How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want earbuds purpose-built for a Meta Quest 2 VR headset and its specific cable geometry, choose AMVR Noise Isolating Earbuds; if you need a general-purpose pair of wired in-ear headphones with a wider tip selection and a longer tangle-free cable, choose Yatloml Earbuds. Both use a 3.5 mm jack and rely on sound isolation rather than active noise cancellation, so the real decision comes down to fit, cable length, and what you plan to plug them into.
• AMVR's biggest strength: a VR-specific design — calibrated left/right mono channels for 360-degree 3D sound, plus two silicone holders that clip the buds to a Quest 2 headset so they're always within reach.
• AMVR's biggest trade-off: it's a niche product. The split cable (9.3-inch left, 18.3-inch right) is tuned for a headset, and the colorway is white only.
• Yatloml's biggest strength: fit flexibility and a standard cable. You get 3.8 feet of tangle-free wire plus three rubber tips and two sets of memory foam tips to dial in isolation.
• Yatloml's biggest trade-off: it's a generic in-ear set with no VR calibration, no storage holders, and no inline remote listed — the control type is touch with no controller.
• Buy AMVR if you mainly game in VR and want sound that's matched to the headset.
• Buy Yatloml if you want one everyday pair for a phone, laptop, tablet, or MP3 player.
The AMVR set is built around one job: making a Quest 2 sound bigger than its built-in speakers. Each earbud uses a 10 mm neodymium dynamic driver with a 16-ohm impedance and a 20Hz–20kHz range, and the left and right channels are mono-calibrated by direction and distance to produce a 360-degree 3D effect. In practice, that means the stereo image is meant to track with how you move your head in a game, which matters more in VR than raw output.
The physical design is where the VR focus shows. The left cable is 9.3 inches and the right is 18.3 inches, which is a deliberately uneven split so the wires route around a headset strap instead of tangling under your chin. Two silicone holders let you park the buds on the headset when you pull it off, and the housings are aluminum alloy with TPE, weighing 20 g total. The set ships with six silicone ear caps across three sizes (S/M/L), and the buds are marked L and R in red and blue. There's also a volume control on the remote and an 18-month warranty.
Who should buy it: Quest 2 owners who want in-ear audio that stays put, stores on the headset, and is calibrated for VR rather than for a phone. Who should skip it: anyone who wants a single pair for commuting or laptop calls. The white aluminum finish and headset-mounted holders make less sense away from VR, and there's no microphone listed for calls.
The Yatloml set is the more conventional wired in-ear headphone, and it's aimed at breadth. It uses a 10 mm dynamic driver with a 16-ohm impedance, a 20Hz–20kHz frequency response, and a rated sensitivity of 112 dB, wrapped in an aluminum shell with a double-layer-protected cable that's meant to resist fraying. The 3.5 mm plug works with Samsung phones, iPhone (via adapter), laptops, tablets, and MP3 players, and the brand positions it for work, study, sports, and games.
Fit is the headline feature. Yatloml includes three rubber ear tips and two sets of memory foam tips, so you can chase a real seal — and the seal is what delivers the noise isolation, since there's no active cancellation here. The 3.8-foot tangle-free cord gives you noticeably more slack than the AMVR's short left channel, which is a genuine advantage if your device sits on a desk or in a pocket rather than strapped to your face. A storage bag is included, and the warranty runs one year.
Who should buy it: anyone who wants one affordable, flexible wired pair for music, video, and calls-adjacent listening on standard 3.5 mm gear, and who values being able to swap between foam and rubber tips. Who should skip it: VR players. Nothing here is calibrated for a headset, there's no holder to clip the buds to anything, and the cable length is generic rather than routed for a strap.
• Best for VR gaming → AMVR Noise Isolating Earbuds. Direction- and distance-calibrated 3D channels and headset-mounted holders are built for the Quest 2.
• Best for everyday devices → Yatloml Earbuds. The 3.8-foot cable and standard 3.5 mm plug suit phones, laptops, tablets, and MP3 players.
• Best for fit customization → Yatloml Earbuds. Three rubber tips plus two memory foam sets beats AMVR's silicone caps alone.
• Best for cable routing around a headset → AMVR Noise Isolating Earbuds. The 9.3-inch left / 18.3-inch right split exists to avoid hooks and snags.
• Best for keeping buds attached to your gear → AMVR Noise Isolating Earbuds. Two silicone holders let you store the earbuds on the headset.
• Best for durability-minded buyers → Yatloml Earbuds. Its cable uses a double-layer protection design and the shell is aluminum.
• Best for a known long support window → AMVR Noise Isolating Earbuds. It lists an 18-month warranty versus Yatloml's one year.
• Best for a lighter, simpler carry → Yatloml Earbuds. At 0.02 kg with a storage bag, it's the easier pair to toss in a pocket.
In my opinion, most people should buy the Yatloml Earbuds. It's the more versatile object: a normal-length tangle-free cord, a 3.5 mm jack that fits nearly everything, and five total tip options to get a proper isolating seal. If you own a Meta Quest 2 and want audio that's actually designed around that headset — the calibrated 3D channels, the asymmetric cable, the clip-on holders — then I'd pick the AMVR Noise Isolating Earbuds instead. Neither has active noise cancellation, so your seal is the whole game. Check the current price on Amazon before you commit, since that's the one thing specs can't tell you.
FAQ
how to noise cancelling wired headphones
what is the best wired noise cancelling headphones
There isn't one universal answer, because it depends on your device. For a Quest 2, the AMVR set's calibrated 360-degree 3D channels and 9.3-inch/18.3-inch split cable are the better match. For a phone, laptop, or MP3 player, the Yatloml set's 3.8-foot cord and wider tip selection fit the job better.
is there wired noise cancelling headphones
Yes, in the sense of wired headphones that isolate noise rather than actively cancel it. Both of these are 3.5 mm wired in-ear models with sound isolation listed as the noise control method. If you specifically need active cancellation, that's a different category of product.
do these earbuds have a microphone
The data sheets don't list a microphone on either model, and Yatloml's specifications explicitly note "without microphone." If you need to take calls, treat both as listening-first earbuds and plan accordingly.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: BlueFire Gaming Headset vs BRAINWAVZ Angled Memory Foam, Smof Open Ear Headphones vs Avantalk Avantree Lingo N21, CozyPhones PJ Masks Catboy vs Boodlab Kids, JL&MI Neckband vs Ogogrs Bone Conduction Headphones