We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-02 · 8 min read · Independent comparison
If you want a wired over-ear headset built around sound isolation and long-session comfort, choose Anivia Gaming Headset Noise; if you need pocketable in-ear earbuds with four eartip sizes and a hard-shell case for gaming on the move, choose HyperX Cloud Earbuds II.
• Anivia Gaming Headset Noise — biggest strength: Over-ear design with soft memory earmuffs and a retractable headband, plus 50mm drivers and a sound-isolation approach that physically blocks outside noise.
• Anivia Gaming Headset Noise — biggest trade-off: It's bulky, wired, and its mic only works on some of the platforms it supports (Switch and 3DS are audio-only).
• HyperX Cloud Earbuds II — biggest strength: In-ear fit with four eartip sizes, a low-profile 90° plug, and a hard-shell case — genuinely portable, and in-ears seal out noise by design.
• HyperX Cloud Earbuds II — biggest trade-off: Smaller 14mm drivers and no active noise control; the seal depends entirely on getting the right eartip.
• Who each pick is for: Anivia for desk and couch players who want an over-ear isolation headset; HyperX for commuters, handheld players, and anyone who wants earbuds in a case.
The Anivia Gaming Headset Noise is an over-ear, wired headset that leans hard into comfort and passive isolation. The specs tell a consistent story: 50mm dynamic drivers, a 20Hz–20KHz frequency range, 32-ohm impedance, and 115dB sensitivity. That combination is easy to drive from a standard 3.5mm jack, which is exactly what it uses — a 3.5mm 4-pin plug with a 1-to-2 splitter included in the box for PCs with separate headphone and mic jacks. No drivers needed, no charging, no pairing. You plug in and play.
The comfort story is the part I find most convincing on paper. The earmuffs are soft memory foam, the headband is retractable and adjustable, and the whole thing is described as super lightweight with a breathable ear pad. Anivia says the design was tested across hundreds of different head shapes, which is the kind of claim that matters for a product people wear for multi-hour sessions. The enclosure is plastic in a black-purple finish. If you play long ranked sessions, the absence of clamp pressure and heat buildup is the difference between finishing a session and ripping the headset off at hour two.
The noise story here is isolation, not cancellation. This headset uses sound isolation — the closed over-ear cups physically reduce what reaches your ears. It is not active noise cancelling, and the sheet says so plainly. In practice, that means it takes the edge off a fan, a nearby TV, or a roommate's conversation, but it won't erase a bus engine or a lawnmower. That's the trade-off you accept for a passive design: no batteries, no circuitry, nothing to fail.
The microphone is a high-sensitivity omnidirectional unit with -38dB sensitivity and 2.2kΩ impedance, and there's a flip switch to mute it when you want to be left alone. One thing to note: platform support is broad but uneven. It works with PC, PS4, Xbox One and Xbox Series controllers (with an adapter on older models), and Switch and 3DS — but on Switch and 3DS the mic doesn't function, only audio. Buy it for solo play, PC voice chat, and console sessions where you're on the controller's headphone jack.
Who should buy it: desk and couch gamers who want over-ear isolation, a boom mic, inline volume control, and all-day comfort without charging anything.
Who should skip it: anyone who needs portability, wireless freedom, or guaranteed mic support on Switch and 3DS.
The HyperX Cloud Earbuds II is a completely different animal: in-ear, wired, and built to travel. The headline spec is the 14mm dynamic driver — large for an earbud — paired with 65-ohm impedance, 105dB sensitivity, and a 20Hz–20KHz range. Note the higher impedance compared to the Anivia. In-ears at 65 ohms generally want a bit more output from your source, which is rarely a problem on a PC, Steam Deck, Switch, or a phone with a decent dongle, but it's worth knowing if you're plugging into something weak.
The fit system is the real selling point. HyperX ships four eartip sizes, from large down to extra small, with redesigned tips. That matters more than it sounds: in-ear isolation lives and dies on the seal. A proper seal is what gives you the passive noise blocking — the kind that muffles train noise, office chatter, and keyboard clatter. The data sheet lists noise control as "None," which is accurate in the active sense: there is no ANC here. What you get is the physical seal of a well-fitting eartip, which for many people is enough.
Portability is where this product clearly wins. It comes with a hard-shell carrying case in red, matching the red earbuds, and the cable uses a flat tangle-resistant design with a low-profile 90° plug — a genuinely thoughtful detail if you've ever had a straight plug snap in a pocket or a handheld's jack. There's a built-in mic and a multifunction button for calls and media control on supported devices. Compatibility covers PC, Steam Deck, Nintendo Switch, and mobile devices with a 3.5mm connection. It's 20 grams total. There's also a 2-year manufacturer warranty listed.
The honest trade-offs: no active noise cancelling, the mic is an inline unit rather than a boom, and the earbud form factor means you're trading some soundstage size for portability. If you want that over-ear immersion and a flip-to-mute boom mic, this isn't it.
Who should buy it: handheld and Switch players, commuters, students, and anyone who wants gaming audio that lives in a case in their bag.
Who should skip it: players who want a boom mic, over-ear isolation, or a headset they never have to reseat.
Side-by-Side: Which Should You Choose?
• Best for passive noise isolation → Anivia Gaming Headset Noise. Closed over-ear cups with sound isolation block more ambient noise than in-ears without a perfect seal.
• Best for fit flexibility → HyperX Cloud Earbuds II. Four eartip sizes (large to extra small) versus one fixed over-ear pad.
• Best for big-driver sound and desk immersion → Anivia Gaming Headset Noise. 50mm drivers versus 14mm.
• Best for multi-hour comfort on a PC → Anivia Gaming Headset Noise. Retractable headband, memory foam earmuffs, breathable pads, lightweight build.
• Best for easy drive from weak sources → Anivia Gaming Headset Noise. 32-ohm impedance is friendlier than the earbuds' 65 ohms.
• Best for voice chat with a boom mic → Anivia Gaming Headset Noise. Omnidirectional mic with flip-to-mute switch.
• Best for calls and media control on the move → HyperX Cloud Earbuds II. Built-in mic plus multifunction button.
• Best for Switch and handheld audio → HyperX Cloud Earbuds II. Full compatibility including Steam Deck, with no mic caveats listed.
• Best for plug-and-play simplicity → both. Neither needs drivers, apps, or charging.
In my opinion, if your gaming happens at a desk or on a couch and your priority is blocking out the room around you while staying comfortable for hours, I'd buy the Anivia Gaming Headset Noise. The over-ear isolation design, 50mm drivers, boom mic with mute, and adjustable headband line up with what most long-session players actually need.
If your gaming happens in a backpack, on a train, or on a Switch in handheld mode, I'd buy the HyperX Cloud Earbuds II instead. The four eartip sizes, hard-shell case, and low-profile plug solve real problems that over-ear headsets create when you leave the house. Check the current price on Amazon for both before you commit — that's the one thing specs can't tell you.
Noise isolation is passive noise reduction — the product physically blocks sound from reaching your ears, without electronics. The Anivia Gaming Headset Noise uses closed over-ear cups and memory foam earmuffs for this; the HyperX Cloud Earbuds II achieves it through an in-ear seal from its four eartip sizes. Neither uses batteries or active circuitry.
Active noise cancelling can help in loud rooms, but it adds circuitry, batteries, and often a faint hiss, and it can slightly color the sound. Neither product here uses ANC — the Anivia relies on over-ear sound isolation and the HyperX on an in-ear seal. For gaming, passive isolation is often the simpler, lower-latency-friendly choice.
I can't point to a single "best" — it depends on whether you want active cancellation or passive isolation, and on your platform. Between these two, the Anivia Gaming Headset Noise gives you over-ear isolation with 50mm drivers and a boom mic, while the HyperX Cloud Earbuds II gives you in-ear sealing in a portable format. Pick based on where and how you play, not on a label.
Yes, ANC gaming headsets exist, but neither of these two is one — the Anivia lists sound isolation and the HyperX lists no noise control. If you specifically want active cancellation, look for that term explicitly in the specs. If passive isolation is enough, both of these do the job in different form factors.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: iDIGMALL Trucker vs Yealink UH48, FiiO K11 vs ARTTI T10: Headphones for Audiophiles, Turtle Beach vs Krysenix 2.4: Headphones for Big Heads, Joysico Over Ear Earbuds vs Philips G3