51) Luqman Ali Shah, et al. "Quick catalytic degradation of methylene blue using gellan gum-co-polymethacrylic acid hydrogel supported Ni-Cu bimetallic composite" Materials Science and Engineering: B (2026) (Corresponding author)
50) Arooba Shehzad, et al. "Modulating rheological analysis for poly(Acrylic acid-co-2-(Acryloyloxy)ethyl trimethylammonium chloride) adhesive hydrogels for enhanced adhesion on human skin and solid surfaces" Materials Today Communications (2025) (Corresponding author)
49) Byungjae Park, et al. "Detecting Small Leaks in Pipeline with Semi-Supervised Ensemble Learning Using Acoustic Emission Sensor" International Journal of Precision Engineering and Manufacturing (2025) (Corresponding author)
48) Deepak Poddar, et al. "Impact of particle structure on the storage stability and release kinetics of essential oil encapsulated in shellac particle for high-barrier paper coatings for food packaging applications" International Journal of Biological Macromolecules (2025) (Corresponding author)
47) Tanzil Ur Rehman, et al. "Bio-inspired hydrogels comprising organic and inorganic components association explored as Bingham precursor solution for extending direct ink writing technique in 3D printing." International Journal of Biological Macromolecules (2025) (Corresponding author)
46) Tanzil Ur Rehman, et al. "Molecular topology and rheological study of guar gum and bentonite reinforced polymer hydrogels for potential application in strain sensor and electrode materials." International Journal of Biological Macromolecules (2025) (Corresponding author)
45) Pandey, Kalpana, et al. "DEVELOPMENT OF INJECTABLE SCAFFOLDS ENCAPSULATING BIOACTIVE GLASS FIBERS: OPTIMIZATION AND FORMATION OF POROUS POLYMER MICROPARTICLES." Ceramics International (2025) (Corresponding author)
44) Anum, Shafia, et al. "Supramolecular Polymer Hydrogels through Rapid Polymerization Enabled by Tannic Acid-Silver Dual Catalysis for Next-Generation Flexible and Wearable Sensors." ACS Applied Electronic Materials (2025)
43) Ali, Mohsin, et al. "Ag-loaded functionalized biopolymer-based hybrid hydrogel for catalytic reduction of organic dyes." Journal of Dispersion Science and Technology (2025) (Corresponding author)
42) Ullah, Faheem, et al. "Fabrication of xanthan gum based polymeric hydrogels: Rheological investigation, toughness, and adhesion optimization." International Journal of Adhesion and Adhesives (2025) (Corresponding author)
41) Poddar, Deepak, et al. "Streamlining electrospun shellac coatings on paper for high moisture strength and barrier food packaging film: Tailoring the processing parameters for accelerated coating." International Journal of Biological Macromolecules (2025) (Corresponding author)
40) Pandey, Kalpana, et al. "Zerovalent iron encapsulated shellac polymer composite particles for alkaline wastewater treatment and oil-water separation." Journal of Industrial and Engineering Chemistry (2025) (Corresponding author)
39) Khan, Mansoor, et al. "Ultra-adhesive iontronic hydrogels strengthened by folded protein for flexible transducer with language recognition capabilities." Chemical Engineering Journal (2025) (Corresponding author)
38) Poddar, Deepak, et al. "Development of electrosprayed assisted shellac-MOF particle coated paper for food packaging and its environmental impacts." Sustainable Materials and Technologies (2024) (Corresponding author)
37) Kim, Seon-Ju, et al. "Fabrication of thermoplastic resin (PLCL (Poly L-Lactide co ε-Caprolactone)) based Macro Fiber Composite sensors through In-situ polymerization ." Journal of the Korean Society of Manufacturing Technology Engineers (2024) (Corresponding author)
36) Kim, Seon-Ju, et al. "In-situ fabrication of poly-l-lactide & its application as a glass fiber polymer composites using resin transfer molding ." Polymer Composites (2024) (Corresponding author)
35) Ullah, Rafi, et al. "The development of anti-freezing and anti-evaporating conductive organohydrogel for flexible strain-sensing electronic devices." RSC Advances (2024)
34) Sher, Muhammad, et al. "Facile fabrication of stretchable, anti-freezing, and stable organohydrogels for strain sensing at subzero temperatures." Materials Advances (2024)
33) Ara, Latafat, et al. "Dually-crosslinked ionic conductive hydrogels reinforced through biopolymer gellan gum for flexible sensors to monitor human activities." International Journal of Biological Macromolecules (2024)
32) Khan, Mansoor, et al. "Bimetallic-MOF Tunable Conductive Hydrogels to Unleash HighStretchability and Sensitivity for Highly Responsive Flexible Sensorsand Artificial Skin Applications." ACS Applied Polymer Materials (2024) (Corresponding author)
31) Khan, Mansoor, et al. "Multi-role conductive hydrogels for flexible transducers regulated by MOFs for monitoring human activities and electronic skin functions" RSC Journal of Materials Chemistry B (2024) (Corresponding author)
30) Khan, Mansoor, et al. "Flexible ionic conductive hydrogels with wrinkled texture for flexible strain transducer with language identifying diversity" Chemistry of Materials 36.9 (2024): 4703-4713. (Corresponding author)
29) Lee, Beom-Joo, et al. "Effects of Carbon Black on Mechanical Properties and Oil Resistance of Liquid Silicone Rubber." Polymers 16.7 (2024): 933 (Corresponding author)
28) Sher, Muhammad, et al. "Xanthan gum toughen ionically conductive hydrogels for flexible and artificial epidermis sensors with multifunctionality and self-healability." Sensors and Actuators A: Physical 370.1 (2024): 115199.
27) Khan, Mansoor, et al. "Multiple-Language-Responsive Conductive Hydrogel Composites for Flexible Strain and Epidermis Sensor." ACS Applied Polymer Materials (2024) (Corresponding author)
26) Park, Jaehyun, et al. "Acoustic emission (AE) technology-based leak detection system using Macro-fiber composite (MFC) sensor." Composites Research 36.6 (2023): 429-434. (Corresponding author)
25) Kim, Seon-Ju, et al. "Manufacturing Fiber-Reinforced Composite Materials Based on PLA (Poly L-Lactide) Resin Using In-Situ Polymerization and Molecular Weight Measurement Using GPC." Design & Manufacturing 17.3 (2023): 28-33. (Corresponding author)
24) Khan, Mansoor, et al. "Micelle–Micelle Cross-Linked Highly Stretchable Conductive Hydrogels for Potential Applications of Strain and Electronic Skin Sensors." Chemistry of Materials (2023) (Corresponding author)
23) Lee, Beom-Joo, et al. "Effects of Carbon Black on Mechanical Properties and Curing Behavior of Liquid Silicone Rubber (LSR)." Design & Manufacturing 17.2 (2023): 27-32. (Corresponding author)
22) Kang, Byungsoo, et al. "A study on the development of an automated device for the transportation of roof tiles using electromagnetic grippers." Design & Manufacturing 17.2 (2023): 1-8. (Corresponding author)
21) Khan, Mansoor, et al. "6-amino caproic acid regulated mechanical performance of ionically conductive ultra-stretchable hydrogels for flexible strain and epidermis sensors." Sensors and Actuators A: Physical 356.16 (2023) : 114363. (Corresponding author)
20) Yoo, Hyeong Min. "Analysis of cure behavior of low temperature curing liquid silicone rubber (LSR) for multi-material injection molding." Design & Manufacturing 17.1. (2023) : 1-6. (Corresponding author)
19) Kwon, Dong-Jun, et al. "Enhanced Mechanical Joining between Carbon-Fiber Reinforced Plastic and Steel Plates Using the Clearance-Filling Effect of Structural Adhesive." Applied Science 13.7 (2023): 4332. (Corresponding author)
18) Khan, Mansoor, et al. "Cellulose nanocrystals boosted hydrophobic association in dual network polymer hydrogels as advanced flexible strain sensor for human motion detection." Journal of the Mechanical Behavior of Biomedical Materials (2022) : 105610.
17) Khan, Mansoor, et al. "Hydrophobically Associated Functionalized CNT-Reinforced Double-Network Hydrogels as Advanced Flexible Strain Sensors." ACS Applied Polymer Materials 4.10 (2022): 7397-7407.
16) Kang, Byungsoo, et al. "A study on the automatic inspection system for inner diameter and parallelism of automobile hubs.” Design & Manufacturing 16.3 (2022): 16-21. (Corresponding author)
15) Park, Jaehyun, et al. "A study on designing spindle stage using optimization of flexure.” Design & Manufacturing 16.3 (2022): 22-27. (Corresponding author)
14) Kang, Byungsoo, et al. "A study on the drawing device and curing mold in CFRP rectangular pipe pultrusion process using a closed impregnation method.” Design & Manufacturing 16.2 (2022): 60-65. (Corresponding author)
13) Park, Jaehyun, et al. "Effects of PZT Powder on Vibration and Compression Properties of Ti Powder/Polymer Concrete Composites.” Composites research 35.3 (2022): 134-138. (Corresponding author)
12) Kang, Byungsoo, et al. "Processing and Evaluation of a Carbon Fiber Reinforced Composite Bar Using a Closed Impregnation Pultrusion System with Improved Production Speed.” Applied Science 12.10 (2022): 4906. (Corresponding author)
11) Yoo, Hyeong Min , Su-Yeon Jeong, and Sung-Woong Choi. "Analysis of the rheological property and crystallization behavior of polylactic acid (Ingeo™ Biopolymer 4032D) at different process temperatures." e-Polymers 21.1 (2021): 702-709. (First author)
10) Choi, Sung-Woong, et al. "Tow Deformation Behaviors in Resin-Impregnated Glass Fibers under Different Flow Rates." Applied Sciences 11.8 (2021): 3575. (Corresponding author)
9) Kwon, Dong-Jun, Pyeong-Su Shin, and Hyeong Min Yoo. "Effects of Ru catalyst changes by atmospheric exposure days on the interfacial and impact properties of glass fiber/p-DCPD composites." Journal of Polymer Engineering 41.3 (2021): 184-191. (Corresponding author)
8) Dong-Jun Kwon, and Hyeong Min Yoo. "Mode 1 Fracture Toughness Test of CNT/Epoxy Composites with Different CNT Content." Transactions of the Korean hydrogen and new energy society 32.1 (2021): 86-91. (Corresponding author)
7) Yoo, Hyeong Min, et al. "Influence of Non-Reactive Epoxy Binder on the Permeability and Friction Coefficient of Twill-Woven Carbon Fabric in the Liquid Composite Molding Process." Applied Science 10.20 (2020): 7039. (First author)
6) Choi, Sung Woong, et al. "Experimental approach of tow behaviors in resin-impregnated glass fiber for GFRP manufacture." Journal of the Korean Society of Marine Engineering 43.10 (2019): 805-809. (Corresponding author)
5) Yoo, Hyeong Min, Moon Kwang Um, and Sung Woong, Choi. "Manufacturing and numerical analysis of glass fiber chopped strand mat reinforced p-DCPD composites processed by S-RIM." Transactions of the Korean hydrogen and new energy society 30.6 (2019): 629-634. (First author)
4) Yoo, Hyeong Min, et al. " "Impact and shear properties of carbon fabric/poly-dicyclopentadiene composites manufactured by vacuum‐assisted resin transfer molding." e-Polymers 19 (2019): 437-443. (First author)
3) Yoo, Hyeong Min, et al. "Analysis of curing behavior of endo-dicyclopentadiene using different amounts of decelerator solution." Composites Part B: Engineering 161 (2019): 439-454. (First author)
2) Choi, Sung Woong, et al. "Analysis of thermal properties and heat transfer mechanisms for polyurethane foams blown with water." Journal of Thermal Analysis and Calorimetry (2018): 1-10.
1) Yoo, Hyeong Min, et al. "Mechanical properties of norbornene-based silane treated glass fiber reinforced polydicyclopentadiene composites manufactured by the S-RIM process." e-Polymers 17.2 (2017): 159-166. (First author)