — and it is shaped as an ear-hook, so the cable routes up and over the ear rather than hanging straight down. That is the classic sport fit: it keeps the cable out of the way and helps the buds stay put when you are running, lifting or moving around. The enclosure is plastic, the color is black, and the style is described as sporty and minimalist, with the theme listed as video game.
Inside is a single 10 mm dynamic driver with a 16 ohm impedance and the same 20 Hz – 20,000 Hz range as the BASN. The low impedance and the "extra bass" positioning suggest it is tuned for a fuller low end and easy driving from a phone or a controller. Noise isolation is listed as sound isolation — the in-ear seal does the work, but there is no dB figure quoted, so treat it as ordinary passive isolation rather than lab-grade blocking.
The controls are the selling point. There is a tactile volume slider and a multi-function button on the cable, so you can nudge volume and take calls without pulling your phone out. The cable is braided, 1.2 m, tangle-free, and ends in a gold-plated 3.5 mm plug. It is a fixed cable — no MMCX, no replacement path — which is the honest trade-off for the simplicity.
Accessories are generous for the category: extra eartips, a leather-like pouch and a cable clip, all in a gift-ready box. Holiper also states a one-year warranty with a complimentary replacement if the item malfunctions within that year.
Who should buy it: runners, gym-goers, gamers, students and commuters who want lightweight wired earphones with on-cable controls and a pouch to keep them in. Who should skip it: if you need a detachable cable, a genuinely sealed monitoring fit, or a reference-flat sound for mixing, this is not that tool.
Side-by-Side: Which Should You Choose?
• Best for noise isolation → BASN Bsinger BC100. The spec sheet quotes up to about 20 dB of blocking; the Holiper sheet lists isolation without a figure.
• Best for running and sport → Holiper Dual Driver. Ear-hook shape, 13 g weight and a tangle-free braided cable are made for movement.
• Best for cable longevity and upgrades → BASN Bsinger BC100. The MMCX connector lets you swap or replace the cable; the Holiper cable is fixed.
• Best for on-cable controls → Holiper Dual Driver. Volume slider plus multi-function button; the BASN relies on the connected device.
• Best for low-impedance, easy-to-drive listening → a tie. 18 ohm (BASN) and 16 ohm (Holiper) both run happily off a phone.
• Best for a spare-parts kit out of the box → BASN Bsinger BC100. Six pairs of tips, a clip, a cleaning tool and a nylon case.
• Best for a light, low-commitment everyday pair → Holiper Dual Driver. Pouch, extra tips, clip, and a gift-ready box.
If I had to pick one, I would buy the BASN Bsinger BC100. In my opinion the detachable MMCX cable is the single most useful feature here — it turns a consumable into something you can keep, and the molded, sealed fit plus memory earhooks are the right design for anyone who actually performs or mixes. The Holiper Dual Driver is a genuinely sensible buy if your priority is lightweight sport use and inline controls, and I would recommend it for runners and gamers without hesitation. But for isolation, fit security and a long service life, the BASN is the one I would reach for. Check the current price on Amazon before deciding, since both are wired earphones and the gap between them is small.
FAQ
No. The BASN Bsinger BC100 uses an MMCX connector, so the woven cable detaches and can be replaced or upgraded. The Holiper Dual Driver has a fixed 1.2 m braided cable with a gold-plated 3.5 mm plug.
The BASN sheet states the ergonomic tips and seal block up to about 20 dB. The Holiper lists sound isolation but gives no figure. On paper, the BASN is the more isolating design — though a good seal with the right tips matters most on either.
Both are easy. The BASN is rated 18 ohm and the Holiper 16 ohm, and both cover 20 Hz – 20,000 Hz, so a phone, tablet or controller will drive either without extra gear. The BASN has a dual dynamic driver setup; the Holiper uses a single 10 mm dynamic driver.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Holiper Dual Driver vs Linsoul Tripowin Nova 2M, Audiovance Vibes 202MC vs Generic Dual Fold, SOULWIT 40mm vs Joso Headset: 40mm Driver Headphones