M Jojare, R Tewari, Z Liu, HJ Lee, SH Lee, CK Choi, Harnessing machine learning for analyzing droplet evaporation in phase-change heat transfer, Journal of Flow Visualization and Image Processing, accepted.

D Lee, HJ Lee, S Lee, SH Lee, Influence of local perforations on heat transfer enhancement in inclined rib turbulators, International Journal of Heat and Mass Transfer, 2025, Vol. 255, pp. 127785. (IF: 5.8 Top 7.9%)

J Jin, HJ Lee, CK Choi, H Lee, SH Lee, Tailored control of evaporation flux for uniform coffee-ring patterns in multiple nanofluid droplets, Physics of Fluids, 2025, Vol. 37, No. 9, pp. 082133. (IF: 4.3 Top 6.1%)

WY Hwang, HJ Lee, J Jin, CK Choi, SH Lee, Analysis and modeling of paired droplet evaporation on heated substrates considering vapor-shielding and natural convection effects, International Communications in Heat and Mass Transfer, 2025, Vol. 168, pp. 109500. (IF: 6.4, Top 6.1%)

DJ Kim, J Jin, HJ Lee, CK Choi, SH Lee, Unveiling the role of coffee-ring effect in high-resolution rivulet-type conductive line formation, Langmuir, 2025, Vol. 41, No. 29, pp. 19562–19571. (IF: 3.9)

HJ Lee, J Jin, WY Hwang, CK Choi, SH Lee, Time-invariant characteristics of evaporating thin film during droplet evaporation, Physics of Fluids, 2025, Vol. 37, No. 6, pp. 062114. (IF: 4.3 Top 6.1%)

J Jin, HJ Lee, L Li, and SH Lee, Vapor shielding effect and selective evaporation analysis of paired unary and binary mixture droplets using surface plasmon resonance imaging and CFD predictions, Journal of Mechanical Science and Technology, 2024, Vol. 38, pp. 7027-7035. (IF: 1.5)

B A H M Bamunuarachchi, J Jin, HJ Lee, CK Choi, and SH Lee, Enhanced thin-film deposition uniformity during droplet evaporation: effects of graphene particle size and concentration, International Communications in Heat and Mass Transfer, 2024, Vol. 159, pp. 108292. (IF: 6.4, Top 6.1%)

WY Hwang, HJ Lee, J Jin, CK Choi, and SH Lee, Enhanced insights into paired droplet evaporation dynamics on heated substrates: Unveiling the role of convection and diffusion, International Communications in Heat and Mass Transfer, 2024, Vol. 157, pp. 107740. (IF: 6.4, Top 6.1%)

HJ Lee, H Wang, J Jin, AN Koya, CK Choi, L Li, W Li, and SH Lee, Design of a high-performance surface plasmon resonance device for effective measurement of thin liquid film thickness, Journal of Mechanical Science and Technology, 2024, Vol. 38, pp. 1-10. (IF: 1.5)

WY Hwang, HJ Lee, JH Jin, HS Ryou, CK Choi, and SH Lee, Computational design of a smoke detector with high sensitivity considering three-dimensional flow characteristics, Case Studies in Thermal Engineering, 2024, Vol. 53, pp. 103896. (IF: 6.4, Top 5.8%)

SH Yeom, KH Jang, HJ Lee, CK Choi, and SH Lee, Selective evaporation and contact line motions of evaporating ethylene glycol–water mixture droplets, Applied Thermal Engineering, 2023, Vol. 232, pp. 121040. (IF: 6.1, Top 5.2%)

HJ Lee, CK Choi, and SH Lee, Surface plasmon resonance imaging for analyzing the local variation of evaporation flux of multiple binary mixture droplets, International Communications in Heat and Mass Transfer, 2023, Vol. 146, pp. 106906. (IF: 6.4, Top 6.1%)

HJ Lee, CK Choi, and SH Lee, Vapor-shielding effect and the evaporation characteristics of multiple droplets, International Communications in Heat and Mass Transfer, 2023, Vol. 144, pp. 106789. (IF: 6.4, Top 4.4%)

KH Jang, SH Yeom, HJ Lee, CK Choi, and SH Lee, Volatility effect on internal flow and contact line behavior during evaporation of binary mixture droplets, International Journal of Heat and Mass Transfer, 2023, Vol. 207, pp. 124009.  (IF: 5.0, Top 9.7%)

JH Jin, SH Yeom, HJ Lee, CK Choi, and SH Lee, The effect of nozzle spacing on the electric field and fiber size distribution in a multi-nozzle electrospinning system, Journal of Applied Polymer Science, 2023, pp. e53764. (IF: 2.7)

HJ Lee, CK Choi, and SH Lee, Local heating effect on thermal Marangoni flow and heat transfer characteristics of an evaporating droplet, International Journal of Heat and Mass Transfer, 2022, Vol. 195, pp. 123206. (IF: 5.0, Top 9.7%)

KH Jang, HJ Lee, and SH Lee, Evaluation of surface temperature uniformity of multi-zone ceramic heaters with embedded cooling channels for electrostatic chuck, Journal of Mechanical Science and Technology, 2022, Vol. 36, pp. 1599-1606. (IF: 1.5)

HJ Lee and SH Lee, Numerical evaluation on surface temperature uniformity of multi-zone and single-zone heaters with the electrostatic chuck, Journal of Mechanical Science and Technology, 2021, Vol. 35, pp. 3763-3770. (IF: 1.5)

HJ Lee, CH Jeong, DY Kim, CK Choi, and SH Lee, Solid-liquid interface temperature measurement of evaporating droplet using thermoresponsive polymer aqueous solution, Applied Sciences, 2021, Vol. 11, pp. 3379. (IF: 2.5)

CH Jeong, HJ Lee, CK Choi, and SH Lee, Review of the binary mixture droplet evaporation studies, Journal of Mechanical Science and Technology, 2021, Vol. 35, pp. 5259-5272. (IF: 1.5)

CH Jeong, HJ Lee, CK Choi, and SH Lee, Selective evaporation rate modeling of volatile binary mixture droplets, International Journal of Heat and Mass Transfer, 2021, Vol. 178, pp. 121584. (IF: 5.0, Top 9.7%) 

CH Jeong, KG Kang, HJ Lee, UJ Park, HS Kim, JY Park, and SH Lee, Numerical investigation on the evolution of thin liquid layer and dynamic behavior of an electro-thermal drilling probe during close-contact heat transfer, Applied Sciences, 2021, Vol. 11, pp. 3443. (IF: 2.7)

UJ Park, KG Kang, HJ Lee, CH Jeong, JY Park, and SH Lee, Numerical analysis of the close-contact heat transfer of the electro-thermal drilling probes for glacier-ice exploration, Journal of Mechanical Science and Technology, 2021, Vol. 35, pp. 1309–1317. (IF: 1.5)

CH Jeong, HJ Lee, DY Kim, SB Ahangar, CK Choi, and SH Lee, Quantitative analysis of contact line behaviors of evaporating binary mixture droplets using surface plasmon resonance imaging, International Journal of Heat and Mass Transfer, 2021, Vol. 165, pp. 120690. (IF: 5.0, Top 9.7%)

HJ Lee and SH Lee, Effect of secondary vortex flow near contact point on thermal performance in the plate heat exchanger with different corrugation profiles, Energies, 2020, Vol. 12, No. 6, pp.1328. (IF: 3.0)

DY Kim, CH Jeong, HJ Lee, CK Choi, and SH Lee, Modeling of the finite boundary limit of evaporation flux in the contact line region using the surface plasmon resonance imaging, International Communications in Heat and Mass Transfer, 2020, Vol. 116, pp. 104598. (IF: 6.4, Top 6.1%)

HJ Lee, J Ryu, and SH Lee, Influence of perforated fin on flow characteristics and thermal performance in spiral finned-tube heat exchanger, Energies, 2019, Vol. 12, No. 3, pp. 556. (IF: 3.0)

J Lee, HJ Lee, J Ryu, and SH Lee, Three-dimensional turbulent flow and heat transfer characteristics of longitudinal vortices embedded in turbulent boundary layer in bent channels, International Journal of Heat and Mass Transfer, 2018, Vol. 117, pp. 958-965. (IF: 5.0, Top 9.7%)

HJ Lee, J Park, SH Lee, Numerical investigation for influence of fan speed and swirling gas injection on thermal-flow characteristics in nitrocarburizing furnace, Materials Transactions, 2017, Vol. 58, No. 9, pp. 1322-1328. (IF: 1.2)

이형주, 이성혁, 한 쌍 액적의 초기 접촉각 변화에 따른 증기 차폐 특성, 한국분무공학회지, 2025, Vol. 30, No. 1, pp. 41-48.

이형주, 황원영, 김정호, 최창경, 이성혁, 가열된 표면에 고착된 한 쌍의 액적 증발 특성, 한국분무공학회지, 2023, Vol. 28, No. 3, pp. 113-118.

정찬호, 이형주, 최창경, 이형순, 이성혁, 표면플라즈몬 가시화 장치를 이용한 증발하는 이종혼합물 액적의 실시간 농도 가시화 기법 개발, 한국분무공학회지, 2021, Vol. 26, No. 4, pp. 212-218. 

정찬호, 이형주, 김홍석, 이성혁, 액적 체적이 증발 특성에 미치는 영향에 관한 수치해석 연구, 한국분무공학회지, 2021,  Vol. 26, No. 2, pp. 88-95. 

정찬호, 이형주, 윤국현, 이성혁, 가열된 표면에 고착된 액적의 증발 특성에 관한 수치해석 연구, 한국분무공학회지, 2021, Vol. 26, No. 1, pp. 1-8. 

이형주, 정찬호, 이성혁, 이재빈, 김대윤, 문주현, 소수성 구리 표면에서의 액적 응축에 관한 액적 성장 및 열전달 특성 연구, 한국액체미립화학회지, 2018, Vol. 23, No. 3, pp. 149-153.

박지민, 문주현, 이형주, 이성혁, 필름 냉각을 위한 리브드 채널의 홀 위치에 따른 열전달 특성 수치 해석, 한국산학기술학회논문지, 2018, Vol. 19, No. 9, pp. 69-76

이형주, 김대윤, 이성혁, 나노입자 크기에 따른 나노유체 액적의 증발 열전달 특성, 한국액체미립화학회지, 2017, Vol. 22, No. 1, pp. 36-41.