Ph. D and Research Professor
Name : 정규석 (Ph. D, 2024 // M. S. 2021)
Research Topics : Simulation of the high temperature fuel cells (MCFC, SOFC)
M.S. paper : 판재점진성형의 단면변형 저감에 대한 연구
Ph. D paper : 전산 모사를 활용한 SOFC와 SOEC에서 겸용 가능한 접합형 분리판의 특성 분석
(Analysis of a bonded interconnector compatible with SOFC and SOEC using Computational Fluid Dynamics)
Now working at FCI
Name : 유제형 (Ph. D, 2023 // M. S. 2019)
Research Topics : Analysis of Acoustic Emission (AE) signals of the metal forming process
M.S. paper :온간성형에서 크리프 특성을 고려한 마그네슘 합금 판재(AZ31B)의 스프링백 특성 분석
Ph. D paper : 마그네슘 합금 판재(AZ31B)의 소성 거동 시 음향방출 및 기계학습을 이용한 항복과 파단 예측
(Acoustic Emission and Machine Learning-based Prediction of the Yield and Fracture Phenomena of Magnesium Alloy Sheet (AZ31B) Under Plastic Deformation)
Now working at FCI
Selected publication
Name : Murugesan Mohanraj (Research Professor, 2021-2023)
Research Topics : Plasticity and Formability; Sheet Metal Forming; Incremental Sheet Metal Forming; Cold Roll Forming; Machine Learning
Ph.D. in Mechanical Engineering (2021) - Jeju National University Advisor (Prof. Dong Won Jung)
Now working at KIMS
Selected publication
Name : 조성민 (Ph. D, 2022 // M. S. 2018)
Thesis title : 금속 성형 공정 최적화를 위한 기계학습의 응용
Now working at LG 에너지 솔루션
Selected publication
Sung-Mini CHO. Hyo-Dong KIM, Chun-Dal Park and Wan-Jin CHUNG (2022), "Effect of Strain Rate and Friction on Formability According to Major Deformation Modes in Sheet Metal Forming", Steel research InternationalM. S.
Name : 윤정식 (MS, 2026)
Thesis title : 유한요소해석과 실험을 통한 회전 다이의 변형특성 및 설계
Name : 최인규 (MS, 2025)
Thesis title : 음향방출 신호 및 기계학습 기반 판재 성형 공정의 결함 감지 및 파손 예측
Selected publication
Name : 목은빈 (MS, 2023)
Thesis title : Machine Vision을 활용한 재료 변형 측정 기술 개발
Now working at 브이엠에스 솔루션스
Selected publication
Name : 목은빈 (MS, 2023)
Thesis title : Machine Vision을 활용한 재료 변형 측정 기술 개발
Now working at 브이엠에스 솔루션스
Name : 윤형원 (MS, 2022)
Thesis title : 진공점진성형공정에서 다중공구경로 및 공구 반경에 따른 성형 특성 분석
Now working at 한국타이어
Name : 장카이 (MS, 2022)
Thesis title : 개질방법에 따른 내부 매니폴드형 MCFC의 운전 특성 분석
Now, working at Mingtian hydrogen energy technology (China)
Name : Piemaan Fazily (MS, 2019)
Thesis title : Characterization of Sheared Edge and Finite Element Analysis of Blanking Operation of Magnesium Alloy (AZ31B)
Now working at SAMSUNG SDI
Selected publication
- Piemaan Fazily, Jaehyung Yu, Chang-Whan LEE (2019), "Characterization of sheared edges in warm blanking of magnesium alloy AZ31B", Materials, 12(7), pp. 1203Name : 김현우 (MS, 2019)
Now working at LG 에너지 솔루션
Thesis title : 온간성형에서 변형률속도를 고려한 마그네슘 합금 판재(AZ31B)의 굽힘변형 특성 분석
Selected publication
김현우, 유제형, 이창환 (2019), "마그네슘 합금 판재(AZ31B)의 온도 및 성형속도에 따른 2D-draw 굽힘 특성 분석", 한국기계기술학회, 21(2), pp. 221-227김현우, 유제형, 이창환 (2018), "마그네슘 합금 판재의 온간 V-굽힘에서 소재의 변형 및보토밍 공정의 효과 분석", 한국소성가공학회지, 27(3), pp. 139-144이창환, 김현우, 유제형, 박근 (2018), "냉각 팬의 유동 특성을 고려한 압출적층형 3차원 프린터 노즐부의 열-유동 연계 해석", 한국정밀공학회지, 35(5)