Why buy this product?

If you discover rust on any iron or steel object you can use a rust converter to restore the material and have it ready for painting. Rust Converter is a water based product that converts rust into a stable form of iron tannate that can be worked with as you would new metal prior to repainting. The overall chemical reaction converts rust into a stable, black protective polymeric coating that serves as an excellent primer for both oil and epoxy based paints.

How to use?

• Good surface preparation will enable the Rust Converter to work effectively and leads to a high quality end result. You will want to remove large rust and scale particles with a stiff bristled brush, hammer or sandpaper (the point is not to remove all of the rust, this is counterintuitive to a good result as you need the rust to restore the surface)

• Saturate the area with water and allow to penetrate - clean and degrease the surface then allow to dry

• Apply Rust Converter with a brush/roller/spray

• The Rust Converter will then penetrate to the base and convert outwards

• As the rust is not being scrapped but being turned into useful metal it will degrade slower than if the rust was removed them the base treated/primed

• No need to topcoat immediately after use as the Rust Converter will protect it for some time before painting

• Use oil based or epoxy paints to paint over Rust Converter, do not use Latex or water based paints

• Once it’s been exposed and used, it should not be returned to the bottle with any unused liquid