Chao, J., Rementeria, R., Aranda, M., Capdevila, C., Gonzalez-Carrasco, J.L., 2016. Comparison of Ductile-to-Brittle Transition Behavior in Two Similar Ferritic Oxide Dispersion Strengthened Alloys. Materials 9, 637. https://doi.org/10.3390/ma9080637
Kumar, V., Kumar, D., 2017. Investigation of tensile behaviour of cryorolled and room temperature rolled 6082 Al alloy. Materials Science and Engineering: A 691, 211–217. https://doi.org/10.1016/j.msea.2017.03.051
Singh, B.K., Singh, R.J., Kumar, R., Baburajan, P.K., Rao, R.S., Gaikwad, A.J., 2017. Coupled thermo-structural analysis for in-vessel retention in PHWR using ABAQUS. Nuclear Engineering and Design 323, 407–416. https://doi.org/10.1016/j.nucengdes.2017.05.024
Sánchez-Gutiérrez, J., Chao, J., Vivas, J., Galvez, F., Capdevila, C., 2017. Influence of Texture on Impact Toughness of Ferritic Fe-20Cr-5Al Oxide Dispersion Strengthened Steel. Materials 10, 745. https://doi.org/10.3390/ma10070745
Zhao, Q., Qiao, Z., Liu, Y., Yu, L., Huang, Y., Guo, Q., Li, H., 2019. Characterization of 14Cr ODS Steel Fabricated by Spark Plasma Sintering. Metals 9, 200. https://doi.org/10.3390/met9020200
Qiu, G., Zhan, D., Li, C., Yang, Y., Qi, M., Jiang, Z., Zhang, H., 2019. Influence of Inclusions on the Mechanical Properties of RAFM Steels Via Y and Ti Addition. Metals 9, 851. https://doi.org/10.3390/met9080851
Bai, F., Ding, H., Tong, L., Pan, L., Wang, L., 2019. Microstructural Changes and Impact Toughness of Fill Pass in X80 Steel Weld Metal. Metals 9, 898. https://doi.org/10.3390/met9080898
Zheng, P., Li, Y., Zhang, J., Shen, J., Nagasaka, T., Muroga, T., Abe, H., 2020. On the thermal stability of a 9Cr-ODS steel aged at 700 °C up to 10000 h - Mechanical properties and microstructure. Materials Science and Engineering: A 783, 139292. https://doi.org/10.1016/j.msea.2020.139292
Wang, Q., Ye, Q., Wang, Z., Kan, L., Wang, H., 2020. Thickness Effect on Microstructure, Strength, and Toughness of a Quenched and Tempered 178 mm Thickness Steel Plate. Metals 10, 572. https://doi.org/10.3390/met10050572
Chen, W., Gao, P., Wang, S., Zhao, X., Zhao, Z., 2020. Strengthening mechanisms of Nb and V microalloying high strength hot-stamped steel. Materials Science and Engineering: A 797, 140115. https://doi.org/10.1016/j.msea.2020.140115
Mohyla, P., Hajnys, J., Sternadelová, K., Krejčí, L., Pagáč, M., Konečná, K., Krpec, P., 2020. Analysis of Welded Joint Properties on an AISI316L Stainless Steel Tube Manufactured by SLM Technology. Materials 13, 4362. https://doi.org/10.3390/ma13194362
Koga, N., Nameki, T., Umezawa, O., Tschan, V., Weiss, K.-P., 2021. Tensile properties and deformation behavior of ferrite and austenite duplex stainless steel at cryogenic temperatures. Materials Science and Engineering: A 801, 140442. https://doi.org/10.1016/j.msea.2020.140442
Wu, Y., Zhao, H., Li, J., Zhang, Y., Liu, T., 2021. Effects of Y4Zr3O12 addition on the microstructure and mechanical properties of Fe–15Cr–2W-0.35Ti ODS steels. Materials Science and Engineering: A 804, 140734. https://doi.org/10.1016/j.msea.2021.140734
Liu, W., Liu, Z., Luo, W., Zuo, D., Liu, H., Zhang, R., Wang, Q., 2022. Effect of Zr addition on coarse Laves phase stimulated nucleation of recrystallization in FeCrAl alloy. Materials Science and Engineering: A 840, 142964. https://doi.org/10.1016/j.msea.2022.142964
Xu, Y., Yun, D., Yan, X., Zhang, P., Yan, W., Li, Y., Li, C., Li, Jiao, Zhang, T., Li, Jun, Zhou, J., Kang, L., Lu, C., 2023. Effects of Fe self-ion irradiation on a low carbon MX-ODS steel at 550°C. Frontiers in Energy Research 10.https://doi.org/10.3389/fenrg.2022.988745
Ashong, A.N., Arkhurst, B.M., Yang, S.-M., Park, T., Noh, S., Chang, H.J., Kim, J.H., 2023. Effect of radio-frequency plasma spheroidization on the microstructure and mechanical properties of 10Cr ferritic oxide dispersion-strengthened steel. Materials Science and Engineering: A 863, 144528. https://doi.org/10.1016/j.msea.2022.144528
Bajželj A, Balaško T, Šetina Batič B, Burja J. Optimizing Hot-Work Tool Steel Microstructure for Enhanced Toughness. Crystals. 2024; 14(1):26. https://doi.org/10.3390/cryst14010026