Purkayastha, S., Ghosh, A. K., & Saha, S. "Nano fibrillated cellulose‐based foam by Pickering emulsion: Preparation, characterizations, and application as dye adsorbent, Polymer Engineering & Science.
Purkayastha S, Saha S, Ghosh AK “Influence of green extraction process of nano fibrillated cellulose using subcritical water/CO2 on its properties and development of its bio composite”, Polymer Engineering & Science, 61(5), 1310-1323.
Nayak, P., Ghosh, A. K., & Bhatnagar, N. (2021). “Investigation of Solution Rheology in Electrospinning of Ultra High Molecular Weight Polyethylene”, Fibers and Polymers, 1-10.
Nayak P, Ghosh AK, Bhatnagar N “Study of dynamic compressive responses of ultra-high molecular weight polyethylene felt impregnated with shear thickening fluid”, Polymer Composites.
Prakash, M., and Ghosh, A. K. “An investigation on optimization of instantaneous synthesis of TiO2 nanoparticles and it’s thermal stability analysis in PP-TiO2 nanocomposite” Solid State Sciences, 120, 106707.
Banerjee D., Dutta A., Vimal K. K., Kapur G. S., and Ghosh A. K , "Correlation of Micro- and Macrostructural Attributes with the Foamability of Modified Polypropylene Using Supercritical CO2 " Industrial & Engineering Chemistry Research, 58(27), 12054-12065.
Banerjee R., Ray S. S., and Ghosh A. K.," Investigations on blending and foaming behaviour of styrene-ethylene-butylene-styrene/ polystyrene Blends" International Polymer Processing, 32(4), 434-445
Swarna, Pattanayek, S.K. & Ghosh, A.K , "Dynamic shear rheology of colloidal suspensions of surface-modified silica nanoparticles in PEG", J Nanopart Res (2018) 20: 53.
Dutta A. and Ghosh Anup K., "Morphological and rheological footprints corroborating optimum foam processability of PP/ethylene acrylic elastomer blend", Journal of Applied Polymer Science, 135, 2018, 46322-46334.
Dutta A. and Ghosh Anup K., "Investigation on γ-irradiated PP/ethylene acrylic elastomer TPVs by rheological and thermal approaches", Radiation Physics and Chemistry, 144, 2018, 149-158.
Dutta A., and Ghosh Anup. K ., " Influence of thermal and morphological characteristics on mechanical responses of polypropylene/γ‐irradiated elastomer blends" Applied Polymer Science, 135(31), 46597
Sankarpandi S., Park C. B., and Ghosh A. K, “CO2-Induced Crystal engineering of Polylactide and the development of a polymeric nacreous microstructure”, Polymer International, 2017, DOI: 10.1002/pi.5417
Swarna, S. Pattanayeak, & Ghosh, A.K., “Role of hydrogen bond interactions in water–polyol medium in the thickening behavior of cornstarch suspensions” Colloid Polym Sci, 295:1117–1129, 2017.
. Banerjee R, Ray SS, Ghosh AK.. Investigations on blending and foaming behaviour of styrene-ethylene-butylene-styrene/ polystyrene Blends. International Polymer Processing, Accepted on March 18, 2017
Kumar, S., Bhatnagar, N., & Ghosh, A. K., "Effect of enantiomeric monomeric unit ratio on thermal and mechanical properties of poly(lactide)" Polymer Bulletin. http://doi.org/10.1007/s00289-015-1595-x, 2016
Zafar, M. T., Maiti, S. N., & Ghosh, A. K. "Effect of surface treatment of jute fibers on the interfacial adhesion in poly(lactic acid)/jute fiber biocomposites" Fibers and Polymers, 17(2), 266–274. http://doi.org/10.1007/s12221-016-5781-8, 2016
R. K. Singla, S. N. Maiti and A. K. Ghosh, Fabrication of Super Tough Poly(lactic acid)/ Ethylene-co-vinyl-acetate Blends via Melt Recirculation Approach: Static Short-term Mechanical and Morphological Interpretation, Royal Society of Chemistry Advances, 6, 14580-88, 2016.
Zafar M. T., Zarrinbakhsh N., Mohanty A. K., Misra M., Maiti S. N., & Ghosh A. K. Biocomposites based on poly(lactic acid)/willow-fiber and their injection moulded microcellular foams. Express Polymer Letters, 10 (2), 176–186.
Singla R. K., Maiti S. N., and Ghosh A. K. Crystallization, morphological and mechanical response of poly(lactic acid)/lignin based bio-degradable composites, Polymer-Plastics Technology and Engineering, 2016, 55 (5), 475-485.
Singla R. K., Maiti S. N., and Ghosh A. K. Mechanical, morphological and solid state visco-elastic responses of poly(lactic acid)/ethylene-co-vinyl-acetate super tough blend reinforced with halloysite nano tubes, Journal of Materials Science, 2016, 51 (22), 1-15.
Banerjee R., Ray S. S., and Anup K. Ghosh. “Dynamic Rheology and Foaming Behaviour of Styrene-Ethylene-Butylene-Styrene (SEBS)/ Polystyrene Blends.” Journal of Cellular Plastics, (2016), DOI: 10.1177/0021955X16652108.
Sankarpandi S., Park C. B., and Ghosh A. K. “CO2-Induced Crystallization of Polylactide and Its Self-Templating ‘Stack of Coins’ Crystalline Microstructure.” Polymer Engineering & Science (2016), DOI: 10.1002/pen.
Kommoji, S., Banerjee, R., Bhatnagar, N., & Ghosh, A. K. "Studies on the stretching behaviour of medium gauge high impact polystyrene sheets during positive thermoforming" Journal of Plastic Film and Sheeting, 31(1), 96-112, 2015.
M. Dwivedi, K. K. Gaur, S. Alam, N. Bhatnagar and A. K. Ghosh, "Processing of Polyetherimide/Cloisite 30B Nanocomposite by Vibration Casting Method", International Polymer Processing: Vol. 29, No. 5, pp. 635-640, 2014.
Priyanka Singh, A.K. Ghosh , “Torsional, tensile and structural properties of acrylonitrile–butadiene–styrene clay nanocomposites” Materials & Design Volume 55 page 137-145, 2014
Kumar, P. S., Kumar, G. K., Kommoji, S., Banerjee, R., & Ghosh, A. K. (2014). "The effect of material characteristics and mould parameters on the thermoforming of thick polypropylene sheets" Journal of Plastic Film and Sheeting, 30(2), 162-180, 2014.
Banerjee, Saikat, Joshi, Mangala, Ghosh, Anup K. “Investigations on clay dispersion in polypropylene/clay nanocomposites using rheological and microscopic analysis” Journal of Applied Polymer Science, Volume 130, page 4464-4473, 2013.
M H Alaei, R Kumar, P. Mahajan, P Singh, A K Ghosh, N Bhatnagar, " Design and Development of an Offset Lightweight Polymeric Orthotic Knee Joint for Polio and Cerebral Palsy Patients" Indian Journal of Biomechanics , Volume 4, page 1-6, 2013
Jutika Goswami,A.K. Ghosh Naresh Bhatnagar, S. Mohanty, “Processing and Characterization of Poly (Latic acid) based bioactive composites for biomedical saaffold application” Express Polymer Letter Vol7 page 767-777, 2013
Sumanda Bandyopadhyay, Rajgopal Iyer, Rajdeep Majumdar, Bhabani K Satapathy and Anup Ghosh “Studies on Wear Properties of Polystyrene in the presence of Fibrillated Network of Polytetrafluoroethylene," ISRN Polymer Science,2013
Manash Jyoti Kashyap and Anup K. Ghosh, “Processing, rheology and characterization of polypropylene nanocomposites and their blown films” Journal of Plastic Film & Sheeting, Volume 29 Issue 3, page No-228-248, 2013
Sneh Bharti, Josemon Jacob, and Anup K. Ghosh "Polyaniline Doped with α,ω-Alkanedisulfonic acids: Their Preparation and Characterization" Polymer International, Vol. 62, Issue 5, 797-805, 2013
Sangita Nandi, Susanta Mitra, Sanjukta Bose, and Anup K. Ghosh, “Dynamic Rheology and Morphology of HDPE- Fumed Silica Composites: Effect of Interface Modification” Polymer Engineering and Science, vol. 53, Issue 3, 644-650, 2013
Shikha Jain, Amar K. Mohanty, Manjusri Misra and Anup K. Ghosh, “Thermal, Mechanical and Rheological Behavior of Poly(lactic acid)/Talc Composites” Journal of Polymers and the Environment 20.4 (2012): 1027-1037.
Satpal Singh, Anup K. Ghosh, S. N. Maiti, S. Raha, Rahul Gupta and S. N. Bhattacharya, “Morphology and rheological behaviour of Polylactic acid (PLA)/clay nanocomposites”. Polymer Engineering & Science, Volume 52, Issue 2012.
Sangita Nandi, Susanta Mitra, Sanjukta Bose, Anup K. Ghosh, “Effect of maleic anhydride grafted polyethylene on engineering properties and morphology of fumed silica filled polyethylene blown films” Journal of Plastic Film and Sheeting, Volume 28 Issue 3, 2012 pp. 210 - 230
Gaurav Verma, Anupama Kaushik, Anup K Ghosh “Preparation, characterization and properties of organoclay reinforced polyurethane nanocomposite coatings” Journal of Plastic Film and Sheeting, Vol 0, 2012, pp 1-22.
Karin Odelius, Anders H glund, Sanjeev Kumar, Minna Hakkarainen, Anup K. Ghosh, Naresh Bhatnagar§, and Ann-Christine Albertsson* “Porosity and Pore Size Regulate the Degradation Product Profile of Polylactide” Biomacromolecules,, 12 (4), 1250–1258, 2011
Mayank Dwivedi, Alok Dixit, sarfaraz Alam and Anup k. Ghosh, “Effect of morophology on dielectric and tensile behaviour of nanoclay reinforced polytherimide nanocomposites” Journal of Applied Polymer Science. 2010.
Mayank Dwivedi, sarfaraz Alam and Anup k. Ghosh, “Correlation in Morphology and Thermal Behaviour of Nanoclay- reinforced Polytherimide Nanocomposites” Journal of Thermoplastic Composite Materials (2010): 0892705710388745
Shikha Jain, Murali M. Reddy, Amar K. 1.Mohanty, Manjusri Misra and Anup K. Ghosh, “A New Biodegradable Flexible Composite Sheet from Poly (lactic acid)/ Poly (å-caprolactone) Blends and Micro-TalcA New Biodegradable Flexible Composite Sheet from Poly(lactic acid)/Poly(ε-caprolactone) Blends and Micro-Talc” Macromolecular Materials and Engineering, 259, 750-762, 2010.
Mayank Dwivedi, Naresh Bhatnagar, Sarfaraz Alam and Anup K. Ghosh, Radar transparent glass fabric reinforced polyetherimide/Cloisite 30B nanocomposites, Polymers for Advanced Technologies, 21, 2010, 1-7. Publisher: Wiley Blackwell, USA
Saikat Banerjee, Mangala Joshi and Anup K. Ghosh, “A Spectroscopic Approach for Structural Characterization of Polypropylene/Clay Nanocomposite”- Polymer Composites Volume 31, Issue 12, pages 2007–2016, December 2010
Satpal Singh, Rahul K. Gupta, Anup K. Ghosh, S. N. Maiti, and Sati. N. Bhattacharya “Poly (L-lactic acid)/layered silicate nanocomposite blown film for packaging application: thermal, mechanical and barrier properties” - Journal of Polymer Engineering, Vol.30 Nos.5-7, (361-375) 2010
Gaurav Verma, Bhawna Kulshreshtha, Sandeep Tyagi and Anup K. Ghosh ”PBT/Thermoplastic Elastomer Blends—Mechanical, Morphological, and Rheological Characterization” Polymer-Plastics Technology and Engineering, Volume 47, Issue 10 October 2008 , pages 969 - 977
Mayank Dwivedi and Anup K. Ghosh, ‘Continuous Fiber Composites with Nanoreinforced Matrix: Advanced Structural Materials’, Polymer- Plastics Technology and Engineering, 47, 2008, 1147- 1153. Publisher: Taylor & Francis, USA.
Jain Shikha, Ghosh A. K and Kulshreshtha Bhawna, “Processing and Properties of Polyethylene Based Nanocomposite Films with Antimicrobial Activity”, International Journal of Plastics Technology, Vol. 12, 943-955 (2008).
K. Senthil Kumar, N. Bhatnagar and Anup K. Ghosh “Mechanical Properties of Injection Molded Long Fiber Polypropylene Composites Part 2: impact and fracture toughness” Polymer Composites, 29, 525-533, (2008).
D. K. Kolluri, A. K. Ghosh, J. Bijwe "Influence of particle size of graphite on performance properties of friction composites" 07BC-55 25th Annual Brake Colloquium & Exhibition October 7-10, 2007 organized by Soc of Automotive Engineers (SAE) Omni Champions Gate Orlando, Florida, USA- (2007-01-3967) 223-230
Sangita Nandi, Ranjan K. Kamat and Anup K. Ghosh “Processability and Thermal Characteristics of Polypropylene/ Carbon Nanofiber Composites” International Journal of Plastics Technology, 11, 763-774, (2007).
K. Senthil Kumar, N. Bhatnagar and Anup K. Ghosh “Mechanical Properties of Injection Molded Long Fiber Polypropylene Composites Part 1: Tensile and flexural properties” Polymer Composites, 28, 259-266, (2007)
K. Senthil Kumar, Anup K. Ghosh and N. Bhatnagar “Mechanical Properties of Injection Molded Long Fiber Polypropylene Composites: Part 1: Tensile And Flexural Properties” Polymer Composites, Polymer Composites, Volume 28, Issue 2, (259-266) March 2007.
Kavita Abrol, G.N. Qazi and Anup K. Ghosh “Characterization of an Anion-exchange Porous Polypropylene Hollow Fiber Membrane for Immobilization of ABL Lipase” Journal of Biotechnology, Vol. 128, 838-848, (2007).
K. Senthil Kumar, Vijay Patel, Naresh Bhatnagar and Anup K Ghosh, “Studies on Long Glass Fiber Reinforced Polyamide-6 Composite” International Journal of Plastics Technology, (2007)
Nandi Sangita, Anup K. Ghosh, “Crystallization kinetics of impact modified polypropylene” Springer Science+ Business Media B.V. 2007, (387-397)
Dilip Kolluri, J. Bijwe and A. K. Ghosh “Analysis of Load and Temperature Dependence of Triboperformance of Graphite Filled Phenolic Composites” Materials Science & Engineering Part-A, (2006) Volume 456, Issues 1-2, 15 May 2007, Pages 162-169.
Kavita Abrol, G.N. Qazi and Anup K. Ghosh “Modification of Polypropylene Hollow Fibre Membrane for Immobilization of ABL Lipase International Journal of Plastics Technology 9, 483-494, (2006)
J. Bijwe , S. Awtade and A. K. Ghosh "Influence of Orientation and Volume Fraction of Aramid Fabric on Abrasive Wear performance of Polyethersulphone Composites" Wear, 260 Issue 4 – 5, 401-411, (2006).
K. Senthil Kumar, Anup K. Ghosh and N. Bhatnagar "Development of Long Glass Fiber Reinforced Polypropylene Composites: Mechanical and Morphological Characteristics” Journal of Reinforced Plastics and Composites, (2006)
Pich, S. Bhattacharya, Anup K. Ghosh and H.J.P. Adler “Composite Magnetic Particles: 2. Encapsulation of Iron Oxide by Surfactant-Free Emulsion Polymerization” Polymer 46, 4596-4603 (2005).
Poonam Singh, Madhumita Saroop and Anup K. Ghosh “Morphology and Properties of Modified Polypropylene for Extruded Film Applications" Journal of Polymer-Plastics Technology & Engineering 44: 1-18, (2005).
Jayashree Bijwe, Sukanta singh and Anup K.Ghosh. “Influence of PTFE content in PEEK-PTFE Blends on Mechanical Properties and Tribo-Performance in Various wear modes” Wear 258, 1536-1542, (2005).
Jaykisor Pal, Harpal Singh and Anup.K.Ghosh. “Modification of LLDPE Using Esterified Styrene Maleic Anhydride Copolymer: Study of its Properties and Environmental Degradability” J. Applied. Polym Sci, V.92, Issue 1, 102-108, (2004).
Shounak Dey Roy, Charanjit S. Sidhu, Ashok Misra and Anup K. Ghosh “Part Performance Evaluation in terms of Residual Stress in Thermoformed Polycarboate Sheets” International Journal of Plastics Technology Vol. 8, 197-204 (2004)
G.S. Ananthapadmanabha and Anup K. Ghosh, “Morphology and Impact Behaviour of Poly(butylene terephthalate)/Poly(ethylene-octene) Elastomer Blends” International Journal of Plastics Technology Vol. 8, 267-378 (2004).
Arup R. Bhattacharyya, Anup K. Ghosh and Ashok Misra, “Ionomer Compatibilised PA6/EVA Blends” Polymer Processing Society Symposium, Melbourne, Australia, July (2003).
Sandeep Tyagi and Anup K. Ghosh “Effect Of Viscosity Ratio And Screw Rotational Speed On The Evolution Of Morphology In Immiscible Polymer Blends” Polymer Processing Society Symposium, Melbourne, Australia, July (2003).
Madhumita Saroop, Anup K.Ghosh and G.N. Mathur “Polyaniline Based Conductive Polymers - An Overview” International Journal of Plastics Technology, V.7, 41-61 (2003).
Bhawna Kulshreshtha and Anup K. Ghosh, Ashok Misra "Crystallization and Equilibrium Melting Behaviour of Poly(butylene terephthalate)/Epoxy Blends” Journal of Macromolecular Science – Physics, 42 (2), 309-325 (2003).
Bhawna Kulshreshtha, Anup K. Ghosh and Ashok Misra "Crystallization Kinetics and Morphological Behavior of Reactively Processed PBT/epoxy Blends” Polymer, 44, 4723-4734 (2003).
Arup Bhattacharyya, Ashok Misra and Anup K. Ghosh “Ionomer Compatibilised PA6/EVA Blends: Mechanical Properties and Morphological Characterzation” Polymer, 44, 1725-1732 (2002).
Shounak Dey Roy, Anup K. Ghosh and Ashok Misra “Thermoforming of Engineering Thermoplastics : A Survey and Case Study with Polycarbonate Sheets” International Journal of Plastics Technology – Vol.5, 43-54 (2002)
Anup K. Ghosh, J. Indumathi and J. Bijwe “Influence of Weave of Glass Fabric on Oscillating Wear Performance of Polyetherimide (PEI)” Wear 253 (7-8) 803-812, (2002).
S. Tyagi, Anup K. Ghosh, P. Montanari, G.W.M. Peters and H.E.H. Meijer “Linear Viscoelastic and Transient behaviour of Polypropylene and Ethylene vinyl acetate (PP/EVA) Blends. An Evaluation of the Palierne and a New Nonlinear Viscoelastic Model for Dispersive Mixtures” Polymer Engineering and Science, 42, 2107-2119 (2002).
Anup K. Ghosh, Jayashree Bijwe, J. Indumathi and Bhabani K. Satapathy "Influence of Carbon Fabric on Fretting wear Performance of Polyetherimide Composite” Journal of Tribology, vol. 124, 834-839 (2002).
S. Tyagi and Anup K. Ghosh “Morphology Development during Blending of Immiscible Polymers in Screw Extruders” Polymer Engineering and Science, vol. 42, 1309-1321 (2002).
J. Bijwe, J. Indumathi and Anup K. Ghosh, “On the Abrasive Wear Behaviour of Fabric Reinforced Polyetherimide Composites” Wear 253, (7-8) pp.768-777, (2002).
A.R. Bhattacharyya, Anup K. Ghosh, and A. Misra “Reactively Compatibilised Polymer Blends: A Case study on PA6/EVA Blend System” Polymer, 42, 9143-9154, (2001).
P. Jain, A. Misra and Anup K. Ghosh, “Comaptibilisation of Polypropylene and Polybutylene terephthalate Blends Using Reactive Extrusion: Mechanical Properties, Morphological and Rheological Studies” Journal of Polymer Materials, 18, 341-354, (2001).
Anup K. Ghosh, J. Indumathi and J. Bijwe “On the Feasibility of using Cryo-treatment as Tool to Enhance the Abrasive Wear Behaviour of Solid Lubricated Polymer Composites” J. Synthetic Lubrication, 17(2), 123-134, (2000).
J. Bijwe, J. John Rajesh, A. Jeyakumar, Anup K. Ghosh and U.S. Tewari “Influence of Solid Lubricants and Fiber Reinforcement on Wear Behaviour of Polyethersulphone” Tribology International, 30(10), 697-706, (2000).
Anup K. Ghosh, J. Indumathi and J. Bijwe “Preliminary Studies on the Influence of Cryo-treatment on Mechanical an Tribological Properties of PTFE an Composites” J. Synthetic Lubrication, 17(4), 309-331, (2000).
Anup K. Ghosh, J. Bijwe, J. John Rajesh and A. Jeyakumar “Role of Solid Lubricants and Fibrous Reinforcement in Modifying Wear Performance of Polyethersulphone” J. Synth. Lubrication, 17(2), 99-107, (2000).
Anup K. Ghosh, J. Bijwe, J. John Rajesh and A. Jeyakumar “Influence of Solid Lubricants and Fibre Reinforcement on Wear Behaviour of Polyethersulphone” Tribol. Intl. 30(10) 697-706, (2000).
Anup K. Ghosh, A. Misra and B. Kulshreshtha “Reactive Processing of PBT/Epoxy Resin: Processability and Morphology of the Blends” Recent Advances in Polymers and Composites (Ed. G.N. Mathur, L.D. Kandpal and A.K. Sen), Allied Publishers Limited, New Delhi, (2000).
Anup K. Ghosh, S. Tyagi“An Insight into the Rheology-Morphology Relationship of PP/EVA Blends” Recent Advances in Polymers and Composites (Ed. G.N. Mathur, L.D. Kandpal and A.K. Sen), Allied Publishers Limited, New Delhi, (2000).
Anup K. Ghosh, P. Jain and A. Misra “Studies on Reactive Compatibilisation and Structure Development of PP/PBT Blends” Recent Advances in Polymers and Composites (Ed. G.N. Mathur, L.D. Kandpal and A.K. Sen), Allied Publishers Limited, New Delhi, (2000).
Anup K. Ghosh, J. Indumathi, J. Bijwe “Effect of Cryo-treatment on Abrasive Wear Performance of Engineering Polymers” Recent Advances in Polymers and Composites (Ed. G.N. Mathur, L.D. Kandpal and A.K. Sen), Allied Publishers Limited, New Delhi, (2000).
Anup K. Ghosh, J. Indumathi, J. Bijwe, M. Fahim and N. Krishnaraj “Wear of Cryo-treated Engineering Polymers and Composites” Wear, 225-229, p 343-353, (1999).
Anup K. Ghosh, J. Indumathi and J. Bijwe "Evaluation of Engineering Polymeric Composites for Abrasive Wear Performance" Journal of Reinforced Plastics and Composites, 18(17), 1573-1591, (1999).
Anup K. Ghosh, A. Misra, B. V. Venkat Prasad and V. Ahuja “Effect of Corner Radius and Pre-Blow on Thickness Distribution in Thermoformed Products” Polymer Beyond 2000 AD (Ed. A. K. Ghosh), Replica Press, New Delhi, (1999).
Anup K. Ghosh and S. Tyagi “Dynamics of Polymer Blending in Single Screw Extruder” Polymer Beyond 2000 AD (Ed. A. K. Ghosh), Replica Press, New Delhi, (1999).
Anup K. Ghosh, A. Misra and P. Jain “Polypropylene/Polybutylene Terepthalate Alloys: Morphological and Mechanical Studies” Polymer Beyond 2000 AD (Ed. A. K. Ghosh), Replica Press, New Delhi, (1999).
Anup K. Ghosh, J Indumathi and J. Bijwe “Role of Fibres and Solid Lubricants on the Wear Behaviour of Polyetherimide Composites” Polymer Beyond 2000 AD (Ed. A. K. Ghosh), Replica Press, New Delhi, (1999).
Anup K. Ghosh, J. Indumathi and J Bijwe “Role of Fibres/Fillers on Abrasive Wear Performance of High Temperature Polymers” Macromolecules New Frontiers, Vol. II (Ed. K. S. V. Srinivasan), (1998).
Anup K. Ghosh, Ajay Tewari and B.L. Deopura "Morphology and Properties of a Liquid Crystal Copolyester Fibre" International Plastics Engineering and Technology, Vol. 3, 73-83 (1997).
Anup K. Ghosh and Pankaj Khandelwal "Dynamics of Polymer Blends Morphology" Polymer Processing Society symposium, Sorrento, Italy (1996).
Anup K. Ghosh and Rajat B. Datta "Development of Tailored Polyblends through Extrusion Melt Mixing" Polymer Science Recent Advances Vol. 2, (Ed. I.S. Bhardwaj), Allied Publishers, New Delhi, (1994).
Anup K. Ghosh and J.T. Lindt "Fluid Mechanics of the Formation of Polymer Blends, Part I: Formation of Lamellar Structures” Polymer Engineering Science, Vol. 32, No. 24, 1802 (1992).
J. T. Lindt and Anup K. Ghosh "Processing of ABS Latex in a Screw Extruder", International Polymer Processing, Vol.V, 195 (1990).
Anup K. Ghosh and J.T. Lindt "Processing of Polymer Latex Emulsion: Batch Coagulation", Journal of Applied Polymer Science Vol. 39, 1553 (1990).
Anup K. Ghosh, S. Lorek and J.T. Lindt "Transport Phenomena and Morphology Development During Melting Blends of Two Similar Polymer" Polymer Processing Society Symposium, Nice, France, April (1990).
Anup K. Ghosh and J.J. Ulbrecht "Bubble Formation From Sparger in Polymeric Solutions. Part I: Stagnant Liquid" Chemical Engineering Science, Vol. 44, 957 (1989).
Anup K. Ghosh and J.J. Ulbrecht "Bubble Formation From Sparger in Polymeric Solutions, Part II: Moving Liquid" Chemical Engineering Science, Vol. 4, 969 (1989).
Anup K. Ghosh, R. Allard, J.M. Charrier, M. Marangou, M.E. Ryan, S. Shrivastava and R. Wu "An Engineering Study of the Thermoforming Process: Experimental and Theoretical Considerations" Jr. Polymer Engg., Vol. 6, 363 (1986).
Anup K. Ghosh, Y. Kawase and J.J. Ulbrecht "Turbulent Natural Convection Heat Transfer From a Vertical Plate to the Power law Fluids at High Prandtl Numbers" Int. Comm. Heat Mass Transfer, Vol. 12(6), 687 (1985).
Anup K. Ghosh, A.K. Gupta, Anil Kumar and S.K. Gupta "Analysis of Wiped Film Reactors Using the Orthogonal Collocation Technique" Jr. Applied Polymer Science, Vol. 29, 3217 (1984).
Anup K. Ghosh, A.K. Gupta, Anil Kumar and S.K. Gupta "Modelling of Melamine Formaldehyde Polymerization" International Chemical Reaction Engineering Conference, NCL, Poona, Wiley, New Delhi (1984).
Anup K. Ghosh, Santosh K. Gupta and Anil Kumar "Simulation of Reversible AA + BB Polycondensation in Wiped Film Reactors" Jr. Applied Polymer Science, Vol. 28, 1063 (1983).
Anup K. Ghosh, Anil Kumar and S.K. Gupta "Comments on Simplified Analysis of the Performance of Wiped Film Polycondensation Reactors" Ind. Engg. Chem. Fundamental, Vol. 22, 268 (1983).
“An improved Geo synthetic Clay Liner and method of manufacture thereof” Application no. 1198/DEL/2002 dated 28/11/2002
“Rust Reforming and Inhibiting Composition” Indian Patent No 607/DEL/2003 dated 16.04.2003
“Rust Inhibiting Overcoat Composition” Indian Patent No 608/DEL/2003 dated 16.04.2003
“Biodegradable Masterbatch (BioD-MB) Formulation for Packaging Film Application” Indian Patent Appl. No. 787/DEL/2004 dated 17.04.2004.
“Photodegradable Masterbatch (PhotoD-MB) Formulation for Packaging Film Application” Indian Patent Appl. No. 788/DEL/2004 dated 17.04.2004.
“Radial Impregnation Die (RID) for Rapid Processing of Continuous Fiber Thermoplastic Composites”, K. Senthil Kumar, N. Bhatnagar & A. K. Ghosh, Indian Patent No. 258/DEL/2008.
“A Composition with High Mechanical and Thermal Properties and Electromagnetic Transparency” Submitted to Indian Patent Office (2009)
“ An Apparatus & Method for Controlling Distribution and Dispersion of Nano Particles in Polymers” Submitted to Indian Patent Office (2009)
“Multi functional Knee Joint of FRP Composites For Polio and Cerebal Palsy Patients Indian” Patent No.1832/DEL/2009
"3D printable dynamically vulcanized polypropylene composites and its processes", patent application filed to Indian Patent Office (November, 2017); Application No: 201711042109.
"Process for preparing de-lignified micro-fibrillated fibres", Patent filed to Indian Office (December 2018), Application no. 201811049740
"Green extraction process of nanolignin from bio-wastes" Patent filed to Indian Office (August 2019), Application no.201911039238
"Process for preparing nanofibrillated celluloses" Patent filed to Indian Office (September 2019), Application no. 201911036271.
Processability of Polymers” –in progress, Springer (India) Pvt. Ltd (2015/16)
Processability of Polymer Composites”- in progress, Springer (India) Pvt. Ltd (2015/16)
Life Cycle Analysis of Plastics in Packaging” ICPE Publication, Thompson Press, New Delhi (2005)
Life Cycle Analysis in terms of Environmental Studies” ICPE Publication, Thompson Press, New Delhi (2002)
Plastics for Environment & Sustainable Development ICPE Publication, Thompson Press, New Delhi (2003)
Advanced Materials Research” IIT Delhi Research Review, Vol.1, Issue 3, April (2010)