With the trust of Netgear and easy installment of the Arlo wire-free camera. Arlo is the number one choice of people in schools, offices, homes, businesses. Arlo support is also the reason behind Arlo’s success, with 24/7 Arlo Netgear Support Arlo provides the best customer support.
To experience supreme security and best experience discover the full range of Arlo and visit Arlo Support . Now, let's start with the Arlo base station installment as the base station is the key to the Arlo system and every device needs to be connected to it.
To set up the Arlo wire-free camera follow the steps below:
Insert the batteries in the camera.
Check whether the polarity of the batteries is right.
Download the Arlo app or open the web browser, then log in to my.arlo.com
Start the Arlo app on your mobile phone or computer.
Then create your Arlo account for safe and easy handling of the camera.
Tap on the NEW SYSTEM SETUP.
Choose the Arlo Base Station.
Then wait till the Arlo app automatically discovers the Arlo base station.
Now, follow the steps given on the Arlo app screen, then fill in the details to finish the Arlo account Arlo setup.
Always connect one camera at a time and repeat the steps given above to set up each camera individually.
For any Arlo tech support call Arlo Support Phone Number.
To sync the Arlo wire-free camera to the base station or SmartHub follow the steps below:
Press the sync button at the bottom of the Arlo base station for about 2 seconds.
Then release the sync button.
Place the Arlo base station near the Arlo wire-free camera for Arlo Sync.
Note: the distance should be between 1 – 3 feet which is 30 – 100 in centimeters.
Wait for the sync LED status to light green on Arlo Base Station.
Press the sync button at the bottom of the Arlo base station for about 2 seconds.
Then release the sync button.
Wait for the Arlo wire-free camera LED to flash rapidly in blue color, which indicates the successful sync of the Arlo camera to the base station.
Make sure to connect every camera separately and repeat the steps again for each camera.
Then you may notice that the Power LED of the base station starts flashing after the sync this is because the Arlo firmware update is in progress, so no need to worry. The Arlo wire-free camera will reboot and will start streaming.
If the sync process fails and takes longer than 60 seconds, then try to resync the Arlo base station to the Arlo wire-free camera and press the sync button again. Repeat the instructions again. If still the camera shows issues in sync then reach for Arlo camera support or you can call on Arlo support phone number, where our expert team is happy to help you.
Thus, the Arlo setup and sync are easy steps but need little help. To know more about your Arlo device visit our website at Arlo Netgear support. However, always remember to make sure the battery you are using in your Arlo camera is genius and charged. Never stop the installation process in between by removing the camera battery or switching off the power of the base station. The Arlo camera should be in the range of the Arlo base station if you want to experience the best live video streaming. Wish the article is of great help to you.