If you want low-latency gaming earbuds with broad console and headset compatibility for motorcycle-related gaming or downtime, choose Anker Soundcore VR P10; if you need dual wireless connections and adaptive noise cancellation, choose Goovis GE10.
For motorcycle use, neither product is described as a helmet headset, and neither data sheet confirms an IPX7 rating. The useful distinction is their supported wireless features: Anker emphasizes gaming compatibility and sub-30ms latency, while Goovis adds adaptive noise cancellation and a stated 100-meter Bluetooth range.
Anker Soundcore VR P10 vs Goovis GE10 at a Glance
• Anker Soundcore VR P10: Its strongest case is low-latency 2.4GHz audio, with latency stated as under 30ms. Its trade-off is that pass-through charging is specifically noted as compatible with Meta Quest 2 and may not work with other devices.
• Anker is for buyers who want named compatibility with Meta Quest 2, Steam Deck, consoles, PC, and Switch.
• Goovis is for buyers who value dual-mode wireless, automatic call handling, and the stated Bluetooth range.
• For either product, check the current price on Amazon before deciding; the feature differences matter more here than a price claim.
The VR P10 is a gaming-first pair of wireless earbuds. Its included USB-C dongle uses a 2.4GHz connection, and Anker specifies latency under 30ms. That makes the feature set particularly relevant when synchronized sound matters during VR or handheld gaming. The listed compatibility includes Meta Quest 2, Steam Deck, PICO 4, PS4, PS5, PC, and Switch, giving it a clearer platform story than the Goovis model.
Anker also supports a simultaneous phone Bluetooth connection while the earbuds are connected to Meta Quest 2 through the dongle. The stated use is answering calls without pausing gameplay. Battery life is listed as up to six hours per charge and up to 24 hours with the case. A 10-minute charge is said to provide 1.5 hours of play, and the dongle can pass charging through to a Meta Quest 2 while playing. That pass-through detail has an important limit: the sheet warns it may not work with devices other than Meta Quest 2.
The 11mm drivers and BassUp technology are aimed at game audio with a stronger bass emphasis. For someone comparing a with mic headset for motorcycle use, however, the supplied information does not specify microphone performance or confirm helmet compatibility. It also describes the earbuds as water-resistant, but provides no IP rating. I would not treat that as evidence of IPX7 waterproofing or assume the buds are designed for riding in wet weather.
How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-18 · 8 min read · Independent comparison
The GE10 combines 2.4GHz wireless and Bluetooth 5.3, and it can stay connected to a media device and a smartphone at the same time. Goovis says incoming calls automatically pause media and playback resumes afterward. That is a practical distinction for someone who wants to keep a phone connected while listening or gaming without manually switching connections.
For gaming, the 2.4GHz transmitter is described as ready to use after plugging it in, without a pairing step. Bluetooth devices use one-touch pairing. Those details suggest a straightforward setup, but the provided sheet does not give a numerical latency measurement or a compatibility list naming individual consoles and headsets. If your main concern is whether a specific device works, verify that connection before choosing it rather than assuming it supports every platform listed for Anker.
Goovis lists up to six hours of playback on a charge, with an additional 20 hours from the charging case. It also specifies adaptive noise cancellation, a 100-meter Bluetooth range, and 11mm dynamic drivers. Those features make the GE10 worth considering for listening where reducing surrounding sound matters, or where its stated wireless range is useful. The data does not explain how the noise cancellation performs in particular environments, though, and the range figure should not be treated as a guarantee in every setting.
The GE10 may come up in a search for bluetooth headphones for motorcycle use, but its sheet does not identify it as a motorcycle headset, list a waterproof rating, or provide microphone details. It is therefore not possible to confirm from the supplied specifications that it is suitable under a helmet or in rain.
Who should skip it: Skip the GE10 if you need named support for a particular gaming platform or a stated sub-30ms latency figure.
• Best for a stated low-latency figure → Anker Soundcore VR P10. Anker gives a specific under-30ms figure for its 2.4GHz wireless gaming connection; Goovis does not provide a number in the available details.
• Best for named gaming-platform compatibility → Anker Soundcore VR P10. Its sheet lists Meta Quest 2, Steam Deck, PICO 4, PS4, PS5, PC, and Switch.
• Best for automatic call handling while connected to two devices → Goovis GE10. It says incoming calls pause media and playback resumes afterward. Anker also supports simultaneous connections, but describes answering calls during Meta Quest 2 gameplay rather than automatic media pausing and resuming.
• Best for adaptive noise cancellation → Goovis GE10. That feature is specifically listed for the GE10; the VR P10’s noise-control field says none.
• Best for Meta Quest 2 pass-through charging → Anker Soundcore VR P10. Its dongle supports charging the headset while playing, with the stated compatibility caveat for other devices.
• Best for the larger stated case-playback total → Anker Soundcore VR P10. The listed total is up to 24 hours with the case, compared with up to six hours plus 20 additional hours for Goovis. Both sheets describe up to six hours on a single charge.
• Best when Bluetooth range is a deciding spec → Goovis GE10. It lists a 100-meter Bluetooth range; Anker does not provide a corresponding range figure.
• Best for a motorcycle-related purchase decision → neither is confirmed as a riding headset. Neither sheet supplies an IPX7 rating, helmet-fit details, or microphone specifications. Choose based on the documented gaming and wireless features, not an assumption that either is motorcycle-ready.
My Verdict
I would choose the Anker Soundcore VR P10 for its stated low latency and wider named gaming compatibility. Its simultaneous phone connection and Meta Quest 2 pass-through charging also make its gaming use case more specific.
Before ordering, start with the device you plan to connect. If it is a Meta Quest 2, Steam Deck, PS4, PS5, PC, Switch, or PICO 4, Anker’s compatibility list gives you concrete guidance. Goovis describes connection through a 2.4GHz transmitter and Bluetooth, but the supplied details do not identify the same set of platforms. Confirm that the transmitter and your intended device work together.
Think about which wireless behavior matters more. Anker’s stated sub-30ms latency is useful when game audio and on-screen action need to stay closely synchronized. Goovis does not publish a latency figure here, but offers adaptive noise cancellation and automatic pause-and-resume behavior for calls. Those are different priorities, not interchangeable claims.
Battery figures also need a little context. Both products list up to six hours of playback per charge. Their case totals are described differently: up to 24 hours for Anker and six hours plus an additional 20 hours for Goovis. Treat these as the manufacturers’ stated figures, not a guarantee for every listening pattern.
Finally, separate motorcycle search language from documented riding suitability. A person looking for a with mic headset for motorcycle may need confirmed microphone behavior, secure fit under a helmet, and weather protection. Those details are not established for either model in the supplied specifications. The VR P10’s water-resistant description does not give an IP rating, and Goovis provides no waterproof claim here. If these are must-haves, verify them before making either pair your riding choice.
Anker states that VR P10 latency is under 30ms over its 2.4GHz connection. The Goovis information describes low-latency 2.4GHz wireless but does not provide a numerical figure for comparison.
Both are listed for up to six hours of playback on a single charge. Anker states up to 24 hours with its case; Goovis states six hours plus an additional 20 hours from its case.
Are either of these IPX7 waterproof gaming headphones for motorcycle riding?
Both support simultaneous connections to a media device and a smartphone in the described use cases. Anker says you can answer calls while gaming on Meta Quest 2; Goovis says calls automatically pause media and playback resumes afterward. The supplied specifications do not provide microphone performance details.
• Back Bay Audio Runner vs DOOGEEEco Bone Conduction Headphones
• AWWNUIF Open Ear Headphones vs DUSONLAP Open Ear Earbuds
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.