ICU Beds

ICU Bed Motorised With Battery Backup

Technical Specifications:

• Major Features Include: Backrest, Knee rest, Height Adjustment, Trendelenburg/Reverse Trendelenburg, Cardiac Chair Position, Neuro Position, Zero Level Position maneuverable by four separate liner actuators which are operated through Patient Control Unit and Nurse Control Unit.

• Back rest 0-75°

• Knee rest 0-35°

• Minimum Height 550mm

• Maximum Height 750mm

• Trendelenburg / Reverse Trendelenburg 0-12°

• Dual Side Liver for Manual CPR

• Frame size: L 2060mm x W 900mm

• Overall Dimensions: L 2120mm x W 1080mm

• Epoxy coated mild steel structure with 4 section mattress platform made up of CRCA Sheet.

• Detachable Polymer moulded Head and foot bows giving a soothing look.

• 4 sectional polymer moulded safety side rails with separate angle indicators.

• Corner PU buffers to absorb impact and reduce damage during handling.

• Twin wheel heavy duty Central Locking Castors of 125mm Dia for smooth mobility with control.

• Heavy duty IV Pole with provision for fixing it at all four locations.

• Dust Protective Fibre Base cover

• Battery Back Up

Optional Accessories:

• Mattress

• X-ray permeable backrest

ICU Bed 5 Function

Technical Specifications:

• Major Features Include: Backrest, Knee rest, Height Adjustment, Trendelenburg/Reverse Trendelenburg positions maneuverable by four separate liner actuators which are operated by Remote.

• Back rest: 0-75°

• Knee rest: 0-35°

• Minimum Height: 450mm

• Maximum Height: 750mm

• Trendelenburg/Reverse Trendelenburg: 0-12°

• Dual Side Liver for Manual CPR

• Frame size: L 2060mm x W 900mm

• Overall Dimensions: L 2160mm x W 1020mm

• Epoxy coated mild steel structure with 4 section mattress platform made up of CRCA sheet

• Detachable Polymer molded Head and foot bows giving a soothing look.

• 4 sectional polymer molded safety side rails with separate angle indicators.

• Corner PU buffers to absorb impact and reduce damage during handling

• Single wheel heavy duty Diagonal Locking Castors of 125mm Dia for smooth mobility with control.

• Heavy duty IV Pole with provision for fixing it at all four locations.

Optional Accessories:

• Mattress

• X-ray permeable backrest

Dialysis Chair Cum Bed

Technical Specifications:

• Frame work made up of CRCA sheets and CRCA Tubes

• Major Features Include: Backrest, Egress, Height Adjustment, Trendelenburg/Reverse Trendelenburg, positions maneuverable by four separate liner actuators which are operated by Remote.

• Back rest: 0-75°

• Knee rest: 0-35°

• Minimum Height: 450mm

• Maximum Height: 750mm

• Trendelenburg/Reverse Trendelenburg: 0-12°

• Dual Side Liver for Manual CPR

• Frame size: L 1900 mm x W 900 mm

• The leg rest can decline downwards at 90º which is helpful to initiate the standing position of patient.

• The Bed Fully reclines to the horizontal position.

• Egress position to easily lift up the patient.

• 2 polymer molded safety side rails with angle indicators

• Detachable Polymer molded Head and foot bows giving a soothing look.

• Corner PU buffers to absorb impact and reduce damage during handling.

• Single wheel heavy duty Diagonal Locking Castors of 125mm Dia for smooth mobility with control.

• Heavy duty IV Pole with provision for fixing it at all four locations.

Optional Accessories:

• Mattress

• X-ray permeable backrest

ICU Bed, Electric, 7 Function (With X-Ray Permeable Backrest)

Standard Features:

• ICU Bed (7 function) with electrically operated back rest tilting 0-70°, knee rest tilting 0-30°, trendelenburg tilting 0-12°, Reverse trendelenburg tilting 0-12°, mattress base ( lateral ) tilting to the left up to 15°, tilting to the right up to 15°

• Outer dimensions L2240*W1060mm (±10mm)(Side rails up), Mattress platform L1965*W920mm (±10mm), Bed Height H530-930mm (±10mm), Bed extension 200mm (±10mm). All function controlled with TiMotion motor.

• Split Guard rails: Guard rail PP- 4pcs provides protection to patient and additional side rails- 2 pcs near foot board offers more safety and support to patient while standing.

• Angle Gauge on Side rails display's the angle of back rest, Lateral tilt and Trendelenburg / Reverse Trendelenburg.

• Integrated Scale control panel: It is located at foot end and is protected against impacts .

• Removable mattress platform: PP Plastic board mattress platform can be easily removed for sterilization.

• With X-ray permeable PF backrest, Central nurse control system, 150mm noiseless castor with central locking.

• Embedded controls on both sides of guard rails, Linen shelf : At the bottom of foot end

• H/F boards locks: The board locks prevent accidental removal of the bed boards when steering or handing the bed

• X-ray cassette holder: Sliding construction allows the cassette to be inserted beneath the mattress platform from the side of the bed.

• Manual/Electric CPR: The Electric CPR operates with one key control. Manual CPR is equipped with damping device, which can be used single handedly and allows the back rest fall slowly to ensure the safety of the patient, in case of power failure.

Electric Parameters:

• Power supply : 220V/110V, 50HZ / 60HZ

• Maximum input : 1.6A, 450VA

• Protection against water and dust : IPX4

• Equipment security classification : Class II

• Level of protection against injury from electrical current : Applied part type BF

• Electric motor operation mode (load factor) : 10%, max. 2 min/18 min

Basic Features 

• Function  : Seven 

• Outer dimensions(Side rails up) : L2240*W1060mm (±10mm) 

• Mattress platform  : L1965*W920mm (±10mm) 

• Bed Height : H530-930mm (±10mm) 

• Bed extension : 200mm (±10mm) 

• Maximum backrest angle : >70° 

• Maximum thigh rest : >30°

• TR/ATR :  >12°

• Left and right tilt : >15° 

• Height of side rails (above mattress platform) : 440mm (±10mm) 

• Safe working load : 200kgs 

• Weighing system : Yes

ICU Bed Electric, 3 Function 

Standard Features:

• ICU Bed 3 function with electrically operated remote controlled back rest:0-70±5°, knee rest:0-35±5°

• Size: L 2220mm × W 1060mm × H 440 - 760mm (Height Adjustable).

• All functions controlled with TiMOTION Motor, 220 - 240 V AC, 50 Hz. (110 V on request)

• HDPE removable & interchangeable Head and foot panel.

• Four easy lifting guardrails on each side, which are safe and reliable, and can be fixed upward and downward.

• Angle Gauge on Side rails display the angle of back rest and knees rest.

• Protective corner bumpers

• Epoxy coated mild steel frame work and 4 section perforated top.

• CPR position button for bed to reach “Zero” position quickly, with battery backup.

• 125mm dia noiseless castors with Central braking system.

• ABS Drainage hooks 2 each on both sides, Provision for I.V. Rod -4 (Corners).

ICU Bed Electric, 2 Function

Standard Features:

• ICU Bed with electrically operated remote controlled Knee up 35°, back rest 70°

• Size: L 2180mm × W 1060mm × H 500mm

• All functions controlled with TiMOTION Motor from Taiwan Power Device (Actuator), 220 - 240 V AC, 50 Hz. (110 V on request).

• HDPE removable & interchangeable Head and foot panel.

• Four easy lifting guardrails on each side, which are safe and reliable, and can be fixed upward and downward.

• Angle Gauge on Side rails display the angle of back rest and knees rest.

• Protective corner bumpers

• Epoxy coated mild steel frame work and 4 section perforated top.

• 125mm dia noiseless castors with Central braking system.

• ABS Drainage hooks 2 each on both sides, Provision for I.V. Rod -4 (Corners).

ICU Bed Manual 3 Function

Standard Features:

• ICU Bed (3 function) with manually operated back rest 0-70°, knee rest 0-25°

• Size: L 2180mm ×W1060mm × H 500-705mm (Adjustable Height).

• Loading capacity : 200 kg

• HDPE removable & interchangeable Head and foot panel.

• Collapsible Aluminium side railings.

• Protective corner bumpers

• Epoxy coated mild steel frame work and 4 section perforated top.

• 125mm dia noiseless castors with Central braking system.

• Steel Drainage hooks 1 each on both sides, Provision for I.V. Rod -4 (Corners).