How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a wearable wireless microphone that gets your voice into a PA system, a Bluetooth speaker or a hearing aid setup with low latency and long range, choose Alead LiveMIC2; if you need true wireless earbuds built for gaming with 30ms low latency, ANC and a 2.4GHz dongle, choose KASOTT 2.4GHZ. These two products share the phrase "low latency Bluetooth," but they solve completely different problems. One is a transmitter for your voice. The other is a receiver for game audio. Figure out which side of that line you're on, and the decision makes itself.
• Alead LiveMIC2 — biggest strength: A dual-mode Bluetooth microphone (mode A for headphones/speakers/PA, mode B for phones/tablets/PC) with low latency, up to 20m (66 ft) range, selectable omnidirectional/unidirectional patterns, gain control and instant mute.
• Alead LiveMIC2 — biggest trade-off: It's a microphone, not a listening device. It won't play game audio, it needs a Bluetooth-capable host, and some Bluetooth speakers introduce their own echo that may require a companion receiver to fix.
• KASOTT 2.4GHZ — biggest strength: 30ms low-latency audio via a 2.4GHz USB-C dongle or Bluetooth 5.4, active noise cancelling, a 13mm dynamic driver, and up to 8 hours per charge (40 hours with the case).
• KASOTT 2.4GHZ — biggest trade-off: It's built around gaming platforms (PC, PS5/4, Switch, VR, Steam Deck, Meta Quest) and uses in-ear tips, so it's not a tool for capturing voice into a PA or hearing-aid chain.
• Pick Alead LiveMIC2 if you're the one talking — teaching, presenting, recording voiceover or feeding a sound system.
• Pick KASOTT 2.4GHZ if you're the one listening — gaming, watching, taking calls while a game runs.
The LiveMIC2 is a Bluetooth wireless microphone, and that single fact defines everything about it. It supports A/B dual mode: in mode A it pairs with Bluetooth headphones, speakers, receivers or PA systems, which is the path for distance education, webinars, conferences, presentations, panel sessions, speeches and hearing-impairment setups. In mode B it pairs with smartphones, tablets and PCs for voiceovers, interviews, voice recording and PC audio. A slide switch flips between the two, and the clip-on, 18g plastic body is designed to be worn rather than held.
What it does best is get a clean voice signal from a person to a sound system without a cable. You get three microphone choices — unidirectional, omnidirectional and an external omnidirectional option — plus gain (sensitivity) control and instant mute. That's a real toolkit for a speaker moving between a quiet classroom and a noisy hall. Alead rates the range up to 20m (66 ft), which covers most meeting rooms, classrooms, offices and living rooms, and the rechargeable battery runs up to 6 hours. The frequency response is listed at 100 Hz–10 kHz with a 20 kHz figure in the audio specs, and it uses A2DP for streaming audio.
Who should buy it: teachers running hybrid classes, webinar hosts, panel moderators, anyone feeding a PA or Bluetooth speaker, people doing voice recording and voiceovers, and households using a Bluetooth hearing aid or speaker who need the speaker's voice captured up close. Who should skip it: gamers. This is not a listening device, and there's no dongle or console support here. Also skip it if your PC or laptop has no Bluetooth at all — you'd need a Bluetooth USB adapter that supports the Headset/HandsFree profile. And note two practical caveats from the specs: the default voice and video recording apps on iPhone, iPad and Android do not support Bluetooth microphones, so you'll want a compatible recording app, and some Bluetooth speakers add their own audio lag that can cause echo.
The KASOTT 2.4GHZ — the GameMaster Buds YX37 — is the opposite kind of product: true wireless in-ear earbuds aimed squarely at gaming. Its headline claim is 30ms ultra-low latency, which is the number that matters when you're trying to sync a footstep or a gunshot to what you see on screen. It gets there two ways. First, a 2.4GHz wireless connection through the included USB-C dongle, which the specs describe as plug-and-play with a stable link to PC, PS4, PS5, VR headsets, Switch and other consoles. Second, Bluetooth 5.4 for everyday use. Both connections can run at once, so you can take a call without pausing your game.
On top of latency, KASOTT adds active noise cancelling with a 13mm composite dynamic driver, listing a 20 Hz–20,000 Hz frequency range. The ANC is described as adapting to your ear canal for stronger reduction, which is the kind of feature that matters for team chat and calls as much as for immersion. The controls combine push buttons and touch, and the earbuds are built with rounded tips and multiple earplug sizes for a stable in-ear fit — the design brief explicitly mentions women, children and people on the go.
Battery is a genuine strength: up to 8 hours per charge and up to 40 hours total with the charging case, plus a digital LED display on the case so you can see the level. There's also a fast-charge figure of 10 minutes for roughly 4 hours of use, and the case's USB-C port can pass charge through to another device while you play, provided you use a charger rated at least 9V/2A.
Who should buy it: console and PC gamers, VR and Steam Deck users, and anyone who wants one pair of earbuds that handles game audio, calls and music. Who should skip it: presenters, teachers and anyone who needs to capture their voice into a PA, speaker or hearing-aid chain. The KASOTT buds play audio; they don't transmit your voice to a room. And if you want to charge a device through the case, check your charger meets the stated output.
• Best for capturing your voice into a PA or speaker → Alead LiveMIC2. Mode A is built exactly for this.
• Best for gaming and console audio → KASOTT 2.4GHZ. The 30ms figure and USB-C dongle exist for this.
• Best for latency-critical listening → KASOTT 2.4GHZ. 2.4GHz dongle plus Bluetooth 5.4 is the more aggressive low-latency setup.
• Best for long-range voice pickup → Alead LiveMIC2. Up to 20m (66 ft), far beyond what earbuds are designed to cover.
• Best for battery life → KASOTT 2.4GHZ. Up to 8 hours per charge and up to 40 hours with the case, versus up to 6 hours for the LiveMIC2.
• Best for noise cancelling → KASOTT 2.4GHZ. Active Noise Cancellation is a listed feature; the LiveMIC2 doesn't offer it.
• Best for flexible mic patterns and gain control → Alead LiveMIC2. Uni, omni or external mic selection plus sensitivity control and instant mute.
• Best for wearing during a presentation → Alead LiveMIC2. An 18g clip-on transmitter beats holding a mic or standing at a lectern.
In my opinion, these aren't competitors — they're answers to two different questions. If you're producing sound, I'd buy the Alead LiveMIC2: the dual A/B modes, the three microphone options, the gain and mute controls and the 20m range give a presenter or teacher a genuinely flexible wireless voice tool, and the 6-hour battery covers a normal session. If you're consuming sound — and especially if you're gaming — I'd buy the KASOTT 2.4GHZ: 30ms latency over a 2.4GHz dongle, ANC, a 13mm driver and up to 40 hours with the case is the more complete package for that job. Decide whether you're the one talking or the one listening, and you'll know which one to check the current price on.
how to make bluetooth headphones low latency
The most reliable route is to avoid standard Bluetooth audio entirely when you can. The KASOTT 2.4GHZ does exactly this — it ships with a USB-C dongle that creates a dedicated 2.4GHz link rated at 30ms latency, sidestepping the usual Bluetooth audio delay. On the microphone side, the Alead LiveMIC2 lists low-latency support to minimize lag and echo in real time, though it notes that some Bluetooth speakers add their own delay that may need a companion receiver.
how to get low latency on bluetooth headphones windows 11
Use a dedicated low-latency link rather than the default Bluetooth audio path. The KASOTT buds' 2.4GHz dongle is plug-and-play on PC, so Windows treats it as a direct wireless audio device instead of a standard Bluetooth headset. If you must stay on Bluetooth, keep the earbuds on Bluetooth 5.4 and stay close to the machine — the specs don't list a Windows-specific codec toggle, so the dongle is the cleaner answer.
how to get low latency on bluetooth headphones
Look for hardware that advertises a low-latency figure and, ideally, a non-Bluetooth wireless option. KASOTT quotes 30ms over 2.4GHz and includes the dongle in the box. Alead takes a different approach on the transmit side, pairing low-latency support with up to 20m range for voice, and pointing users to a matching receiver if a Bluetooth speaker introduces echo.
do bluetooth headphones have latency
Yes — standard Bluetooth audio involves encoding and transmission delay, which is why both of these products emphasize low latency rather than treating it as automatic. KASOTT attacks it with a 2.4GHz dongle rated at 30ms; Alead attacks it on the input side with low-latency support designed to minimize audio lag and echo. If lag bothers you, prioritize products that name a latency figure or offer a 2.4GHz path.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Ozeino 2.4GHz vs Botesty Sound Kids: Bluetooth Headphones, Corsair HS80 vs Avantree HT4186-Q: Bluetooth Headphones Low, Gentechvvybuy V5.2 vs KAIY 5.3: Bluetooth Headphones for