How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-20 · 7 min read · Independent comparison
• APETOO 3.5mm biggest strength: a complete, self-contained listening kit — TRRS 3.5mm plug, in-line mic and volume buttons, silicone tips, spare tips and a storage case. Nothing else is required.
• APETOO 3.5mm biggest trade-off: it is wired and deliberately half-in-ear, so it does not seal off the world and it needs a real 3.5mm port.
• Weatwo RJ9 biggest strength: it turns a professional-grade RJ9 headset you already own into something your computer can actually use, with no drivers or software to install.
• Weatwo RJ9 biggest trade-off: it is an adapter cable only. It makes no sound by itself, and its compatibility list is narrow and specific.
• Choose APETOO 3.5mm if you want earbuds for music, video, calls and gaming on a phone, tablet, laptop or console.
• Choose Weatwo RJ9 if you already own a compatible U10P RJ9 headset and want it working on a PC or Mac.
The APETOO 3.5mm is a wired in-ear headphone built around a single, well-understood idea: plug it in and it works. The connector is a TRRS 3.5mm jack — the four-pole type that carries both audio and microphone — made from anti-oxidant metal, which the spec sheet says gives better contact than a generic plug. Inside there is a dynamic driver with a 32-ohm impedance and a 20 Hz to 20,000 Hz frequency range, which is the standard full-range window for consumer audio. Nothing exotic. Just a sensible, low-fuss listening tool.
The design details are where this pair earns its place. It is a half-in-ear bud shape with silicone tips, which means it sits at the entrance of your ear rather than plugging it. That matters more than people expect: you keep some awareness of the room around you, so you can hear a teacher, a colleague or traffic while your audio keeps playing. For students, commuters and anyone working in a shared space, that is a feature, not a compromise. The body is lightweight ABS, the whole thing weighs 25 g, and the cable uses anti-wrap oxygen-free copper so it survives being shoved into a backpack.
The controls are on an in-line remote: a built-in HD microphone plus volume buttons, so you can answer a call or adjust playback without touching your phone. Note the layout — the microphone sits on the right side, which is worth knowing before you start hunting for it mid-call. In the box you get the earbuds, a mini storage case and two extra pairs of silicone ear tips, which is a genuinely useful inclusion because tip fit is the single biggest factor in how these feel after an hour.
Who should buy it? Anyone whose devices still have a 3.5mm port — MacBook, laptop, desktop, tablet, phone, handheld console, MP3 player — and who wants a white, lightweight pair that lives in a bag and never needs charging. It also suits teens and school use, which is the age range the manufacturer states. Who should skip it? If you want active noise cancellation, a fully sealed in-ear fit, or wireless freedom, this is not that product. And if your device has no 3.5mm jack at all, you would need an adapter, which is a separate purchase.
The Weatwo RJ9 is not a headset. It is a 57.5 cm (1.9 ft) adapter cable that goes from a USB-A male plug to an RJ9 female socket, and its entire job is to let a wired RJ9 headset talk to a computer. If you have ever stared at the curly cable of an office headset and wondered how to get it into a laptop that only has USB, this is the answer.
The important part is the compatibility list, and it is deliberately narrow. Weatwo states the adapter works with U10P RJ9 plug headsets — the standard used by Plantronics models including the CS50, CS55, CS351n, CS361n, CS70n, CS540n, CS540, CS530, CS510, CS520, C054 and C052, Jabra's Pro 920, GN9125 and GN9120, and the Sennheiser D10 wireless headset. It supports both wired U10P headsets and the base units of those wireless DECT systems. It does not work with every RJ9 headset, and the manufacturer says so plainly. If your model is not on that list, check the U10P compatibility of your headset before ordering.
Build-wise, it is a simple black cable: PVC jacket, high-purity copper conductors inside, safe insulation and enough toughness to survive being coiled into a laptop bag every day. There is no plug or power brick, and it weighs 20 g. There is nothing to install — no drivers, no software. You plug the USB-A end into your computer, laptop, PC, Mac or tablet, plug the RJ9 end into the headset or its base, and then set the adapter as the default input and output device in your operating system and your calling application. That last step is the one people miss, and it is the difference between "it doesn't work" and a clean call.
Side-by-Side: Which Should You Choose?
• Best for listening to music and video → APETOO 3.5mm. It is a complete audio product with drivers, tips and a full-range 20 Hz–20 kHz response.
• Best for using an existing office headset on a PC → Weatwo RJ9. It converts USB-A to RJ9 and nothing else.
• Best for calls in a quiet room → APETOO 3.5mm. The in-line mic and volume remote handle phone and video calls without reaching for your device.
• Best for long calls in a noisy office → Weatwo RJ9. A boom-mic RJ9 headset paired through this adapter gives you the mic placement and comfort a full headset is designed for.
• Best for travel and portability → APETOO 3.5mm. At 25 g with a storage case, it disappears into a pocket; the Weatwo cable is a desk accessory.
• Best for situational awareness → APETOO 3.5mm. Its half-in-ear shape deliberately does not block outside noise.
• Best for plug-and-forget setup → APETOO 3.5mm. No device settings to change; the Weatwo needs to be set as your default input and output.
• Best for extending the life of gear you already own → Weatwo RJ9. It rescues a headset instead of replacing it.
In my opinion, the APETOO 3.5mm is the one I would buy for most people, because it is a finished product: it makes sound, takes calls, comes with spare tips and a case, and works the moment you plug it in. The Weatwo RJ9 is excellent at a much narrower job — if you already own a compatible Plantronics, Jabra or Sennheiser U10P headset and need it on a computer, this adapter is the smarter, tidier move and I would pick it without hesitation. Buy the APETOO for listening; buy the Weatwo to connect an office headset. Different tools, different jobs. Before ordering either, check the current price on Amazon using the button on this page, and confirm your headset is on Weatwo's compatibility list or that your device has a 3.5mm jack.
It is only an adapter cable. It has no speakers or microphone of its own, so you must connect a compatible U10P RJ9 wired headset or the base of a supported wireless DECT headset for it to do anything.
No. Weatwo states it supports U10P RJ9 plug headsets, including specific Plantronics, Jabra and Sennheiser models, and explicitly warns it is not compatible with all RJ9 headsets. Check your model first.
Yes, if the device has a 3.5mm stereo jack. The TRRS plug carries both audio and microphone, so calls and playback work through one connection. Devices with no 3.5mm port need a separate adapter.
One is a listening device, the other is a connector. The APETOO 3.5mm produces sound for music, video, gaming and calls. The Weatwo RJ9 produces nothing — it just lets an existing professional headset plug into a USB-A computer port.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.