How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want an old-school wired in-ear with a big dynamic driver, aluminum housing and zero charging anxiety, choose Audio Technica ATH-CM707; if you need true wireless freedom, adaptive hybrid noise cancelling, multipoint Bluetooth and app-tuned sound, choose SoundPEATS H3.
• Audio Technica ATH-CM707 — biggest strength: a wired 3.5mm connection with a large 15.4mm dynamic driver, a resonance duct for low-end weight, and a lightweight shaved-aluminum housing with an elastomer bushing and crank treatment for a stable, comfortable fit.
• Audio Technica ATH-CM707 — biggest trade-off: it's a wired set with a 0.6m cord plus a 0.6m extension, no active noise cancelling and no app, so you trade modern convenience for plug-and-play simplicity.
• SoundPEATS H3 — biggest strength: a triple-driver wireless design (12mm dynamic plus dual balanced armatures) with up to 55dB adaptive hybrid ANC, LDAC and aptX Lossless support, 6-mic AI call clarity and 37 hours of total battery with the case.
• SoundPEATS H3 — biggest trade-off: it depends on a charging case and app-based setup, and you're relying on Bluetooth rather than a direct wired signal.
• Pick the ATH-CM707 if you want a no-fuss wired pair for a phone, laptop or DAP with a headphone jack and you prefer a single, fixed tuning.
• Pick the H3 if you want wireless convenience, noise cancelling on commutes, clear calls and EQ control from your phone.
The ATH-CM707 is a classic wired in-ear built around a newly developed 15.4mm dynamic driver. That's a large driver for an in-ear, and Audio-Technica pairs it with a resonance duct structure designed to add body to the low end and allow powerful bass playback. In practice, that points to a warm, full presentation with a focus on mid-range resolution — the kind of tuning that suits vocals, acoustic tracks and everyday listening rather than a flat studio reference.
The physical design is where this pair earns its keep. The housing is made from shaved aluminum alloy, which keeps it light (the unit itself is listed at just 6g), and the bushing uses a highly elastic elastomer material with a crank treatment. Translation: the earphone is meant to sit still in your ear and not shift around while you move. The cord is tangle-free and splits into a 0.6m length plus a 0.6m extension, so you can run it short at a desk or extend it to reach a laptop or a player in a pocket. It ships with ear pads, an extension cord and a leatherette pouch with a divider.
Who should buy it? Someone with a 3.5mm jack who wants a fixed, dependable wired setup — a phone or laptop user, a commuter who doesn't want to manage batteries, or anyone who simply prefers the reliability of a cable. Who should skip it? If you want active noise cancelling, wireless freedom or the ability to tweak the sound from an app, this isn't that product. It's a single-purpose wired earphone, and it does that one job without software or charging.
The H3 is the modern wireless counterpoint, and it's packed. It uses a hybrid triple-driver setup — a 12mm dynamic driver plus dual balanced armatures — which is the classic recipe for strong bass from the dynamic unit and detailed mids and treble from the armatures. SoundPEATS pairs that with LDAC, aptX Lossless and Snapdragon Sound support at bitrates up to 1.2Mbps, along with Hi-Res certification, so the wireless link is built to carry high-resolution audio rather than compress it away. The frequency range spans 20Hz to 40kHz.
The headline feature is noise cancelling: up to 55dB adaptive hybrid ANC with six microphones, claimed to cut up to 99.8% of ambient noise across a 4000Hz range, with indoor, outdoor, transport and adaptive modes selectable in the app. For calls, a 6-mic system plus Qualcomm CVC 8.0 and an L-shaped acoustic tube work to reduce wind, echo and background chatter. Battery is listed at up to 7 hours per charge and 37 hours total with the case, and a 10-minute top-up gives 2 hours of playback. Bluetooth 5.4 with multipoint lets you stay connected to two devices at once, and the PeatsAudio app handles EQ, custom touch controls, a fit test and a real-time battery display. It's IPX5 water resistant and carries a one-year warranty.
Who should buy it? Commuters, travelers, gym-goers, remote workers on calls, and anyone who wants one pair to handle music, meetings and everything between. Who should skip it? If you hate managing a charging case, dislike touch controls, or want a pure wired signal with no app involved, the H3's whole value proposition is the opposite of what you're after.
• Best for wired reliability → Audio Technica ATH-CM707. A 3.5mm jack, no battery, no pairing, no app.
• Best for noise cancelling → SoundPEATS H3. Up to 55dB adaptive hybrid ANC across four modes.
• Best for battery life → SoundPEATS H3. Up to 37 hours total with the case, plus 10 minutes for 2 hours.
• Best for call clarity → SoundPEATS H3. Six mics, Qualcomm CVC 8.0 and an L-shaped acoustic tube.
• Best for a simple, stable fit → Audio Technica ATH-CM707. Lightweight aluminum housing, elastomer bushing and crank treatment designed to stop the earphone shifting.
• Best for sound customization → SoundPEATS H3. App EQ, touch control remapping and a fit test.
• Best for high-resolution wireless audio → SoundPEATS H3. LDAC, aptX Lossless and Snapdragon Sound with Hi-Res certification.
• Best for plug-and-play on a laptop or DAP → Audio Technica ATH-CM707. The 0.6m cord plus 0.6m extension covers desk and pocket use without charging.
If I had to pick one, I'd buy the SoundPEATS H3 for most people. It covers far more ground: noise cancelling for commutes, six mics for calls, multipoint for juggling a laptop and phone, app EQ to tune the sound, and 37 hours of total battery. The triple-driver setup with LDAC and aptX Lossless support means the audio side isn't an afterthought either. That said, I'd choose the Audio Technica ATH-CM707 in a heartbeat if you want a wired set that never needs charging, sits securely thanks to its aluminum housing and elastomer bushing, and just works the moment you plug it in. Two different jobs, two genuinely good answers — check the current price on Amazon for both and let your own use case decide.
No. It's a wired in-ear with a 3.5mm connection, a 0.6m cord and a 0.6m extension. There's no Bluetooth audio — the wireless technology field is listed simply as Bluetooth, but the actual connection method is wired.
Yes. It offers up to 55dB adaptive hybrid ANC with six microphones and four modes — indoor, outdoor, transport and adaptive — selectable through the PeatsAudio app.
The SoundPEATS H3, by a wide margin in practical terms. It's rated up to 7 hours per charge and 37 hours total with the case, with a 10-minute quick charge giving 2 hours. The ATH-CM707 has no battery at all since it's wired.
Yes. It supports multipoint connection over Bluetooth 5.4, so you can stay linked to two devices at the same time, and the app shows a real-time battery display.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.