How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a purpose-built gaming headset with a boom mic and a physical volume slider for console and PC play, choose ADVANCED SOUND GROUP NSMO JR 2-Driver; if you need a music-first in-ear monitor with a bigger dynamic driver, a detachable cable and a more refined fit for long listening sessions, choose Linsoul TANGZU Wan'er S.G.
• ADVANCED SOUND GROUP NSMO JR 2-Driver — biggest strength: dual 6mm dynamic drivers tuned for positional in-game audio, plus a detachable boom mic and an in-line remote with an analog volume slider and mic mute switch.
• ADVANCED SOUND GROUP NSMO JR 2-Driver — biggest trade-off: it's a wired 3.5mm headset built around gaming chat and control, not a music-first IEM, so it leans on plastic and a rounded-tip earpiece rather than an audiophile shell.
• Linsoul TANGZU Wan'er S.G — biggest strength: a single 10mm PET-diaphragm dynamic driver in an updated, ergonomic shell with SANCAl eartips, passive noise isolation and a detachable 0.78mm 2-pin OFC cable.
• Linsoul TANGZU Wan'er S.G — biggest trade-off: it has no boom mic and no in-line volume slider on the wired version, so competitive chat and on-the-fly control are not its focus.
• Who each pick is for: the NSMO JR suits console and PC gamers who want voice chat and a mute switch within reach; the Wan'er S.G suits listeners and mobile gamers who want a comfortable IEM that doubles as a music earphone.
The NSMO JR is built around one idea: accurate positional audio for gaming. It uses two proprietary tuned 6mm dynamic drivers, and the spec sheet lists a 16 ohm impedance with a 20Hz–20kHz frequency range. Two small drivers per side is an unusual choice for a headset — the point is stereo imaging and spatial accuracy, so footsteps, gunfire and directional cues land where the game puts them. That's the design intent, and it's the reason this thing exists.
Then there's portability. The form factor is compact, and it ships with a plastic carrying case that fits in the palm of your hand but still holds the accessories. Compatibility is broad — Xbox Series X/S, PS5/4/3, Xbox One, Nintendo Switch, PC, Mac, and phones or tablets with a 3.5mm jack. Note the wired 3.5mm connection is the only option, so devices without a headphone jack need an adapter.
Buy it if you play on console or PC, you want a boom mic you can remove, and you want volume and mute within thumb's reach. Skip it if you mainly want an earphone for music, or if you need wireless — there is none here.
Linsoul TANGZU Wan'er S.G: Who It's For
The Wan'er S.G II is a second-generation in-ear monitor, and the spec sheet tells you where the work went. It runs a single 10mm dynamic driver with a PET diaphragm inside an upgraded driver chamber. Impedance is 19 ohm, sensitivity is 113.5 dB, and the range is 20Hz–20kHz. The tuning goal, per the brand, is a balanced signature that keeps the smooth, full-bodied tonality of the original while adding clarity and top-end detail — with the upgraded chamber helping hold distortion down and extend the highs.
Fit is the other headline. The shell shape was redesigned around ear-anatomy research, and it's paired with patented SANCAl eartips. The result is meant to be a secure, ergonomic seal that lets you listen for hours without fatigue — and that seal is also what gives you the passive noise isolation. For an IEM, a good seal is most of the job; it affects both comfort and how much bass you actually hear.
The cable is genuinely nice for this class: a 1.2m 5N OFC braided cable with a 0.78mm flat 2-pin connector. That flat connector is a change from the raised 2-pin on the first generation, and it makes for a sturdier, lower-profile joint. Because it's detachable, you can swap cables later. The enclosure is plastic, the earpiece shape is a bud, and there's a 1-year warranty. The 3.5mm version has a mic and remote control, so calls and basic playback control work — but there's no boom mic and no physical volume slider.
Side-by-Side: Which Should You Choose?
• Best for positional gaming audio → ADVANCED SOUND GROUP NSMO JR 2-Driver, which is explicitly tuned for spatial accuracy with dual 6mm drivers.
• Best for music listening → Linsoul TANGZU Wan'er S.G, with its 10mm PET-diaphragm driver and balanced, detail-forward tuning.
• Best for voice chat → NSMO JR, thanks to the detachable boom mic with its low/high-frequency filtering.
• Best for on-the-fly control → NSMO JR, for the in-line analog volume slider and mic mute switch.
• Best for long listening sessions → Wan'er S.G, based on its redesigned ergonomic shell and SANCAl eartips.
• Best for noise isolation → Wan'er S.G, which relies on passive noise cancellation from a proper in-ear seal.
• Best for cable flexibility → Wan'er S.G, with its detachable 0.78mm 2-pin OFC braided cable.
• Best for console and PC compatibility → NSMO JR, which lists Xbox, PlayStation, Switch, PC and Mac support on a 3.5mm jack.
• Best for travel → NSMO JR, which includes a palm-sized carrying case for the headset and its accessories.
If I had to pick one, I'd buy the Linsoul TANGZU Wan'er S.G. In my opinion it's the more versatile everyday earphone: the 10mm PET driver, the redesigned ergonomic shell and the detachable OFC cable make it the better fit for someone who listens to music all day and games on the side. The NSMO JR is the smarter buy only if competitive voice chat is your priority — the detachable boom mic, mute switch and volume slider are things the Wan'er simply doesn't have. Buy the ADVANCED SOUND GROUP set if you're a console gamer first; buy the Wan'er S.G if you're a listener first.
FAQ
It's tuned for positional in-game audio with two 6mm drivers, so it handles music fine but isn't voiced for critical listening. The Wan'er S.G, with its 10mm PET-diaphragm driver, is the more music-oriented pick.
Yes — the 3.5mm version with mic includes a remote and microphone for calls and playback control. It does not have a detachable boom mic, so it's less suited to loud competitive voice chat than the NSMO JR.
The Wan'er S.G relies on passive noise isolation from its in-ear seal and SANCAl eartips. The NSMO JR uses sound isolation with a rounded-tip earpiece, which typically seals less deeply than a proper IEM fit.
The NSMO JR is the safer pick for consoles: it lists Switch, PlayStation, Xbox, PC and Mac compatibility over 3.5mm, and gives you a mute switch and volume slider. Check the current price on Amazon before you decide, since that's the one thing that can tip the choice either way.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: touch control headphones, MIDOLA Active Noise Cancelling vs MAIJOFO Open Ear Earbuds, true wireless earbuds, KTGEE Earbuds vs Generic EUQQ