We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-17 · 7 min read · Independent comparison
If you want to turn your existing wired-quality Bluetooth headphones into a low-latency console audio setup, choose Avantree DG80; if you need a complete wireless earbud kit with its own mic, dongle and charging case, choose RYR Gaming Earbuds. These two products solve completely different problems, and once you see that, the decision gets easy.
• Avantree DG80 — biggest strength: a plug-and-play USB transmitter that streams high-definition aptX audio from a console to Bluetooth headphones you already own, with latency as low as 55ms and range up to 100ft / 30m.
• Avantree DG80 — biggest trade-off: it's just a dongle. No headphones, no mic of its own, and it only hits that low latency if your headphones support aptX-LL or aptX-Adaptive. It also won't work with the Sony PULSE 3D or other 2.4G headsets.
• RYR Gaming Earbuds — biggest strength: a full earbud package with 2.4G and Bluetooth dual connection, sub-20ms latency, dual noise-reducing mics, a 36-hour charging case and an LED battery display.
• RYR Gaming Earbuds — biggest trade-off: you're locked into the included earbuds and their in-ear fit, and the package includes a USB-C dongle plus a C-to-A adapter rather than a native USB-A dongle.
• Who the Avantree DG80 is for: someone who already loves their over-ear Bluetooth headphones and wants wireless console audio without buying new cans.
• Who the RYR Gaming Earbuds are for: someone who wants one self-contained kit for VR, handhelds, PC and phone, and prefers in-ear buds over a headband.
The DG80 is a tiny black transmitter — roughly an inch long and 10 grams — that plugs into your console's USB-A port and does exactly one job: send audio to Bluetooth headphones. No drivers, no software, no setup screens. Pair your headphones once, set the DG80 as the sound output in your console's menu, and you're done. On repeat sessions the headphones reconnect automatically.
Where it earns its keep is the audio quality side. It uses a Qualcomm chipset supporting aptX-LL, aptX-HD and aptX-Adaptive, and transmits 24-bit audio over a stable, energy-efficient connection. Reach is generous at up to 100ft / 30m, so you can walk to the kitchen mid-loadout without the audio cutting out. The latency story is the important caveat: you get 55ms or less only when your headphones support aptX-Low Latency or aptX-Adaptive. With plain SBC headphones you'll get delay, and that's the number one thing to check before buying.
Buy it if you already own a solid pair of Bluetooth headphones or earbuds with aptX-LL or aptX-Adaptive, and you want to use them on PS5 or PS4 without cables. Skip it if you need a microphone of your own — the DG80 transmits audio only, can't drive mice, keyboards or controllers, and Avantree itself suggests setting the input device to "Microphone on Controller" because using your headphone's mic degrades background audio. Also skip it if you're planning to use a PULSE 3D headset, since it isn't compatible. And if your main target is a PC rather than a console, Avantree points buyers toward its C81 line instead.
The RYR Neo100 is the opposite approach: instead of adapting hardware you own, it hands you the whole audio chain. You get in-ear buds in pink with 12mm dynamic drivers, a 500mAh charging case with dual LED battery readouts, a 2.4G transmitter, a C-to-A adapter, a charging cable and extra eartips. It's a kit, not an accessory.
The headline feature is latency: the 2.4G dongle delivers sub-20ms audio, which is the kind of sync you want in VR, FPS and racing games where a visible audio lag ruins the feel. The dual-connection design is the genuinely clever part — the buds can hold a Bluetooth link to your phone and a 2.4G link to your console or handheld at the same time, so a call can come in without you pausing your game. Platforms covered include Meta Quest 3 and 2, PS5, PS4, Switch, Steam Deck, PC and phones.
Battery life is the other big draw: up to 36 hours total playtime with about 3.5 extra charges in the case, and the LED display shows levels for both the buds and the case so you're not guessing. The dual built-in mics with noise reduction handle in-game chat and calls. Touch controls cover volume, calls and track skipping, and IPX4 with a nano-coating means sweat and splashes during VR workouts aren't a problem. Bluetooth range is listed at 50 feet.
Buy these if you want one product that works across VR, console, handheld and phone, and you're happy with in-ear buds. Skip them if you strongly prefer over-ear headphones, if you need native USB-A on the transmitter without an adapter, or if you want to keep using the headphones you already own — this kit replaces them rather than upgrading them.
• Best for keeping your current headphones → Avantree DG80. It's the only one of the two that adds wireless audio to hardware you already like.
• Best for lowest latency → RYR Gaming Earbuds. Sub-20ms via the 2.4G dongle beats the DG80's 55ms-or-less figure, which also depends on your headphones supporting aptX-LL or aptX-Adaptive.
• Best for battery life → RYR Gaming Earbuds. Up to 36 hours total with the LED-displayed charging case versus a dongle that draws a small 4.2Wh battery of its own.
• Best for wireless range → Avantree DG80. Up to 100ft / 30m versus 50 feet of Bluetooth range on the RYR buds.
• Best for built-in voice chat → RYR Gaming Earbuds. Dual noise-reducing mics on the buds; the DG80 has no mic and relies on your headphone or controller mic.
• Best for VR and handheld gaming → RYR Gaming Earbuds. Built for Meta Quest 3/2, Steam Deck and Switch with the 2.4G dongle.
• Best for console-only audio upgrades → Avantree DG80. Plug into PS5 or PS4's USB-A port and pair your headphones; no dongle-to-adapter juggling.
• Best for people who dislike in-ear buds → Avantree DG80. It lets you use over-ear headphones, which the RYR kit doesn't.
In my opinion, the RYR Gaming Earbuds are the better single purchase for most gamers in 2026, because they solve the whole problem in one box: sub-20ms latency, a real mic, a 36-hour case with visible battery levels, and dual 2.4G-plus-Bluetooth connection across VR, consoles, handhelds and phones. The Avantree DG80 is the smarter buy only if you already own good aptX-LL or aptX-Adaptive headphones and simply want them untethered from your PS5. If you're starting from nothing, I'd take the RYR kit; if you're upgrading a headphone you love, I'd take the DG80. Either way, check the current price on Amazon before deciding, since that's the one variable that can flip this call.
Both work on PS5, but differently. The DG80 sends audio wirelessly to your own Bluetooth headphones via USB-A. The RYR buds connect through their 2.4G dongle with sub-20ms latency and include their own mic, which the DG80 does not.
Yes. The dual-connection design lets the buds hold a Bluetooth link and a 2.4G link at once, so you can take a call on your phone without pausing gameplay on your PC or console.
No. You only get 55ms or less if your headphones support aptX-Low Latency or aptX-Adaptive. With standard codecs like SBC you'll notice delay, so check your headphone's codec support first.
Up to 36 hours of total playtime, with the 500mAh case providing roughly 3.5 extra charges. The dual LED display shows the battery level for both the buds and the case.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.